Industrial & Scientific Store - Additive Manufacturing Products

• Outside Diameter: 8mm; Thread Type: Square Thread (ACME Trapezoidal)
• Length: 200 mm; Pitch: 2mm (Single Start Threads)
• Rod Material: Stainless Steel; Nut Material: Brass
• Qty: 2pcs Tr8x200mm Rod + 2pcs Brass Nut
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• Model: LMK12UU
• Material: Steel
• Inner Dia.: 12mm; Outer Dia.: 21mm
• Square Hight: 6mm ; Total Size: 30x32x32mm
• Included: 1x LMK12UU Linear Bearing ; Net Weight: 57g

• Material: PLA
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 30 meter; Diameter: 1.75mm
• Color: Gold ; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:5 meter each; Diameter: 1.75mm
• Colour: Pink, Green, White, Orange, Blue; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's colour may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.

• Stainless Steel rust-free material
• Usage: 3D Printer Head Bed Leveling
• Outer Diameter (OD): 7.4 mm; Inner Diameter (ID): 5.4 mm
• Length (MM) : 40 mm

• Printing Area 60x30mm Up to 4 Lines Print
• Permanente Ink which works in all surface, like metal, plastic, oily, anti freeze , anti heat , glass
• Works only for Flat Surface
• Extra Long life metal body and Rubber Letter
• Package Content :- Batch Coding Machine , Letter Kit 3mm, 100ml Black ink, 100 ml Ink Solvent And Extra 1 Ink Pad.

• Material: Brass; Thread Type: M8 Metric Thread
• Pitch: 1.25mm; Inside Diameter: 8mm; For actual dimension please see diagram in photos
• Note: Threads are Metric M8, not 8mm TR8 Lead Screw. Please contact us before order for any doubt.
• Application: 3D Printer, CNC, Robotics, DIY Projects etc
• Package Include: 4 x M8 T-Nut

• Durable with alloy steel material, strong mounting and easy to install.
• This mounting bracket is manufactured by integral forming of 2.8mm steel plate and welds fixed bar on each side of the holder, strong and tough.
• Mounting Holes: The distance from the center of the hole to the ground is 30mm, all slotted and holes openings are made of high-precision punch press once stamping, ensureing that absolutely the dimensions are absolutely accurate and precise, and with the motor fit tightly.
• Our motor fixed seat adopts advanced anti-rust paint technique, which makes the bracket be used for a long-term.
• Package Included: 1pcs mounting bracket, 4pcs M3 mounting screws.

• Mechanical Endshop Limit Switch with 70cm 3-Pin Connecting Cable High Quality Switch Element: Made of 22AWG wire, thick copper wire resistant to 2A current 300V voltage, up to 80 degree large temperature range of insulating layer.
• Suitable for RepRap 3D Printer or CNC tool, supporting by RepRap electronics, RMAPS 1.4 and other common used RepRap board. 22AWG connecting line, thick internal copper core, withstanding 2A current, 300V voltage. Max insulation temperature of insulating layer up to 80 degree
• Convenient to Use: Equipped with 3Pin male/female connector head, plug and play, easy to install.
• Red line connect to VCC (ramps +), Black line connect to GND (ramps -), Green line connect to SIGNAL (ramps s)
• Easy to install, hard to snap, convenient to plug or release.

• Color Print Speed:Normal: 100mm/s, Limit: 180mm/s
• Printing Size: 220*220*250mm
• Filaments: 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon
• Layer Thickness: 0.05-0.4mm
• Nozzle Diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)

• When there is material, the level signal of the detection port should be high. When there is no material, the level signal of the material port becomes low, and the system detects one. If the high to low conversion is determined, the material is consider
• Suitable for 3D printer run-out, pause detection.
• Use on lerdge board: the green light for the module is always on when material is available. When the material is used up, the green light goes out. The main board executes the pause command operation and waits for the personnel to replace the material.
• Lerdge main board wiring: M sensor port on the main board.
• For other boards: material detection module uses level jump detection Use on lerdge board: the green light for the module is always on when material is available. When the material is used up, the green light goes out. The main board executes the pause command operation and waits for the personnel to replace the material.

• 5 Optional Subdivision: Full, 1/2, 1/4, 1/8 and 1/16
• Type: A4988 Step Stick Stepper Motor Driver Module
• Output Drive Capacity: Up to 35V and +/- 2A; Compatible Logic Supply: 3.3V, 5V
• Applications: Need to drive stepper motors. It is to build a 3d printer, cnc, engraving machine and other essential modules.
• Safety: Crossover-Current Protection, Overheat Shutdown Circuit Protection, Ground Connection Short-Circuit Protection, Load Short-Circuit Protection, Crossover-Current protection.

• Thermistor Color : white,Cartridge Heater Material: 304 Stainless Steel
• Voltage: 24v, Power: 40w,Diameter: 6mm ; Length: 1M
• Temperature sensor 100K? accuracy of ? 1%
• Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
• Package Included: 3pcs x 1M 24V Cartridge Heater; 3pcs x 1M NTC Thermistor

• Extremely hard
• Plasma-polished nozzle
• Extremely long life
• With a special coating
• Easy to install and change.

• Inner Diameter: 8mm
• Outer Diameter: 16mm
• Thickness: 5mm .
• Easy Installation & Replacement
• Less Friction, Higher Speeds

• Product Name: Linear Rail Shaft Support; Model: SK16
• Material: Aluminum; Color: Silver Tone
• Fit for Shaft Dia.: 16mm; Total Size: 48 x 16 x 44mm (L*W*H)
• Mount Hole Distance: 38mm; Mount Hole Dia.: 5.5mm/0.22-inch
• Package Content: 2pcs x Linear Rail Shaft Support