Industrial & Scientific Store - Additive Manufacturing Products

• Ender 5 plus PEI Print Bed: A upgrade Replacement printing platform-JanusBPS 377x370mm/ 14.84X14.56inch. This steel plate is Double-Side Coated, one side with Gold Powder, another with a Smooth PEI pre sticked, comes with a sticker base. It gives you two different experience on one plate just by flipping it over.
• Flexible, removable with High strength and heat resistance, can stick very well. Compatible with Ender 5 Plus or diy your own 3d printer.
• The double sides coated sheet is very easy to use, simply stick the bottom sheet onto your heated bed, then place the steel platform on the top.Both sides can be used to print, convenient. The pei sheet is pre-sticked by machine, no worry about the bubbles, please peel off the profective film on the pei surface before using.
• Most filaments, such as pla petg abs tpu can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.
• The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.

• PLA+ Filament Bundle Multicolor PLA Plus 3D printer filament bundle multicolor, 8 colors in total: Black+White+Clear+Clear Blue+Clear Red+Clear Orange+Clear Yellow+Clear Purple. 8 rolls of multicolor PLA+ Filament, individually vacuum packed, 250g clear PLA+ filament bundle is convenient for customers who have multiple color needs.
• JAYO PLA+ 3D Filament 1.75mm PLA PLUS filament is 10 times stronger than normal PLA Filament. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the 3D printing result better.
• Neatly wound filament JAYO 3D printer filament is neatly lined up, which can avoid filament tangling during the printing process, reducing the risk of clogging and greatly increasing the printing success.
• 1.75mm Filament Diameter JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers.
• High Compatibility & Easy to Use Compatible with 99% FDM 3D printers and 3D pen on the market. JAYO PLA+ filament's excellent stability are friendly to both beginners and advanced users.
• Recommend Settings We recommend printing the PLA Plus filament at nozzle temperature of 205-215 degree C, bed temperature of 50-60 degree C, and printing speed of 50-100mm/s.

• Q7 3D-C FIL PLA+ F D1.75 B/GRY 1KG 2P(AMZ)

• Rail Guide Length: 700mm
• Block: MGN12H carriage
• Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
• There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out while assemble the rail to your machine, don't forget to take it down before running your machin

• Cured Hollowed Models Perfectly - Make sure your prints are perfectly cured both inside and outside to avoid cracks and preserve the models in their prime conditions.
• Convenient Parts Assembly - Use Phrozen Cure Beam to cure models that need to be assembled together, making them safe and long-lasting.
• Easy Storage - With its light and compact size, you can store the Phrozen Cure Beam pretty much anywhere. Keep it on the corner of your work desk or shove it in your drawer, and it won't take up much space.
• Intuitive Pen-Shaped Design - With an intuitive design, you can comfortably handle the UV pen just like any other pen. Extremely easy to maneuver and master.
• What's in the Box - Phrozen Cure Beam comes in a well-packaged box with safety glasses and two power adapter options for you to choose from. Phrozen also provides a professional support team to assist you along your 3D printing journey.

• 2-in-1 Multifunctional Design ELEGOO Mercury Plus 2.0 has dual functions of cleaning and curing, it supports one step to finish the model postprocess. Which makes the operating process more efficient with less effort to meet your needs. Compatible with most LCD/DLP/SLA 3D printers such as ELEGOO Mars series.
• Newest Upgraded Curing Mode Brand-new lamp board design with double row high-power 405nm lamp beads(8+8), and get rid of the influence of fan noise. With the 360?rotating curing turntable, which can makes full use of the light source and cure the models evenly and more thoroughly. Realize true all-round curing. The surface of the cured model is smoother.
• Flexible Cleaning Methods Mercury Plus 2.0 supports two methods of cleaning models. 1. Basket washing: Remove the model and put it in the basket for direct cleaning. 2. Suspension washing: Directly hang the printing platform on the cleaning rack for cleaning to reduce resin exposure. The height of the suspension bracket can be adjusted according to the liquid level in the bucket, makes the model cleaning more fully.
• Anti-UV Light Hood The cover of this wash cure machine can block up to 99.95% of ultraviolet rays with a wavelength of 405nm, it can effectively increase the curing and protect your vision. Equipped with touch-sensitive buttons and large LED screen to provide a high-quality experience.
• Safe Design The Mercury Plus 2.0 comes with 180x150x206mm sealed washing container, it supports larger size models for cleaning. When picking up the cover in the curing working state, it will suspend operation automatically. This machine adopts sealed cleaning, which effectively prevents the leakage and volatilization of the splashing liquid, and provides more safety.

