Electricals Store - Electric Motors

• Air Cooled Spindle-- Power: 500W; Idling Speed: 2000-12000r/min; Torque?0.5NM; Diameter: 52mm.
• Speed Controller: Input Voltage: AC100-AC220V?10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast).
• Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
• With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
• Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!

• Parameters: Power:2.2KW; Horsepower: 3HP; Input Voltage: 220V+/-15%; Output Voltage: 220V; Input Frequency: 50-60 Hz; Output Frequency: 0-1000 Hz; Input Phase: Single-Phase; Output Phase: Three-Phase; Current: 12.5A
• Features: no PG vector control and V/F two speed control modes;8-stage simple PLC function, multi-speed control and PID control;Support multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting
• Functions: I/O terminals can be programmed to combine multiple working modes according to user needs; With instantaneous power-down retention function;With over torque and under torque detection
• More Functions:Automatic voltage adjustment function to effectively solve the low frequency oscillation problem of high power motor;Provide a variety of fault protection functions: overcurrent, overvoltage, undervoltage, overheat, overload, lack of equal etc
• Wiring: L/N: Input power terminal; U / V / W: Input output terminal, connected to three-phase motor;DC+ / DC- : DC output + terminal, DC bus output terminal is used for connecting external brake unit or common DC bus system.;DB: Brake output terminal, connecting brake resistor between DB and DC+; PE: Earthing terminal

• Rated Voltage: 27 vdc
• Rated Power: 60 Watts
• Rated RPM: 50 RPM
• Rated Torque: 4.4 ft-lb (6 N-m)
• Sprocket Standard: ANSI/ISO #35 to fit roller chain #35 (Pitch 3/8\", Roller Diameter 0.200\", Roller Width 3/16\")

• Single-zone controller is compatible with Furrion single-zone basic / premium wall thermostat
• Multi-zone controller is compatible with Furrion multi-zone wall thermostat
• Detachable filters for easy cleaning
• Compatible with both ducted and non-ducted systems

• Genuine OEM replacement part
• Manitowoc Beverage provides state of the art ice machines for the foodservice and beverage industry
• Use genuine OEM parts for safety reliability and performance

• Measures 3.1 inches diameter (78 mm) by 5.8 inches long (147 mm)
• No-load rpm: 5700 at 24 volts; Can be used with voltages ranging from 12V to 36VDC
• Maximum power: 1580 watts (2.1 horsepower); Maximum stall torque: 10.6 Nm (1500 oz-in)
• Peak efficiency at 24V: 79% at 29 amps and 5100 RPM
• Power and torque at peak efficiency: 555 watts (0.75 horsepower) and 1030 mNm (145 oz-in)

• Application: 24V AC spring-return actuator, designed specifically for ARD, EARD, and ZD residential zone dampers
• Precise Control: Adjustable minimum and maximum range stops allows control of the temperature to tailor the HVAC damper to individual needs
• Perfect Replacement: Suitable replacement motor for ARD and ZD dampers; direct replacement for M847D1004
• Efficient Operation: 30 seconds power open / 10 seconds spring return, low-voltage, power closed and spring open
• Easy Installation: Included extensions allow for direct mounting to 7/16 inch diameter coupling-style dampers.The following wires to Motor Terminals: M1-Power, M6-Common, M4-Optional LED indication
• Non-original aftermarket part

• Bracket Type 4 holes screw Type steel
• Contact rating amps 35
• Pick-up Voltage 325 to 345

• Auto Start Timer: Once the starter is connected to electricity, you can set a delay time as per your choice for the starter to turn on. For example, if you set the Auto Start Timer to 1 hour and turn on the Auto Switch, the starter will switch on automatically after 1 hour once the power comes online.
• On/Off Cycle Timer: You can program your starter to start or stop for a set duration. For example, if you want to run the motor for 2 hours and then stop for a 1 hour gap, you can simply set the timing and turn the auto switch on, and the starter will repeat the cycle automatically until you manually switch off the starter.
• Dry Run Protection: Safeguard your motor against damage caused by low water levels with built-in Dry Run Protection. Detecting overheating or overload situations, the starter swiftly intervenes by shutting down the motor, preventing potential harm. Additionally, customize delay times for motor refilling, ensuring continued operational efficiency.
• Overload Protection: Mitigate the risk of motor overheating and burning with comprehensive Overload Protection. Regardless of the factors causing overload, rest assured that your motor is shielded from harm, ensuring uninterrupted performance.
• Rotor Lock Protection: Detect and prevent potential damage caused by foreign objects or substances accumulating within the motor. By promptly identifying rotor lock situations, the starter safeguards the motor from harm, maintaining optimal functionality.

• 37359MC

• Four Seasons 35087 Condenser Fan Motor (35087)