Hydraulic Test Pump, Water Pressure Tester High Performance Manual Portable for Chemical Industry for Plumbing for Construction for Petroleum

By Brand : 1

Avg Customer Reviews :

Feature: 1. The manual pressure test pump has an extended handle design. The handle is thickened and not easy to break. The length of the extended rod is 30cm, which saves effort and is easy to use. 2. It is suitable for the pressure test of various pressure vessels, pipelines, valves, etc. with water or hydraulic oil as the medium, and also for hydraulic energy to provide the required pressure. 3. The normal tap water pressure is 0.3MPa, high?rise residential buildings are 0.4MPa, and the water pipe pressure is generally pressurized water pressure to 0.8MPa?1.0MPa. (The pressure of tap water is 0.1MPa and 1KG). 4. Fine workmanship, good performance and durability. It is suitable for chemical industry, construction, plumbing, petroleum, coal, shipbuilding and other industries. 5. During installation, the pressure relief hole must be aligned with the water discharge hole on the water tank to avoid water splashing on the ground or body when the pressure is relieved. And the water inlet pipe and filter must be tightly sleeved to avoid damage to the instrument. Specification: Item Type: Water Pressure Tester Material: Aluminum Alloy + Plastic Weight: Approx. 1425g / 50.3oz How to Use: 1. Connect the water outlet hose to the tested water pipe (Note: the connection is sealed). 2. Fill the pipe under test with water and exhaust the air, then turn off the switch. 3. Fill the water tank with clean water, then tilt the plate rod up and down to start pressure test and pressurization. 4. When the reading of the pressure gauge rises to the required pressure, the pressurization can be stopped. 5. After the pressurization is stopped, if the pressure shown on the pressure gauge does not drop, it can be proved that the pressure resistance of the pipeline is good; on the contrary, it can be proved that the sealing performance of the tested p