Electricals Store - Electric Motors

• ALL-METAL GEARS: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.
• PURE COPPER WIRE CORE ROTOR: With precision winding technology, the geared motor power instant increased by 30%.
• D SHAPED OUTPUT SHAFT: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.
• POSITIVE-NEGATIVE ROTATION: You also can adjust the speed, but the motor speed can only be reduced, can not be raised. Low noise and high torque, such as 10rpm can drive 15 kilograms.
• RELIABLE GURANTEE: Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!

• Country of Manufacture: CHINA; Material: Carbon,Metal
• Net Weight: 157g; Package Content: 20 Pairs x Motor Carbon Brush
• Main Color: Dark Gray,Silver Tone; Total Length(Approximately): 43mm/1.69\"(L)
• Battery Included: No
• Carbon Brush Size (Approx.): 17 x 6 x 6mm/0.67\" x 0.23\" x 0.23\"(L*W*T)

• MATERIAL - stainless steel.
• SIZE - connect to motor shaft: 5mm; connect to flex shaft: 4.76mm; length: 30mm.
• FEATURE - this stainless steel flex coupler(with grub screw) is for round end cable,fit for 5mm motor shaft and 4.76mm flex shaft.
• APPLICATION - for DIY;Direction: Opposite
• PACKAGE CONTENT - 1 x coupler.

• QUALITY UPGRADED - Galvanized surface treatment, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body. With precision winding technology, the geared motor power instant increased by 30%.
• Specification: No-load Speed: 285RPM at 24 Volts; kg.cm: 0.7 Power: 7.2W; No-load Current: 0.1A; Load Current: 0.3A; Reduction rate: 1: 17.4; D Shaft Size: 0.23 x 0.57 inches (D*L); Gearbox Size: 1.46x 0.91 inches (D*L); Motor Size: 1.39 x 1.30 inches (D*L); Mounting Hole Size: M3 (not included).
• GREAT LITTLE MOTOR - Small size dc gear motor with low noise and high torque, give your DIY projects a new of life! This motor is solidly constructed and ready to install in numerous applications.
• SPEED ADJUSTABLE - The speed can be adjusted by dc motor speed controller, but if you need a lower or higher speed motor, pls choose the right rpm meets your needs. This motor is reversible so that you can switch positive and negative.
• WHAT YOU GET - A pretty small little motor, has gear reduction box and motor in one small but very well built package.

• Made of high quality materials, sturdy, and long service life.
• Simple designed, easy to install and operate, convenient to use.
• The motor base suitable for 1/8 conversion brushless motor.
• Professional manufacturing, stable characteristics and high reliability.
• Fine workmanship, suitable for 1/8 oil drive car general.

• Product Name : Motor Carbon Brush;Fitness : Generic Electric Motor
• Carbon Brush Size (Approx) : 14x 8x 7mm(L W T)
• Total Length(Approx) : 3.2cm/ 1.3?
• Weight : 33g
• Package Content : 20 x Motor Carbon Brush

• Specifications : Rated power: 30W; Rated voltage(Optional): 12V/24 V; Rated speed: 3500RPM(12V),7000 RPM(24V); Current: 0.5 A
• Sturdy Material : The stator windings of the motor are copper wire which is low heat, low loss, long life with cw/ccw by switch control (switch not included);so that the motor torque is increased
• Applications : lawn mower, grinding machine, cutting machine, electric drill, cotton candy machine, small generators, winding machine, wire cutting bag machine, twisting machine, polishing machine, small radiator, blower, mixer, egg beater'small water pump
• Unique design : The double ball bearing design makes the bearing axial bearing capacity larger, the friction force becomes smaller, and the ball bearing has strong oil sealing
• High-quality materials : It drives smoothly, almost no noise, safe to use.High work efficiency and small dynamic loss

• LONG SERVICE LIFE: Made of high quality material, durable and long service life.
• SMALL VOLUME AND BIG TORSION: 31mm high quality copper tube motor, small volume and big torsion
• RESISTANCE OF SHAFT: Ball bearing design enhances the wear resistance of shaft
• IMPACT RESISTANT: All metal gears are impact resistant, long life and low noise
• WIDESPREAD USE: Generally used in curtain machines, advertising equipment, window openers and smart devices

• ALL-METAL GEARS?High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.
• PURE COPPER WIRE CORE ROTOR?With precision winding technology, the geared motor power instant increased by 30%.
• D SHAPED OUTPUT SHAFT?Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.
• POSITIVE-NEGATIVE ROTATION?You also can adjust the speed, but the motor speed can only be reduced, can not be raised. Low noise and high torque, such as 10rpm can drive 15 kilograms.
• Greartisan Gurantee?We only offer high quality motors! Any quality issues, please feel free to contact our customer service!