• Stiff & Strong & Heat Resistant - Polymaker PolyMide PA6-CF nylon filament 1.75mm is made of 80% PA and 20% chopped carbon fibers. The carbon fiber reinforcement really provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion (Heat Deflection Temperature (ISO 75 0.45 MPa): 215 degree C)
• Wide Application - PolyMide PA6-CF is very strong, durable and features an excellent heat resistance. It can be used in applications requiring torsional, tensile, and impact strength such as bicycle pedals, brackets, jigs, ESD safe fixtures, drone frame, prosthetics or handles
• Tangle & Resealable Bag - Our PA6-CF nylon filament 1.75 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue
• Printing Setting - Nozzle: 280-300 degree C; Bed Temperature: 25-50 degree C (Do NOT exceed 50 degree C); Speed: 30mm/s 60mm/s; Annealing: 80 degree C 6h (To ensure a good heat resistance of your printed part it is recommended to anneal your print model); Bed Surface: almost any surface with a thin coat of PVA glue or Magigoo PA
• Note - It is important to have an abrasion resistant nozzle since there is carbon fiber inside this Nylon filament. PolyMide PA6-CF is a very stiff filament so it is required to have a good set up to ensure a good feeding (avoiding excessive bending in the filament guide system). It's ultra critical to have your filament enclosed in a dessicant box while printing, and keep your nozzles clean between every 8 prints or so.

• DRYER & STORAGE BOX: the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Also 2 slots at the corners were designed for placing dessicant,keep your filament in longer drying condition.Sealed protection, comprehensive dust-proof and damp, no impurities. US Plug, input voltage 110V-120V
• INFINITE ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR: based on infinite adjustable temperature mode, you can adjust specific heating temperature to accommodate needs of various filaments by simply turning the knob from 40-65 degree C, with main types of filaments marked for your fast use. Equipped with individual humidity sensor, measurement range from 10%-99% (NOTE: A76/LR44 button battery has ALREADY included), real-time data will be indicated by the LCD monitor, the dryer is designed to reduce humidity levels to 10%
• COMPATIBLE WITH MULTIPLE SPOOLS: works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PVA, PC, TPU, PETG, PA, Wood, ABS, Silk, etc. Exquisite space allows usage of single roll with spool size: 220x72mm, Inner size: 50mm, with little rubber seals to fit around a PTFE tube, and smooth rotating shaft allows the filament to continuously rotate in a dry hot box to remove moisture
• HOT-AIR CIRCULATION HEATING SYSTEM: applying hot air circulation heating which makes the temperesuture inside box more even, filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily
• 45W PTC HEATER & BUILT-IN FAN: different from applying ordinary heater 48W PI heating pad to heat up space, eibos easdry fialment dryer uses 45W PTC heater which is durable, energy-saver, and environmentally friendly, makes filament drying more evenly. Also a Built-in fan is designed to circulate the hot-air (the outside air is heated before being circulated ) inside the chamber to make drying system better remove the moisture

• Ultra-High Precision Detailing: Funcrecol 121 3D printer resin reveals the full detail of 3D prints with ultra-high precision, capturing fine design elements for professionals and hobbyists seeking top-quality results.
• Smooth Ceramic Surface: Infused with ceramic powder, Funcrecol 121 3D resin offers a smooth, ceramic-like finish that enhances both the look and feel of your 3D prints, ideal for sculptures and prototypes alike.
• Fast Printing Capabilities: Funcrecol 121 3D printing resin's exceptional fluidity meets the demands of high-speed printing, featuring a rapid curing process that streamlines production and accelerates project completion, ideal for rapid prototyping and efficient short-run manufacturing.
• Robust and Less Brittle: Funcrecol 121 photopolymer resin delivers confidence in printing with its strength and enhanced durability. Formulated to minimize brittleness, it maintains print integrity for a wide range of applications.
• Versatile for Various Uses: Funcrecol 121 Resin excels across industries, from tabletop miniatures to detailed anime models, offering designers, engineers, and artists a reliable solution for diverse 3D printing projects with precision and high-quality results

