Industrial & Scientific Store - Additive Manufacturing Products

• Material: PLA
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length:30 meter; Diameter: 1.75mm
• Color: Silver ; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• 25 DIFFERENT TYPES OF 3D FILAMENT
• Bright colors , Eco friendly, high strength
• 10 METER EACH 3D FILAMENT
• Trial pack for RnD and analysis
• Save money by investing on Trial pack

• Nozzle Input Diameter: 1.75mm, Output Diameter: 0.2mm 0.4mm 0.6mm 0.8mm
• Installation- external M7 thread connection for 1.75mm PLA ABS printer
• Smooth mating face, effectively prevent filament from leaking
• Chamfer design, much easier for filament feeding
• Bright brass nozzle appearance, Carved Nozzle diameter size, easier to be identified

• High temperature plated heater block is made of durable copper alloy material. It was milled with high precision therefore quality of material id very good
• Package and size: Heater block comes only in one piece. Sizes of product are 20 x 24 x 11.5 mm or 0,8 x 0,95 x 0,45 inches.
• Threaded tube hole is M6, thermocouple mounting hole is M3. Working perfectly with everyday filaments like PLA, ABS and spool Works EDGE.
• These blocks are specially engineered for ultimate high temperature performance. Max rated temperature: 500
• The plated copper upgrades your V6 or Aero Hot End to print bigger, faster and stronger parts. Easily swaps your V6 heater block and nozzles for large-scale 3d printing

• NOTE: 1>This product is rated for use with PLA filaments O
• NLY. Any use with filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force ov
• may experience malfunction or decrease in magnetic force over time. This will NOT prevent prints from warping. 2> This product is not for use with high-temperature printing applications above 70*C.

• Fine sizes assorted - 0.15 mm, 0.25 mm, 0.35mm, 0.4 mm and 0.5 mm cleaning needles not only suitable for most of sizes nozzle but also they can use for cleaning other small parts, such as throat and feeder gear
• Premium material - SIQUK 3D printer nozzle cleaners are made of premium stainless steel material, sturdy, durable and flexible, easy to twist
• Wide compatibility - compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap
• Free gift - come with 2 different shape precision tweezers and 1 piece cleaning cloth, help you cleaning excess filament gear material and keep nozzles clean
• Package include - there are 30 pieces 3D printer nozzle cleaning needles in 5 different size, 2 pieces different sharpe precision tweezers and 1 piece cleaning cloth, totally 33 pieces nozzle cleaning kit

• RobotDigg Equip Makers, Empower Engineers
• Fit for Torque Transmission and Light Load Conveyance
• Working Tension: 111 N for 25.4 mm Belt (25 lbs. for 1\"belt)
• Breaking Strength: 86 N per 1 mm (62 lbs. per 1/8\") Belt Width
• Temperature Range: -34 degreeC to +85 degreeC (-30 degreeF to +185 degreeF)

• Compatible with Snapmaker 2.0 3D Printing Module
• 0.4 mm brass nozzle
• Covered by silicone sock, isolating heated parts to stabilize the temperature and provide protection
• Nozzle material: copper
• Nozzle diameter: 0.4mm

• Model Number : PC4-M6
• Thread Size : M6; Material : brass & plastic
• Compatible with 4mm outer diameter tube
• Use: Bowden extruder in Creality and other 3D Printer Extruder
• Package Include: 10 x PC4-M6 Pneumatic Fitting

• Material: stainless steel
• Lead screw diameter: 8mm
• Screw pitch: 2mm
• Lead of thread: 8mm; Lead screw length: 300mm
• Package included: 1 x T8 Lead Screw; 1 x Copper Nut

• The 3D printer controller board is based on RAMPS 1.4.
• The 3D printer reprap board package contains 1 RAMP, 1 PBT, 15 Jumpers
• RAMPS 1.4 reprap control board interfaces a Mega Board compatible with arduino and has plenty room for expansion.
• The 3D Printer controller board has provisions for the Cartesian robot and extruded. Imported from Hong Kong
• Servo style connectors are used to connect to the end stops, motors, and LED's.

• Flashforge FDM 3D Printer Build Plate Sticker

• MULTIPLE NOZZLE DIAMETERS : Smooth surface without glitches, clean lettering and easy to identify the compatible nozzle tip size
• EXQUISITE PACKING : The nozzle is placed in a round iron box and fixed in a high-quality foam,which effectively protect the nozzle and prevent the nozzle from being scattered in daily work, and also convenient to use
• ROUND NOZZLE WITH CHAMFER CRAFT : Round nozzle with chamfer craft reduces the resistance to filament, so that the filament come out smoothly, feed in easier, and rarely block the nozzle

• Application: Great for linear motion on 3D printer, CNC, and other applications
• Single Size: Inside diameter: 8mm(0.31in), outside diameter: 15mm(0.59in), total length: 24mm(0.94in)
• Usage: Ball in the cage loop to run a smooth ball guide surface to ensure even if high-speed operation, low noise
• Material: Made of high quality steel, durable and sturdy for use
• Usage: Great for you to replace the damaged ball bearings in your devices to improve efficiency and save energy

• This lead screw nut is manufactured with best quality copper and compact workmanship.
• This copper made screw nut is designed with lead screw diameter of 8mm and pitch of 2mm.
• The 8mm lead screw nut is best suited for 3D printer Z axis 8 mm stainless steel 4-Start lead screw.
• It is compatible as a RepRAP 3D printer accessory and CNC machine parts.
• The package includes: 1 x 8mm T Type Lead Screw Copper Nut

• 1.75mm Diameter high quality PLA filaments Compatible with wide range of 3D Printers
• Material weight: 1kg ? 0.05kg total weight: 1.4kg Density: 1.31 g/cc Melting point: 210 degree c
• Tested extensively for smooth and frictionless feeding to ensure smooth 3D printing process and also ease of using
• Packaging : Vacuum sealed with desiccant to protect filament from humidity
• Most widely compatible and recommended PLA material for 3D printing premium quality 3D objects both for commercial purpose and personal use ranging from all kinds of prototypes across industries like Architecture prototypes, Automobile prototypes, Dental prototypes, many other customized 3D prototypes and also to make customized or personalized 3D miniatures.