Electric Motors By uxcell

• Package includes: 1pcs silver tone turntable synchron motor.
• Detailed parameters: the power is 4 watts; Frequency is 50-60 Hz; Manner of working is CCW; AC voltage range is 24V; Rotating speed is 5-6 R per minute.
• Practical to use: the synchron motor has small power consumption and large torque which is convenient to use; Low noise and easy to install.
• Size: the turntable synchron motor is 1.96 inch/ 50mm in diameter, 0.78 inch/ 20min height; The blue cable is 0.08 inch/ 2 mm in diameter, 16.14 inch/ 410mm in length.
• Applications: the synchronous motors are good tool for hand-made, DIY project; Suitable for home appliance, heater machine, electric fan, Christmas tree, air conditioner, massagers, dynamic visualizer, arts and crafts lighting, popcorn machine, etc.

• Benefiting from high torque and low noise, give your DIY project a new life!
• This motor is solidly constructed and ready to install in numerous applications.
• This motor is reversible so that you can switch positive and negative.
• High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.
• Rated Voltage: DC 12V,Rated Speed: 63RPM, 1.62kg.cm Loading Torque, 7.3kg.cm Stall Torque ,80mA No-Loading Current ,140mA Loading Current,Mounting Hole Size: M3.

• Features: Rated Voltage: 3V, Speed: 50RPM ?5%, Shaft Diameter: 3mm, D Shaft, Shaft Length: 9mm ;Package Includes: 1pcs GA12-N20 DC Geared Motor with Encoder Test wire
• APPLICATION: Great replacement for the rusty or damaged DC geared motor, Great for speed control,widely used on small robots, etc.
• ADVANTAGE 1: and light weight geared Electric Motor, Benefiting from high torque and low noise,Small volume,big torsion.Good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.
• Gear motors can be found in many different applications. Such as for DIY RC Hobby, car module, planes and more.
• Please check the current and voltage of the motor before use, and do not overload it

• QUALITY UPGRADED - Galvanized surface treatment, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body. With precision winding technology, the geared motor power instant increased by 30%.
• Specification: No-load Speed: 33RPM at 24 Volts; kg.cm: 3 Power: 7.2W; No-load Current: 0.1A; Load Current: 0.3A; Reduction rate: 1: 148 D Shaft Size: 15mm x 5.9mm/0.59 x 0.23 inches (L*D); Gearbox Size: 27mm x 36.8mm/ 1.06 x 1.46 inches (L*D); Motor Size: 33mm x 35.3mm/1.30 x 1.39 inches (L*D); Mounting Hole Size: M3 (not included).
• GREAT LITTLE MOTOR - Small size dc gear motor with low noise and high torque, make your DIY projects full of vitality! This motor is solidly constructed and ready to install in numerous applications.
• SPEED ADJUSTABLE - The speed can be adjusted by dc motor speed controller, but if you need a lower or higher speed motor, pls choose the right rpm meets your needs. This motor is reversible so that you can switch positive and negative.
• WHAT YOU GET - A pretty small little motor, has gear reduction box and motor in one small but very well built package.

• Zero backlash. Two-piece metallic spring coupling. For little torque shaft connect.
• Color: Silver Tone; Material: Aluminum Alloy; Connection Diameter: 7mm to 8mm; Screw Angle: 90 degree;Total Length: 30mm /1.18 inch;Outside Diameter : 25mm /0.98 inch
• Absorption of parallel, angular misalignments and shaft end-play by spring action.
• Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required.
• Package Content: 2 x Shaft coupling

• Country of Manufacture: CHINA; Material: Metal,Electronic Parts; Net Weight: 146g
• Package Content: 2pcs x Micro Vibration Motor; Main Color: Gray
• Product Name: Micro Vibration Motor; Rated Voltage: DC 12V
• Output Speed: 4500RPM; Body Size: 27 x 38mm/1.06\" x 1.49\"(D*H)
• Total Length(Approx.): 57mm/2.24\"; Shaft Diameter: 2mm/0.08\"

