Epoxy Coatings And Groutings Products

• [ EASY TO USE ] Requires no mixing.
• [ INSTANTLY CURED] In minutes with a UV lamp for about 5-10 minutes.
• [ CRYSTAL CLEAR ] The UV curing resin can cure smooth, crystal clear, glossy finish, providing excellent scratch resistance, stain resistance, and yellowing resistance.
• [ GREAT PACKAING ] Easy to apply packaging and keeps unused uv resin intact for at least 1 year
• [NON-TOXIC] Oytra UV Resin formula is non-toxic which makes it safe to use. It does not include any VOCs and solutions. It is odorless, non-flammable, and non-hazardous

• 1.Material: Contains water, resin composition, the surface is smooth, for tiles
• 2.Tiles at the gap, and tiles can be scrubbed together to prevent the black mold.
• 3.Size: about 5 x 21cm net content of 180ML.Material: water, resin, aluminum oxalate.
• 4.Packaging include:1 x gap filling agent (Shake before use).
• 5.Weight: 180g.

• [ EASY TO USE ] Requires no mixing. Turns out to be soft bendable item when cured
• [ INSTANTLY CURED] In minutes with a UV lamp for about 5-10 minutes.
• [ CRYSTAL CLEAR ] The UV curing resin can cure smooth, crystal clear, glossy finish, providing excellent scratch resistance, stain resistance, and yellowing resistance.
• [ GREAT PACKAING ] Easy to apply packaging and keeps unused uv resin intact for at least 1 year
• [NON-TOXIC] Oytra UV Resin formula is non-toxic which makes it safe to use. It does not include any VOCs and solutions. It is odorless, non-flammable, and non-hazardous

• Ready to use ? One component tile grout, tile sealant and crack filler which is easy to apply. Can repair, seal any cracks up to 5mm.
• Eco-friendly ? Dr Fixit Kwik n Ezee is a Non Hazardous sealant. It a water based, no organic volatile tile grout and sealant which is ecofriendly. It is also Safe for Home use and DIY tile sealing purposes
• Multipurpose ? KwiknEzee is a crack filler suitable for different surfaces like concrete, wood, PVC and metals. Use KwiknEzee as a gap filler for tiles waterproof to fix bathroom tubs, wash basin or any other gaps.
• Excellent adhesion ? sets in wet and dry condition and damp surfaces easily like bathroom floor, tiles, nahni trap etc
• Dual exposure application - Suitable for indoor/outdoor applications and all kind of floor tiles, use Dr Fixit Kwik N Ezee gap for bathtub tiles, washbasin, bathroom toilet tiles, balcony sink, porch tiles, corridor tiles and other cracks landscape. It is a sealant, gap and crack filler for home use.

• 25 Grams UV Curing Resin + UV Lamp Combo
• [ INSTANTLY CURED] In minutes with a UV lamp for about 5-10 minutes.
• [ CRYSTAL CLEAR ] The UV curing resin can cure smooth, crystal clear, glossy finish, providing excellent scratch resistance, stain resistance, and yellowing resistance.
• [ GREAT PACKAING ] Easy to apply packaging and keeps unused uv resin intact for at least 1 year
• [NON-TOXIC] Oytra UV Resin formula is non-toxic which makes it safe to use. It does not include any VOCs and solutions. It is odorless, non-flammable, and non-hazardous

• [ EASY TO USE ] Requires no mixing. 100 Grams in one bottle
• [ INSTANTLY CURED] In minutes with a UV lamp for about 5-10 minutes.
• [ CRYSTAL CLEAR ] The UV curing resin can cure smooth, crystal clear, glossy finish, providing excellent scratch resistance, stain resistance, and yellowing resistance.
• [ GREAT PACKAING ] Easy to apply packaging and keeps unused uv resin intact for at least 1 year
• [NON-TOXIC] Oytra UV Resin formula is non-toxic which makes it safe to use. It does not include any VOCs and solutions. It is odorless, non-flammable, and non-hazardous

• Anti-stain properties make it suitable for maintainence - free use in residential, commercial, & hospitality sector.
• Resistance to bacteria & fungal growth makes it suitable for hospitals, operation theatres, clinics, swimming pool and kitchens.
• High bond strength makes it suitable for use with ceramic tile, porcelian, and vitrified tiles, large format tiles & stones, low thickness slabs, natural stone, artificial stone, etc.
• Low water absorption and resistance to a wide degree of temperature variation ensures that it can be used for wet areas, swimming pools, spas, jacuzzis, bathrooms, public toilets, and showers.
• This Floorex Flo-Epoxy Tile Grout is crack-free, stain-free and waterproof.

• [ EASY TO USE ] Requires no mixing.
• [ INSTANTLY CURED] In minutes with a UV lamp for about 5-10 minutes.
• [ CRYSTAL CLEAR ] The UV curing resin can cure smooth, crystal clear, glossy finish, providing excellent scratch resistance, stain resistance, and yellowing resistance.
• [ GREAT PACKAING ] Easy to apply packaging and keeps unused uv resin intact for at least 1 year
• [NON-TOXIC] Oytra UV Resin formula is non-toxic which makes it safe to use. It does not include any VOCs and solutions. It is odorless, non-flammable, and non-hazardous

• TetraClean Highly Concentrated Cement Remover and Inorganic Dirt Remover eliminated all residues of cement, glue, grout, and varnish, without changing the color of joints and restoring the original appearance to the treated surfaces
• It is also highly effective on removing inorganic dirt and brick efflorescence.
• To use - Remove loose dust from the surface and wait for some time to let it dry.
• Spray directly on the surface and rub with a nylon brush leave it for 5- 10 minutes. Rub again with the brush and rinse with water. If the result is only partially achieved, repeat the application process one more time.
• Note - Before applying the product to the whole surface, always test a small, unexposed area or unused piece to check its suitability for use.