• Keep Filament Dry during 3D printing Wet 3D printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. The QIDI TECH filament dryer box helps to dry excess moisture, improve your 3D model, and make the filaments say goodbye to the troubles of drawing, clogging, and poor adhesion.
• Comprehensive Dust-proof & Moisture-proof This filament dry box's lid is easy to remove and install while providing a secure and airtight seal, which can block the air circulation inside and outside the consumable box as much as possible, which increase the life of filaments. It can improve the printing model stability of water-absorbent filaments, and prevent model printing from drawing wire.
• Space Saving Qidi dry box can be easily installed on the existing spool holder on top of the printer unit, which can keep the filament dry while printing, and greatly save space for you.
• No Preheating & Power Supply This is a great option for independent filament drying without the need for preheat printing. And you do not need any electricity and power supply to keep the drying of the 3D printer filament.
• Reusable Drying Pack The inside of the dryer box is matched with a desiccant to ensure that there will be no changes in air and humidity within 30 days. And it can be reused. You can bake it in the oven at low temperature for 2-5 hours, and then you can continue to use it.
• High Compatibility Support the maximum capacity: ?210*85.5(H)mm. Compatible with 99% of the mainstream 3D filament brands and 1.75mm filament diameters; Works perfectly with PLA?PLA+?PETG?TPU?ABS etc, Including high-end filament PA?PC.

• High Toughness & Low Shrinkage
• Ultra-High Temp Resistance
• Wide Applications

• 6PCS per package. Each Size 20mm*20mm*1000mm.
• Made of premium 6063-T5 material with smooth edges, they are rust-proof and durable
• High-Strength European Standard Aluminum Extrusion Profile, The Surface Is Anodized, Making The Surface Smoother And Cleaner.
• Aluminum profile extrusion products are a good linear motion material with high strength and adjustable. Standard 6mm T slot, they can be fixed on the side of 4 grooves such as M3, M4, M5 T-slot nut and pulley.
• Wide Application: Use For Automation Equipment, Professional 3D Printers, Shelves, Lasers, Workbenches, Furniture, Precision Printers, Machinery, Fitness Equipment, Automatic Cutting Machines And More.

• Fiber glass is a composite and semi-flexible material made by curing fiberglass and epoxy under high pressure, strong and durable, high temperature resistance(266?/130 degree C), suitable for use in RC model, 3d printer build surface plate.
• Fiberglass board also has moisture resistant, acid resistant, aging resistant, impact resistant, long service life.
• It requires a heated bed, performs well in high temperature. Perfect for sticky filaments like Nylon/PETG/ABS/PLA/TPU/PEEK/PEKK/ULTEM/CF/VAAPR
• Easy print removal, this G10 3D printer build plate is sticky when heated but pops off your prints easily. Based on usage experience, wet sanded the surface of fiberglass board lightly(2000 grit) can increase adhesion.
• Fiberglass board is also an excellent industrial material that can be cutted into various parts

• This PLA is made in-house by Prusa Research. We chose Natureworks 4043D resin which is the best and most widely used in 3D printing.
• This filament is manufactured with precision of +- 0.02 mm
• Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.

• PLA MAX Filaments are made of high-quality materials and special technique.
• It is a new 3D Printing materials to replace PLA PRO(PLUS).
• Have higher strength and better toughness?excellent thermal stability.
• This is our new products. Now sold on Amazon in black, white, yellow,orange, red, green, blue,purple, gray, and there will be more colors in the future. We can also customize the color according to the customer's requirements.
• Industrial & Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament

• 1 KG (approximately 2.20 lbs) Spool
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant
• Recommended Extrusion/Nozzle Temperature 210 degree C - 240 degree C (410?F - 464?F), Use With Heated Build Platform Is Recommended
• Spool Diameter: 8\" - Spool Width: 2.50\" - Spool Hub Hole Diameter: 1.25\"