Water Treatments - Water Level Controller

• Single Phase Fully Automatic Water Level Controller Panel
• Electrolysis Free
• With Inbuilt 150/200+36+36 Capacitor
• Up to 20 Amp overload and Dry Run Setable
• Digital Volt & AMP Meter

• Motor Wattage: 20A@230V
• Anti corrosion stainless sensor
• Garrenty: 6 Months
• Sensor with Cable 1 Meter
• Start, stop, auto, manual switch
• Tank water level indication, pump on indication
• Auto & Manual Mode

• Fully automatic water level controller single phase
• Anti corrosion stainless sensor
• Contact capacity : 15 A
• auto, manual switch
• Tank water level indication, pump on indication

• Warranty :18 MONTH Manufacturer. Warranty Service : Repair or Replacement.
• THIS MODEL IS SUITABLE TO ANY 3 PHASE STARTER PANEL
• FULLY AUTOMATIC AUTO OFF WHEN TANK IS FULL OR SUMP IS EMPTY
• Suitable to any HP Motor as no load comes on our controller. Load passes to existing starter.
• Auto and Manual mode switch available, Sensor fault detection provided, if sensor got failed LED start blinking

• SAVE WATER,TIME,MONEY
• fully auto FOR DUAL AND SINGLE TANK
• installation methods
• 1ST-INSTALLATION GUIDE IN PAKING BOX
• 2ND-INSTALLATION VEDIO ON YOU TUBE
• 3RD-YOU CAN CALL OR WATSUP OUR ELECTRICIAN

• FEATURES High reliabilityand Low maintenance
• Operational period. Low AC Voltage sensing
• It is Grey in colour

• Visible Attractive LEDs for showing the tank level.
• Has an Audible buzzer alarm. Mute button is provided for stopping the buzzer sound. Very compact and portable design.
• A DIY product. Does not need any expertise person to fix it.
• Supports both contact type and magnetic float sensors. Microcontroller based intelligent circuit.
• Long lasting and User Friendly. 12 months warranty.

• Supports Single Phase AC230V. Suitable for Sump to Tank set up (Underground tank or ground level tank to Overhead tank set up).
• Checks the low level of water in sump
• Has Power ON, Motor ON LED and SUMP LOW LED indications.
• Has MANUAL mode and AUTO mode functions. In AUTO mode, AUTO ON and AUTO OFF operation occurs. In MANUAL mode, the motor pump will be constantly running. By changing to AUTO mode, automatic operations occur.
• Suitable for motor pump operated by normal ON/OFF Switch or MCB.

• SS pin molded within Plastic
• with 1 meter wire
• No electrical contact with water.
• 1/2 inch Thread for direct pipe mounting
• Note : Do not use with AC supply, Use 5-24V DC supply only

• The trendy carafe comes with a lid which has just the right design to help you pour out your coffee without any spillage.
• This carafe comes with a nylon filter which filters your coffee to perfection.
• The coffee maker comes with a water gauge indicator which helps you to fill in just the right amount of water for a tasty brew.
• The drip stop allows you to pour a cup of coffee before the full brewing cycle is finished.
• Fill the water tank easily and precisely with the water level indication.
• Ease of cleaning and maintenance with dishwasher-safe jug & filter holder, comes with 1-year warranty.

• Normally Open Type (Yellow Wire) and Normally Close Type (Blue Wire)
• Corrosion Free Material
• Advance Magnetic Technology
• Cable Lenght : 2 meter
• Max Switch Current : 5A (DC), Max Switch Watt : 10W / VA, Ideal Operating Ratings : Voltage: 2 to 12V DC Current: 5 to 50mA DC

• Voltage: 250Vac Current: 15A Shape: Squarez
• Design Temperature: 80?C
• Contacts: No+Nc
• Cfls With 2 Meter Cable Length
• Buy with confidence ?for your best choices,the most comfortable goods ever have.If you have any questions, please contact us in time and we will help you solve them

• Automatic Submersible Starter With Water Level Controller With inbuilt Running(36.mfd) Capacitor.
• Suitable for 0.5 To 0.75 HP/ Inbuilt Water-level Controller for Overhead and Underground Tank. / Auto & Manual Slide Switch Options.
• Low Voltage (130V), High Voltage (270V) & Overload Protection. [with Ampere Adjustable Knob]
• Tank Status (Empty / Filling) Indication's by LED's Provided on Controller./ High Voltage, Low Voltage and Overload State of Motor Indicated by LED's Provided on Controller.
• Why & What Is Run Capacitor? :- The Run Capacitor Is Inbuilt Provided In The Device. The Run Capacitor Provides Support To The Motor During Its Running Or Operational time And This Run Capacitor Is of 36.mfd, Therefore, It Can Operate on upto 0.5 To 0.75 Hp. Motor

• MADE IN GERMANY : Normally open type high quality with advanced magnetic, reed switch technology float sensor with approx. 3 Meter wire length.
• ROHS, IP67 and REACH COMPLIANT : High quality polypropylene housing (Corrosion free). Lead free and comply with RoHS directive.
• NO SEPARATE ELECTRIC / POWER SOURCE REQUIRED : The sensor does not require any electric source and it works on the principle of Reed Switch and Magnet which help switching ON and OFF when the float moves up and Down.
• MECHANICAL SWITCH : It acts as a mechanical switch which is installed on top of a liquid surface and as the liquid level goes up and down it performs switching ON AND OFF.
• CAUTION : The sensor may get damaged if connected to electric current or higher load than specified.
• TECHNICAL SPECIFICATIONS : Switching Voltage Maximum = 200 VDC, Switching Voltage Maximum = 140 VAC, Carry Current Maximum = 500 mA (Ideal recommended 5 to 50 mA), Contact rating maximum = 10 W / VAC, Operating Temperature +10 to +50 Degree Celsius.
• SUITABILITY AND MOUNTING RECOMMENDATION: All types of Water Level Controllers, For Screw and Hanging Mount please refer to Images.

• Protection from pump dry run
• Advanced micro controller based design
• Low Power Consumption
• High & Low voltage cut off
• Specialy designed for Indian climate
• Reliable brand Videon since 1985
• 1 year Warranty
• Spare parts availabilty post warranty

• Magnetic float type sensors are maintenance free.
• Long wire length makes sensors suitable for tanks with height upto 3.5 meters
• Different color sensor wires for different levels to avoid any kind of confusion
• These magnetic float sensors are made using high grade stainless steel pipe and Abs float for maintenance free operation
• Four magnetic sensors are required in case five conduction sensors are used.