• Thread Size: M3; Rated Voltage: DC 12V; Rated Speed: 3000RPM
• Total Length: 46mm / 1.8 inch; Body Size: 24.2x30mm / 1x1.2 inch (D*H); Vibrating Wheel Size: 24x17x5mm / 0.9x0.7x0.2 inch (L*W*H)
• Miniature vibrating motors are used in a wide range of products, such as tools, scanners, instruments, and control sticks, massager. OR Make about equipment vibrate to remind and warn, such as mobile phones and alarms; vibrate as a power source, such as some robots; vibrate to prevent accumulation and retention of objects, such as various hopper, feeders, etc
• Metal vibraten head: it has the advantages of corrosion resistance, rust resistance, stable transmission rate, heat resistance and low noise; Pure copper coil, with good electrical conductivity, wear resistance, high-temperature resistance, and stable rotating speed; good carbon brush; Durable, wear-resistant, not easy to burn and rust
• Note: 1.Vibration is easy to cause looseness, so it is necessary to confirm whether all parts of the equipment are firmly installed;2.The vibration speed of some vibration motors increases with the increase of voltage. It is necessary to note that the motor is damaged due to excessive temperature rise.

• Features: Rated Voltage: 6V, Speed: 200RPM ?5%, Shaft Diameter: 3mm, D Shaft, Shaft Length: 9mm ;Package Includes: 1pcs GA12-N20 DC Geared Motor with Encoder Test wire
• APPLICATION: Great replacement for the rusty or damaged DC geared motor, Great for speed control,widely used on small robots, etc.
• ADVANTAGE 1: and light weight geared Electric Motor, Benefiting from high torque and low noise,Small volume,big torsion.Good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.
• Gear motors can be found in many different applications. Such as for DIY RC Hobby, car module, planes and more.
• Please check the current and voltage of the motor before use, and do not overload it

• Product Name : Carbon Brush;Carbon Brush Size (Approx) : 12x 8x 5mm(L*W*H)
• Total Length(flat) : 33mm
• Material : Carbon , Metal
• TotalWeight : 23g
• Package Content : 4 Pairx Carbon Brushes

• Rated Voltage: DC 6V; Motor Rotary Speed: 5RPM+/-10%
• Shaft Size: 5 x 8mm/0.2 x 0.31inch(Dia*L); Cable Length: 120mm/4.72inch
• Stable and reliable performance. Low noise, high speed, high efficiency, low resistance.
• Apply to reduce speed in a series of gears, which in turn creates more torque
• Widely used on Stage lighting, alarm, electric device and so on etc...

• Package includes: 1pcs silver tone turntable synchron motor.
• Detailed parameters: the power is 4 watts; Frequency is 50-60 Hz; Manner of working is CCW; AC voltage range is 12 V; Rotating speed is 5-6 R per minute.
• Practical to use: the synchron motor has small power consumption and large torque which is convenient to use; Low noise and easy to install.
• Size: the turntable synchron motor is 1.96 inch/ 50mm in diameter, 0.78 inch/ 20min height; The blue cable is 0.08 inch/ 2 mm in diameter, 16.14 inch/ 410mm in length.
• Applications: the synchronous motors are good tool for hand-made, DIY project; Suitable for home appliance, heater machine, electric fan, Christmas tree, air conditioner, massagers, dynamic visualizer, arts and crafts lighting, popcorn machine, etc.

• [Specification] - Voltage: AC 24V; Speed: 30-36RPM; Frequency: 50-60Hz; Power: 4W; Direction: CW/CCW; Torque: 0.8kgf.cm; Wire Length: 40cm/ 15.7 inch.
• [Typical Applications ] - heater machine / electric fan / Christmas tree / Air conditioner / Massagers / Dynamic Visualizer / Arts & Crafts lighting / popcorn machine.
• [Show Your Style] - An Good Motor For Hand-Made, DIY Project, Model And Anything Else You Want.
• [Features] -AC motor is small power consumption, torque, low noise, small size, light weight, easy to use.
• [Advantage] - The permanent magnet synchronous motor and the slowdown in one body can control the pros and cons of the synchronous motor.At rated frequency, the motor speed is not affected by voltage and remains stable. If the motor is overloaded or stalled, the motor coil will not burn.

• Product Name : Stepper Motor;Material : Metal
• Motor Body Size : 10 x 11mm / 0.4\" x 0.43\"(D*L);Screw Length : 57mm / 2.24\"
• Screw Rod Dia : 3mm / 0.12\";Drive Voltage : DC 3-6V
• Color : Silver Tone;Weight : 14g
• Package Content : 1 xStepper Motor