Water Treatments - Water Level Controller

• Current Capacity - 3 Amp.
• Sensor Voltage - 12V DC (isolated)
• Dimension - L 60 X W 40 X H 87 mm
• Gross Weight - 0.250 kg. (approx.)

• Fully Automatic Controller, Micro Controller Based Design, Power Failure protection. (Not Start Motor Every Time on Power Failure. )
• When the water level in the tank becomes low, means water get down from middle sensor, motor get switch on automatically. The tank starts filling up. When the water level reaches to the higher level, the top level sensor sense. the motor automatically gets switched off
• Package Contain : 1 Water Level Controller Unit. 3 no S.S Sensors. 1 user manual with technical details
• Suitable to 0.1 HP to 2.0 HP Motor
• Auto and manual switch available

• Floaty Water Level Controller WLC Square Head Float Switch Wired Sensor Security System Wired Sensor Security System
• Rated voltage: 250V & Rated current: 8A/Contacts: NO+NC & Weight
• Cable: 5 Meter (i.e. customize wire lenght is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices & Use: Water Level, liquid level Controller etc,
• INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure
• MADE IN INDIA PRODUCT

• Control both tank underground tank to overhead tank fully automatically
• Work With Any Single Phase Motor For Home ,Office ,Hospital,Restaurant
• Auto-Switch: -Automatic switch for water level control. This controller will sense the water level in the tank and will turn on and off the water supply automatically.
• It requires no manpower to operate as it switches on the motor when tank level is low and automatically switcher it off when the tank full. It is very useful product for your daily life as it save your time water and electricity.
• Longer Life No Mechanical System /. Avoid Overflow
• Fully Automatic Controller, Micro Controller Based Design, Power Failure protection. (Not Start Motor Every Time on Power Failure. )
• No Men Power Required To Operate As Fully Automatic with 2HP capacity

• VENEX 3 Phase Water Level Controller with DOL Digital Starter Suitable for Motor up to 10 HP with HV LV OL Dry Protection with spp
• fully automatic
• Warranty : 12 month Manufacturer. Warranty Service : Repair or Replacement. Package Contain : 1 Digital Starter with water level controller 6 S.S sensors 1 user manual
• This model is the combination of a digital water level controller and motor control panel (motor starter).
• with auto manual switch for bypass water level controller

• Tank Control - Double Tank/Overhead & Underground both.
• Motor Control - Single Phase/Monoblock Pump Motor operated by a normal on/off switch / MCB/ Electronic Starter.
• Load Capacity - 25 Amp & Upto 3 Hp Motor.
• Sensor - Corrosion Free, Stainless Steel-No current/Voltage is passed through Water, therefore No Electrolysis Salt Deposition in the sensor.
• HOUSING MATERIALS - Compact Steel with powder coated housing.

• Easy to install in any tank just hang down and connect with on/off switch to cable, when tank full it go up (switch off) and when tank empty it's down (switch On).
• Long life & Rust proof (entire sensor body in polypropylene) High Quality Float switch with 3 mtr Cable.
• Contacts: NO+NC and Common
• Wier 3 Meter Rated voltage: 250V
• Electrical endurance: 500,000 times

• Indiacate level of tank
• Save Electricity
• Brust Free SS Sensor

• Includes a carrying case with belt clip.

• Made from ABS plastic body,high grade PCB, for durability and performance.
• Overhead tank will have three sensors and ground level tank will have three sensors.
• Specially designed sensors that are plastic molded, corrosion resistant, non-conductive, low power, maintenance-free and safe for sensing levels in the tanks.
• System has three position power control toggle switch with \"auto\" mode, \"off\" mode and \"manual\" mode.
• Provide LED indication for Motor ON and OFF, water LOW and NORMAL.

• Single Phase Fully Automatic Water Level Controller For Municipality Water
• Anti Corrosion Stainless Steel Sensor
• Just Get This Product And Get Free From Headache Of Check And Start Motor At the Time Of Municipality Water Timing, As It Will Start The Motor Automatic By Detecting Municipality Water At Inlet Of The Motor
• Support Up to 3 H.P. Motor
• With Manual ON-Auto OFF, Fully automatic For Municipality Water

• TIMER CONTROL & MANUAL ON/OFF : Water Overflow Controller with Timer with Manual ON and Auto Off : 1 Year Warranty.
• MULTIPLE TIMER OPTIONS : Peace of Mind with Timer Control which switches OFF Pump/Motor after pre-set time or Tank Full whichever is earlier (Options of 7.5, 15, 30, 60 Minutes to Switch OFF the Motor Automatically).
• HIGH QUALITY COMPONENTS : High Quality PCB, Circuit and Components, Stabilized Controlled Device (Consistent Performance of Device even in Electricity Fluctuations).
• KEY FEATURES : Tank Full Indication, Pump/Motor ON Indication, Power ON Indication, Push Button Switch to start the Pump/Motor (Suitable for Single Phase Motor).
• HEAVY DUTY : Powder Coated long lasting Metal Body, Quality Terminals to withstand heavy electrical load. Controller Suitable for Single Phase Pump/Motor upto 2HP.

• Automatically Switched OFF the motor as soon as the tank is filled with the water. It eliminates manual efforts and provides a flawless automatic operation.
• Automatically Switched OFF the motor as soon as the tank is filled with the water. It eliminates manual efforts and provides a flawless automatic operation.
• Solves the water tank overflow problem by switching off the motor at the correct time. This will save a great amount of water and minimize wastage and provides a peace of mind.
• Automatically Switched ON the motor when the water level decreased to a certain level, this will ensure smooth and un-interrupted water supply throughout.
• Save Water Save Electricity Save Time.
• Suitable for 3 phase water pump (starter)

• Endurance: 500,000 times & High quality of wire and Plastic Body Electrical
• Cheryy float switch for Water tank, Water Cooler, hard water or fuel such as diesel, kerosene, oil and other heavy water storage container for on/off switch.
• It's Corrosion Free, ISI cable, Sturdy and durable & need no maintenance, No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
• Easy to install in any tank just hang down and connect with on/off switch to cable, when tank full it go up (switch off) and when tank empty it's down (switch On).
• Long life (approximate 10 million operations) & Rust proof (entire sensor body in polypropylene) High Quality Float switch with 3mtr ISI Cable. you can add extra cable as per need's.

• One Year Warranty, High Grade Magnetic Float sensors, Motors up to 2Hp, Fully Automatic, Made in India, Easy Installation, Silent Operation, Auto & Manual Mode, Durable, Compact, Shock Proof Plastic Enclosure
• Fully Automatic Operation: Turns the motor ON when water level falls below 25% and turns it OFF when the tank is full.
• Package contents: Magnetic Float Sensors , Main water level controller panel, Instruction manual, Screws & Wire ties
• Suitable for single phase MCB Type Motor Starters and Submersible Pumps
• Easy Installation: Installation manuals in Hindi and English make installation very simple

• Fully automatic water level controller single phase
• Automatic as well as Manual mode of operation & Pump on indication
• Anti corrosion magnetic float sensor
• Current capacity : 15 A
• 6 Month of Warranty