• 1Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire.
• 2Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on.
• 3Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current.
• 4The largest 32 divisions of the 6 models are optional; Suitable for 4 wires, 6 wires and 8 wires stepper motor.
• 5Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion.

• Motor mounting bracket is mainly used for motor, which mainly plays a fixing role. Mounting bracket is a good accessory for stepper motor and is widely used
• Motor mounting bracket, is in size of : 188mm x 101mm/7.4-inch x 4-inch(L*W)total size, 6.6mm/0.26-inch motor mounting hole dia, 70mm/2.76-inch motor mounting hole center distance, 6.4mm x 69.5mm/0.25-inch x 2.74-inch bracket mounting hole size, 70mm/2.76-inch bracket mounting hole center distance, 73mm/2.87-inch shaft hole dia
• Easy to install and operate, is a good replacement; Small size and lightweight; Steel material, durable and long service life
• Steps of installation: 1. Select motor mounting bracket of appropriate size; 2. Remove the motor mounting bracket to be replaced; 3. Installation
• Please select the appropriate size of the motor mounting bracket, especially the mounting hole diameter and mounting hole center distance

• Mainly Function: This carbon brush also called electric brush, which is widely used in many electrical equipment as a sliding contact element. The carbon brush widely used in daily life,It is very delicate and small, like a work of art
• Mainly Operation Instructions?This motor carbon brush should be regularly maintained or replaced, and clean up the carbon deposit.The carbon motor brushes are one of the most commonly replaced power tool components
• Mainly Parameters?This electric brush is applicable for 12V/24V car electronic fan motor.The brush has low noise and spark during operation. Model:JB/T4003-2001. Standard: 6x6x12.5mm.This electric brush could improve your work efficiency
• Good Wear Resistance: This graphite brush equip with high quality material and good wear resistance.Worn brushes are often the cause of a poorly running motor. Replacing brushes can fix an intermittent motor and restore a motor's electric braking
• Wide Range Of Applications: The motor carbon use widely for various of power tools and electric motors, such as circular car,saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed whacker, chop saw, blower motor, cut-off saw ,etc

• 802360JA Motor used in V8043 / V8044 Zone Valve Control
• Replacement - 802360ja/u motor, md10 motor, 30-117-A motor
• High-Quality Metal - stainless steel, high-temperature and corrosion-resistant; stable and extra-quiet operation
• Specifications - Speed:5/6RPM, Frequency:50/60HZ, Voltage:24V, Power:5W
• 1-Year limited warranty

• Product name: Double-Head Vibration Motor
• Model: R2838
• Voltage: DC 12V
• Load current: 260mA (DC 12V)
• Load speed: 3000-4800RPM

• Total 32 subdivisions in 6 modes to choose, can control 2-phase stepper driver forward and reverse, smooth operation and high power.
• 9V-42V DC power supply, up to 4A in 8 output currents, H-bridge bipolar constant phase current drive, fast operation and easy to connect, suitable for long-term use.
• Applicable to various stepper motors of Nema 17, 23 and 24, which work well with Nema motors and can also be used in various machines, such as X-Y-Z table, labeling machine, laser cutting machine, engraving machine, picking device, etc.
• Built-in overheat protection, under-voltage protection and over-current protection, with energy-saving semi-automatic current-lock function, single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
• Suitable for college students, engineers, technicians, factory individuals, DIY electronics enthusiasts, etc.

• SUPPORT AND COMPATIBILITY :The board fully supports computer software that uses parallel control, such as MACH3. Users can seamlessly connect their devices and control them with their preferred software. The board can be easily connected to a common anode/cathode driver with a 5V input level, making it suitable for a wide range of devices.
• 12-24V WIDE INPUT VOLTAGE RANGE:To ensure the safety of your computer, the board provides separate power supplies for USB and peripheral devices. This design prevents potential power problems from affecting the operation of the computer. The board has a wide input voltage range of 12-24V, making it compatible with a wide range of external devices. It also has a reverse connector to prevent accidental errors.
• MULTIPLE OPEN PORTS, PWM OUTPUT:This CNC breakout board has 17 available ports that can be connected to an optocoupler driver and used to control 5-axis stepper motors. This provides the user with flexibility and customization options. The board's P1 port is used as a PWM output, allowing the user to control the spindle speed controller via an optocoupler input. This feature ensures accurate and efficient control.
• OPTOCOUPLER ISOLATION:All input on the board are opto-isolated, which provides reliable and secure operation. Users can easily connect emergency stop, tool setting, limit switches, and other peripherals.
• The board contains a relay output port that can be used to control the spindle switch. The output port is conveniently located on P17. The board has a single opto-isolated 0-10V analog voltage output that allows spindle speed control via the corresponding analog interface on the drive. The output connector is located on P1.