Electricals Store - Electric Motors

• WEDOAUTO Power Window Lift Motor For WDE07400002-1

• Permanent magnet DC motor, can be applied to cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment. It drives up the super smooth, almost no noise.
• Hex Coupler Size: 18 x 12mm / 0.71 x 0.47\"; Ellipse Hole Size: 27 x 13mm / 1.06 x 0.51\".
• Bracket Size: 46 x 42 x 40mm/1.8 x 1.65 x 1.6\"(L * W * H); Bracket Mounting Hole Dia: 3.5mm/0.14\"
• Universal mounting hubs are designed to work with most 6mm shafts, mounting holes for 4-40 screws (not included).
• Package Content: 1 x DC Motor 12V 3500RPM + 2x DC Geared Motor Bracket + 2x 6mm Hex Coupling + 1x Hex Wrench + 1 x Accessories.

• Note: Its working voltage is 12~24V, and the starting current is more than 10A, so it must use enough power to make it rotate. Only when the 24V voltage is connected, the speed can reach the maximum 12000rpm.
• 895 DC Motor, 12V 24V 6000-12000rpm Micro Electric Motor Torque High Speed Double Ball Bearing Motor High Power Motor for DIY Drill
• It Is A 895 Double Ball Bearing.It Supports High-speed and High-torque DC Motors and Is A Hair Dryer Power Tool. High Speed,high Torque, Built-in Radiator, Low Noise.
• No load Rated Current:1.1A-1.5A, No load Speed:6000rpm at 12V;12000rpm at 24V, Torque:4.2kg/cm at 12V;8kg/cm at 24V. Work Temperature:-20?~85?, Work Humidity:10%~85%RH.
• SHOP WITH CONFIDENCE: To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied.

• The stand rotates up and down, as well as left and right. However, If your camera has no control signal output, it will not be able to control the rotation of the gimbal support bracket, please do not buy it.
• P/T bracket PTZ IP Camera 270 horizontal rotation, 60 vertical
• How to Programming Return Home position: 76+set+1+call for Turn on Return Home position 76+set+2+call for Turn off Return Home position When this function is turned on, after waiting for 5 minutes, the PT bracket will automatically return to the Home position
• 74+set+1+call :The bracket turns on the self-check function when the power is connected or after the power is turned off and restarted 74+set+2+call : The bracket turns off the self-check function when the power is connected or after the power is turned off and restarted 94+call :reset restart bracket 82+call :Reset P/T bracket

• 31 mm high quality copper tube motor with small size, low noise and high .
• Ball bearing design enhances the wear of the shaft.
• All-metal gears are impact-resistant, high temperature-resistant, highly wear-resistant, strong bearing capacity, sturdy and , effectively protecting the turbine worm motor body.
• Generally used in curtain machines, advertising equipment, window openers and intelligent devices.
• Made of high quality material with good toughness and durability, which improves the bearing quality and service life of the turbine worm gear motor.

• Motor performance. 373566&266149 12 Volts (DC) 75 RPM can quickly retract the awnings?A conversion connection plug is added, so that the two motor can be used Universal, and will no longer worry about buying the wrong motor because don't know the motor model
• Perfect match, this motor is specially designed for awnings and can match most motorhome awning
• The design of the small hexagon nut on the top of the motor is to consider that when the motor fails suddenly or there is no electricity, the can be manually retracted with a cordless electric drill.
• Compatible with all Power Solera Awnings assemblies, The warranty is one year, and the new motor can continue to work for you for many years.

• TB6612 Mosfet for Arduino Motor Shield Standard IIC I2C TB6612FNG Stepper Motor PCA9685 PWM Servo Driver Shield V2 Robot PWM Mega R3 Replace L293D
• H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak)
• Completely stackable design: 5 address-select pins means up to 32 stackable shields
• Characteristic: for Arduino interface is fully compatible expansion
• Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.

• SMOOTH Benefiting from high and low noise,it works smoothly.
• LONG SERVING LIFE motor features high speed of 3000/5500rpm and large moment of force The stator windings of the motor are copper wire, low heat, low loss, long serving life.
• SUITABLE FOR DIY GENERATOR It is a permanent magnet DC motor and also is ideal for DIY generator
• TWO CHOICES high speed DC motor can support CW/CCW rotation. You can choose 12V or 24V.
• WIDE APPLICATION These DC Motor Can be applied in cotton candy machine, small cutting bench, grinding machine, polishing machine, cutting machine, electric drill, cotton candy machine, small generator ,Toys, blower, blender, egg beater, small , medical equipment and other numerous applications.

• Non-Drift Silicon Light Sensor Comes With Ir Filter
• Dc Relay With Zero-Crossing Circuitry, Offers Extra Durability
• Has Conformal Coated Pcb
• Exceeds 10000 On/Off Switching Cycles
• Provides 510 J Mov Surge Protection

• Overload Function: The starter is the best starter with built in overload function, adjustable from 9A to 13A.
• Purpose: Magnetic motor starters can be used with single phase motors as well as with 3 phase motors.
• Easy Wiring: The starter housing has four perforated holes for incoming and outgoing wires, making it easy to connect it to your circuit.
• Reset Button: The magneto starter has a manual reset button, you can also switch it to automatic reset for more convenience.
• ABS Shell: ABS has good flame retardancy, which can ensure the safety of the circuit and provide you with peace of mind.

• Includes; (8 Pack) N119739 Brushes.
• These carbon brushes makes sure your motor runs properly, and fixes a motor that operates intermittently.
• 869734 Brush Set Replaces 879058 & N119739 For 64 Tool Types Listed Below.
• A brand-new, unused, unopened, undamaged item in its original packaging.

• Attributes: This is a variable voltage fan speed controller, the input voltage is AC 120-220V, the output voltage is 10-110V (adjustable), the maximum power is 4000W, the current is 15A, and the adjustable voltage range is 0-110V
• Powerful Function: The voltage controller has variable thyristor and electronic voltage regulator. The maximum power of connecting inductive loads (such as fans, routers) is about 1500W, and the limit power of connecting resistive loads (such as electric furnaces, heating wires) is 4000W
• High Security: No delay, surge protection, anti-spike, arc-suction multiple protection, both input and output current are AC, effectively ensuring your safety. The core chip adopts a new type of bidirectional high-power thyristor with a maximum current of 15A, which effectively solves the problem of wire overcurrent when the heat dissipation resistance is too large
• High-Quality Materials: Our voltage stabilizer adopts imported high-quality chip thyristor, all-aluminum heat sink is suitable for high-temperature circuits, and adopts multi-functional industrial sockets. The copper parts are thicker inside, with high current, good contact and high safety. The fan speed control switch has a power light, and the heat dissipation connector can help quickly dissipate heat and prevent burnout
• Wide Range of Applications: Our ac motor speed controller can be widely used in fans, electric furnaces, water heaters, small motors, electric irons, tungsten lamps and other electrical appliances. At present, most motors do not support voltage regulation (such as, single-phase motors, asynchronous motors, dual-value capacitor motors, etc.), which are not suitable for smart home appliances with complex circuit boards