Electricals Store - Electric Motors

• 70cfm, 1.4 amps, 3000 RPM, 60Hz, 1.1 Amps @ 120V, CCW CL B
• replaces Broan 655, 657, 658, 679, 671, 671a and N678 Nautilus N655, N679 and N671 bath fans
• C-Frame motor, Shaft 7/32\" x 1 1/4\" with splines; Wire length: 6 1/2 inch with 2-prong plug; Plastic fan blade: 5.27 inch in diameter
• 7/8\" stack; 2 mounting studs on back.
• Superior Quality you can Trust! This SupplyEdge product is UL/CSA approved to assure safe operation and long life. Warranty- This part sold by SupplyEdge come with a 1 year, no questions asked, no hassle warranty.

• Auto Start Timer: Once the unit is connected to electricity, you can set a delay time as per your choice for the starter to turn on. For example, if you set the Auto Start Timer to 1 hour and turn on the Auto Switch, the starter will switch on automatically after 1 hour once the power comes online.
• On/Off Cycle Timer: You can program your starter to start or stop for a set duration. For example, if you want to run the motor for 2 hours and then stop for a 1-hour gap, you can simply set the timing and turn the auto switch on, and the starter will repeat the cycle automatically until you manually switch off the starter.
• Dry Run Protection: Safeguard your motor against damage caused by low water levels with built-in Dry Run Protection. Detecting overheating or overload situations, the starter swiftly intervenes by shutting down the motor, preventing potential harm. Additionally, customize delay times for motor refilling, ensuring continued operational efficiency.
• High & Low Voltage Protection: This feature can be programmed as per the varying field conditions. For example, if your motor runs on 12-13 amps, you can adjust the relay setting accordingly so that in case of any power surge or under-load, the unit automatically switches off the starter, preventing any damage to the motor.
• Phase Unbalance Protection: In many cases, there is unbalance in the flow of current, due to which the motor receives variation in all 3 phases, causing reduced output of water and low efficiency. Our unit ensures that uniform current is supplied to the starter and motor in all 3 phases, increasing the life and performance of the starter and motor.

• Model Name: Mach3 USB Motion Card; 4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives.
• This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify (Notice: Doesn't support Win8/win10/macOS system !!!) .
• Signal Output:0-10V, it can control the spindle motor speed through using mach3 software.
• If you are not familiar with the product and software features, make sure the machine's power switch on hand, you can quickly turn off the power.
• Recommends that users install the emergency stop button and make sure the button is functioning properly.

• Switch Actuation Style: Push button. Support forward and reverse control. Can be installed on a car with a spare winch.
• The winch controller is compatible with most 12V winches. Rated capacity is 1500lb/2000lb/3500lb/4000lb/5000lb.It can be used to replace old and damaged ones.
• The winch controller is supplied with 4 cables . Specifically to solve any special hazardous situations encountered by the car when travelling outdoors.
• The winch control handle is made of high quality ABS material. High quality electric cable rope with strong resistance to pressure and toughness.
• Designed to match rigorous quality standards. High temperature and melting resistant, longer lifetime. High quality at a budget-friendly price

• 1. Rating: 2P 2Normal Open Contactor, DC 12V, DC24V, 25A; 50/60Hz.
• 2. Ue: 250V, Ui: 500V
• 3. Mounting Type: 35mm DIN Rail Mount.
• 4. Long life: Electrical life greater than 100,000 times. Mechanical life is more than 12,000,000 times.
• 5. Visualization window: The instruction window can indicate the on-off state of the contactor, make product action clear at a glance. Transparent flip cover design New transparent flip cover design for easy customer identification.

• 80mm cnc mount

• Nema 23 stepper motor, 1.3Nm holding torque
• Stepping motor with 1.8 degree, 4-wire, 2 phase, 6.35mm shaft diameter
• Bipolar stepper motor 57*57*76mm, weight 1kg
• Stage stepper motor 2.8A rated current, resistance 1.0Ohms
• Industrial stepper motor for cutting machine, marking machine cnc router motor

• ALUMINUM ALLOY: The motor bracket is made of excellent aluminum alloy material, lightweight, wear and resistant, and has a long service life.
• APPLICABLE MOTOR: The mounting bracket is suitable for NEMA34 type stepper motor, with simple structure, easy installation and strong compatibility.
• STANDARD SIZE: The bracket has standard mounting holes to ensure accurate installation with the stepper motor, with stable and reliable structure.
• GOOD PERFORMANCE: Stepper motor bracket, with a thickness of 8mm, which has high strength, good toughness, not easy to deform, with good stability.
• GLOSSY SURFACE: With fine workmanship, this stepper motor bracket has a glossy appearance and will not damage the motor parts after installation.

• 100% Size inspection ensures proper installation
• Chrome steel is manufactured to be strong and durable
• Effectively reduce noise and vibration.
• Reduce parts cost and replacement frequency
• XIKE bearings are your simple and efficient choice

• 25-403-29-S Voltage Regulator Rectifier Replaces for Kohler Voltage Regulator Rectifier, part number: 25 403 39-S, 25 403 32-S, 25 403 29-S, 25 403 21-S, 25 403 20-S, 25 403 08-S, 25 403 05-S.
• Fits for Kohler engines, compatible model: CH11, CH13, CH14, CH15, CH18, CH20, CH22, CH23, CH25, CH26, CH620, CH640, CH680, CH730, CH735, CH740, CH742, CH750, CH752, CH940, CH980, CH1000, CV640, CV680, CV730, CV740, CV742, CV750, ECH630, ECH650, ECH730, ECH740, ECH749, ECH940, ECH980, ECV650, ECV680, ECV730, ECV740, ECV749, ECV850, ECV860, ECV870, ECV880, ECV940, ECV980, ELH775, EZT725, EZT740, EZT750, FCV740, KT735, KT740, KT745, PCH680, PCH740, PCV680, PCV860, SV730, SV735, SV740, ZT710, ZT720, ZT740, LH630, LH640, LH685, LH690, LH775, 62570, 64569, 74255, etc.
• Package includes 1 Voltage Regulator Rectifier kit as picture. Please check the model number to make sure it will fit your equipment.
• Easy to install, with high quality.
• If you have any question, please contact us. We will reply immediately.

• Stable PerformanceThe DC motor drive is super smooth, almost no noise, use high speed 3500/7000rpm for your choice, with large .
• FeaturesThe high-speed DC motor adopts ball bearings, which has the characteristics of low friction, firm oil seal, high bearing capacity, high efficiency, large and low heat generation.
• ReversibleThe stator winding of the motor is copper wire, which has low heat generation, small loss, and long life. It can be controlled by a switch (not including a switch) to achieve forward and reverse rotation, and CW/CCW control.
• Wide UseThe permanent magnet motor is easy to use and has a long service life. It can be used in cotton candy machine, small cutting table, grinding machine, and other mechanical equipment.
• Product ParametersWorking voltage: DC 12V/DC 24V (optional), rated power: 30W, no-load current: 0.5A, rated speed: 3500RPM (12V), 7000 RPM (24V).

• 100% brand new and high quality.
• Made of high quality material, durable and long service life
• Small body and it has stable performance.
• It has CW, CCW, stop function and it is easy to install
• Widely used in industrial DC motor speed regulation, DC fan, etc.

• 4pole electric change over switch (knife type)
• Current Rating :- 415volt , 100amp , change over box.
• Designed For :- Home, Schools,Factories etc.
• Body:- Metal
• Made in India