Water Treatments - Water Level Controller

• Fully automatic water level Controller. (If using it with submersible panel, than panel only with run capacitor will compatible with this device)
• Compatible with Mono-block Motor and Submersible Panel.
• Suitable for 0.5 to 3.0 HP For Mono-Block Motor / For Submersible Motor it Depends on your Submersible Panel's Start & Run Capacitors. (Contact Us for More Details)
• Overhead and Underground Tank Controllable?(With Automatically Start Features)

• Three Nos. Of Sensors
• Anti Corrosion Carbon Sensor
• Compatible With All Water Level Controllers Models
• 1.5 Meter Wire Attached
• Easy To Fit And Use
• Shock Proof
• Long Life
• No Contamination
• With Wire Length Of 1.5m These Sensor Are Suitable For Tanks Up to 2000L

• No Men Power Required To Operate As Fully Automatic with 2HP capacity
• Fully Automatic Controller, Micro Controller Based Design, Power Failure protection. (Not Start Motor Every Time on Power Failure. )
• Auto/Manual Mode & With Float Switch Sensor
• Package Contains : 1 Main Unit, 1 Flot Sensor & User Manual Full Kit
• 1 Year Warranty For Device & Flot Sensor

• Rated voltage: 250V and Rated current: 8A/Contacts: NO+NC
• High Quality Cable (customized wire length is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller
• Endurance: =500,000 times of wire and Plastic Body Electrical
• INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure

• Automatically switches ON and OFF the motor pump depends on the water in the tank
• Embedded technology gives long life, less power consumption protection to pump
• Semi auto and Fully auto functions along with Manual Start and manual stop switches
• LED indicators are provided for power,tank full and motor on
• 3 stainless steel sensors 1.5 meters each

• Compatible with most of water level indicators and controllers.
• Completely insulated wire joints.
• Cable Length: 1 Meters.
• Physical Damage Not Included.
• Purification Method: Gravity

• Controls both Submersible Pump and Openwell Pump
• Dryrun Protection system Facility For Both Openwell and Submersible pump.
• Compatible with 1 Phase and 3 Phase Pumps
• Corrosion free magnetic float sensors
• 1 year full replacement guarantee

• Cable Length : 2 Meter Corrosion Free Material
• Can be Used With Tank Pools , Hydroponics, Salt water Tank, Fresh water tank, Gardening, aquariums for power head control, Pet bowls, fish tanks, filtration, RO , Water Coolers, Water Filters ,Dosing pumps Water Level Controllers etc.
• Caution : Your Project Should Not Have Mercury in It
• Ideal Operating Ratings : Voltage: 2 to 12V DC Current: 5 to 50mA DC, Max Switch Current : 500 mA (DC), Max Switch Watt : 10W
• Advance Magnetic Technology

• Five Nos. Of Sensors
• No Corrosion Sensor
• Compatible With All Water Level Controllers Models
• 1.5 Meter Wire Attached
• Easy To Fit And Use
• Long Length Of Wire Of 1.5meter Is Suitable For Tanks Upto 2000 Litres

• For Overhead Tank Only
• 15A Load Capacity
• Auto/Manual Switch
• Two Level Indication LED's

• Endurance: 500,000 times & High quality of wire and Plastic Body Electrical
• Cheryy float switch for Water tank, Water Cooler, hard water or fuel such as diesel, kerosene, oil and other heavy water storage container for on/off switch.
• It's Corrosion Free, ISI cable, Sturdy and durable & need no maintenance, No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
• Easy to install in any tank just hang down and connect with on/off switch to cable, when tank full it go up (switch off) and when tank empty it's down (switch On).
• Long life (approximate 10 million operations) & Rust proof (entire sensor body in polypropylene) High Quality Float switch with 3mtr ISI Cable. you can add extra cable as per need's.

• Operation Type:- Fully Automatic Tank Type:- Dual Tank
• Mounting Type:- Panel Usage/Application:- Water Level Controller Voltage:-230 V AC
• Size:- 24 CMx 24 CM x8.5 CM
• Capacity:- 2 Hp Current:- Max 22 Amp

• Single Phase Fully Automatic Water Level Controller
• Anti Corrosion Stainless Steel Sensor
• Contact capacity : 30 A
• Up to 3 H.P. Supported
• Even it can be used for Single tank

• High Quality 316 Grade SS Water Level Sensors
• Ideal for Water Level Indicators and Controllers
• No Corrosion

• Best for domestic as well as for industrial/commercial application
• One year of manufacturer warranty
• Fully customer support 24x7
• Easy to installed, no much technical knowledge is needed
• 100% saving on water, electric bill wastage and time saving
• Made in India and made according to Indian usability
• High durable floating magnet sensors, maintenance free
• More then 10 years of life

• Warranty : 1 Year Manufacturer. Warranty Service : Repair or Replacement. Package Contain : 1 Water Level Controller Unit. 6 SS Sensors. 1 user manual with technical details.
• High quality M.S. Enclosure. Microcontroller based water level controller, all signal will pass in sensor through AC filter circuit that provides filter signal to sensor, that improve life of sensor, A.C signal passes on sensor side so never get rusting problem.
• This model automatically switch ON and switch OFF Motor. When water level of overhead tank becomes low means water get down from middle sensor and water is present in the underground tank or sump, motor get start automatically. The tank starts filling up. when the water level reaches to the higher level, the motor automatically gets switched off. AUTO OFF WHEN TANK IS FULL OR SUMP IS EMPTY.
• This model have dry run protection so it only start motor if water present in underground tank or sump. Suitable for 0.1 HP to 5.0 HP Motor, Protect motor from dry running. Motor ON OFF LED indication provided. Water Level indication provided for both tank. Supply voltage : 220-270 V AC, Sensing element : 304 S.S Sensor it is free from oxidation, long life. Any conducting wire can be use for sensor.
• Auto and Manual mode switch available. In auto mode motor start and stop automatically. In manual mode user can start and stop motor by pressing start and stop button of controller. No additional wiring require to operate motor manually. Also Suitable for MCB Starter panel and submersible motor, see diagram above for connection. High quality M.S. enclosure provided. Fully automatic, controls from underground tank to overhead tank so no man power required. Long service Life.