• [ EASY TO USE ] Requires no mixing.
• [ INSTANTLY CURED] In minutes with a UV lamp for about 5-10 minutes.
• [ CRYSTAL CLEAR ] The UV curing resin can cure smooth, crystal clear, glossy finish, providing excellent scratch resistance, stain resistance, and yellowing resistance.
• [ GREAT PACKAING ] Easy to apply packaging and keeps unused uv resin intact for at least 1 year
• [NON-TOXIC] Oytra UV Resin formula is non-toxic which makes it safe to use. It does not include any VOCs and solutions. It is odorless, non-flammable, and non-hazardous

• Ideal for repairing cracks on gutters, roofs, flashing, ductwork, PVC, masonry, concrete and more.
• Prevent surface from moisture penetration and corrosion.
• "You can use it for metal, galvanized metal, PVC, concrete, masonry, asphalt roofing materials, vinyl siding, fiberglass etc."
• Dries in 20-30 minutes to touch.
• Paintable finish.

• USP - Dr. Fixit Dampguard Classic is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, with additives in water as a medium
• WATERPROOFING OF WATER TANKS ? Dr Fixit Dampguard Classic is a ?Potable water safe? coating for waterproofing of water tanks
• INTERNAL WALL DAMPNESS RECTIFICATION- Dampguard Classic can be used to rectify internal wall dampness
• ANTI-MICROBIAL & ANTI FUNGAL - It is used as an internal coating for the waterproofing & treatment of water tanks by providing anti-microbial & anti-fungal properties
• WATER RESISTANT - It has excellent water resistance with a quick adhesive tendency to concrete surfaces
• HOW TO USE ? 1) Use patra to remove the paint from the walls 2) remove the putty till you see the plaster of the wall 3)Use wire brush to clean the wall 4)Use brush to apply water on the wall 4)Mix Dr fixit dampguard in 1 unit water,1 unit base and 1 unit hardener ratio 6) Use a brush to apply Dr Fixit
• AREAS OF APPLICATION - Internal walls, ceilings, RCC water tanks

• USP - Dr. Fixit Dampguard Classic is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, with additives in water as a medium
• WATERPROOFING OF WATER TANKS ? Dr Fixit Dampguard Classic is a ?Potable water safe? coating for waterproofing of water tanks
• INTERNAL WALL DAMPNESS RECTIFICATION- Dampguard Classic can be used to rectify internal wall dampness
• ANTI-MICROBIAL & ANTI FUNGAL - It is used as an internal coating for the waterproofing & treatment of water tanks by providing anti-microbial & anti-fungal properties
• WATER RESISTANT - It has excellent water resistance with a quick adhesive tendency to concrete surfaces
• HOW TO USE ? 1) Use patra to remove the paint from the walls 2) remove the putty till you see the plaster of the wall 3)Use wire brush to clean the wall 4)Use brush to apply water on the wall 4)Mix Dr fixit dampguard in 1 unit water,1 unit base and 1 unit hardener ratio 6) Use a brush to apply Dr Fixit
• AREAS OF APPLICATION - Internal walls, ceilings, RCC water tanks

• Protection of all medium to dense porous surfaces.
• Invisible barrier that is resistant to moisture and stains while allowing vapor to escape.
• It will not alter the natural look.
• Ideal for Granite, Stucco, Agglomerate, Porcelain Tile, Sanded Grout, Travertine, Quartz, Terrazzo. and more.
• Special Features: Weather Resistant | U.V. Transparent | OK for Food Areas | Interior & Exterior Use

• Very tough yet elastic coating. Breathable, hence can be applied over damp surfaces
• Provides strongly bonded waterproof coating
• No dilution required, ready to use, brush applicable
• Tintable and can be used over painted surfaces. Prevents Mildew, Fungal & bad odour
• Provides coverage of 20-27 sq. ft./kg in 2 coats

• USP - Dr. Fixit Crack-X Paste is a ready to use crack filler for internal & external surface cracks on roofs, walls in plaster. Composed of high-quality weather durable acrylic emulsion polymers with properly selected graded fillers & pigments
• READY TO USE - It is a single pack, ready to use flexible putty for filling the cracks in plastered surfaces because it has excellent bonding, water resistance, aesthetics & durability whilst being extremely easy to apply. It is non sagging composition, low shrinkage and over coatable by any type of polymer-based paints, after 24 hours
• APPLICATION AREAS ? Dr Fixit Crack X Paste can be applied to home areas of roofs and walls
• HOW TO APPLY - Step 1 - Create a 5mm x 5mm grove using a chisel Step 2 -Clean the dust, plaster and loose pieces in the groove and wash with water Step 3 - Apply Crack-X paste using a putty blade Step 4 - Wait for 4-5 hours to dry and then apply a second coat
• QUICK DRYING ? Crack X Paste is quick drying after applying the 2nd coat in 2 hours