Electric Motors By Bringsmart

• Model Number:60KTYZ, Voltage:AC 110V, Speed: 10rpm, Input Power:18W, Current: 0.11A, CW/CCW(controllable), Motor Size:60 x 60mm.
• This product is a claw-pole permanent magnet synchronous motor with built-in gear reduction mechanism. It is also called gear reduction synchronous motor. It can be rotated counterclockwise or clockwise by adjusting the wiring method. This motor has characteristics of low power consumption, large torque, low noise, light weight and convenient to use.
• The output shaft is supported by two ball bearings, the axial sway is less than 0.3mm, the noise is low and there is no abnormal noise, and the motor runs smoothly and reliably.
• This is a Synchronous gear motor operates on AC 110V. Low noise and more robust. It is an electric motor widely used for household, hand-made, school project, model agitated beverage machines, low-speed machines, animated dolls, fiber optic Christmas tree, tumbler cup, rifle case creep, electric fireplace, modeland anything else you want.and its performance is stable and reliable, and it is trusted by users.
• Note: The motor will heat up after working for a while. This is a normal phenomenon, does not affect the motor life and normal use. Please do not touch the motor shell with your hands when the motor is working to avoid being burned.

• [Parameter] Voltage DC12V, No load speed 5rpm, Load speed 4rpm, Load torque 23.4kgf.cm, Load current 0.6A, Stall current 1.65A, Power 10W.
• [Package] 1pcs JGB37-520 gear motor, 1pcs 37mm mounting bracket, 6pcs M3 screws for locking motor and bracket, 4pcs M3 screws and nuts for mounting bracket, 2pcs 4.8mm reed terminal and sheathed female connector for connecting motor to wires.
• [Features] All Metal Gears, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable. Steel 5.5mm D Output Shaft, using high hardness steel, good toughness, impact resistance. Pure Copper Rotor. with precision winding technology, the geared motor power instant increased by 30%.
• [Notes] 1, If the motor does not work properly, it may be because the electrode piece may be knocked into the motor during transportation due to collision, causing connection problems. Gently pull out a little and try again. 2, the no-load speed of the motor itself has an error of 10% floating up and down. At load, the motor speed will also drop to the load speed. 3, this motor can not work continuously for a long time, please be able to rest for 5 minutes after working for 5 minutes. To ensure the normal life of the motor.
• [Insurance] Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us! If you have any question about the motor, please also contact us. We will try our best to reply you asap.

• ALL-METAL GEARS, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the turbo worm gear box motor body.
• D SHAPED OUTPUT SHAFT, using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the turbo worm gear motor are improved, extremely durable
• GEAR DC MOTOR with MICRO-TURBINE WORM, you can change the wiring-connection to change motor rotation. Low noise and high torque.
• Application: Label machines, remote control curtains, automatic voltage regulators, barbecue grills, ovens, washers, waste disposal machines, household appliances, coin machines, paper currency recognizers, automatic actuators, coffee machines, towel machines, printing machines and Stage lighting. This section is suitable for small motor configuration high speed ratio, the installation space is limited occasions, large torque output.

• Voltage: 110V AC, Speed: 10rpm, Power: 6-10W, Size: 50*38mm
• Synchronous motor is small power consumption, torque, low noise, small size, light weight, easy to use.
• Wiring method: Connect the two yellow wires together to one end of the power supply, and connect the green wire with the red wire to both ends of the resistor. If the other end of the power wire is connected to one end of the red wire and the resistor, the motor is rotating positive. If the other end of the power line to the green wire and the end of the resistor, the motor reverses.

• Rated voltage-12V DC, No load speed-16rpm, no load current-350mA, Rated speed-12rpm, rated torque-70kg.cm, rated current-1.6A, Reducer ratio-1:505.10KG.CM torque means that the motor can drive an object with a distance of 1cm from the center of the shaft and a weight of 10kg. If the distance is 10cm, the weight of the object is 1kg. If the weight of the driven object is greater than the rated load, the motor speed will slow down and the motor may be damaged.
• Feature: The motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation. -Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixed, self-lock. -The reducer output shaft arranged vertically with the motor shaft, whole motor output
• Application: bank equipment, safe box, paper feeder, intelligent gas meter, tissue machine, accessory of automobile, ad equipment, analysis instrument, electronic game machine,electrical appliances including remote control curtains, locks, paper shredders, copying machines, and safes Inner.
• What You Get: 1pcs x DC Geared Motor; if you need other voltage and rpm, pls contact us, there are many other models of this motor in store.
• Quality Guarantee: Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us! If you have any question about the motor, please also contact us. We will try our best to reply you asap.