DC Submersible Pump, Non Rust Booster Pump Stainless Steel Corrosion Resistance 300W 12V for Land Construction

By Brand : Luroze

Avg Customer Reviews :

Specification: Item Type: DC Submersible Pump Model: LSNPP-12 Rated Power: 300W Maximum Flows: 3meter?/h Maximum Lift: 10m Power Supply Voltage: DC12V Outlet Diameter: Approx. 25mm / 1.00in Motor Speed: 3800r/min Material: Stainless Steel Solar panels and batteries can be used as power sources to drive pumps How to Use: 1. Check if the power supply voltage matches the pump 2. Check whether the red cable wire is connected to the positive (+), and the other wire should be connected to the negative (?) 3. Before using the pump, please put the pump in the water first, then power on 4. After using or not using the pump, the battery should not be immersed in water for a long time. After use, please keep the pump away from water and dry in a ventilated place Package List: 1 x DC Submersible Pump Note: 1. No idling is allowed, and the idling of the pump motor should not exceed 1 motor, otherwise the oil may be damaged 2. Do not pull the cable when putting in or pulling out the pump in water 3. If there are debris such as sediment in the water source, please put the pump in bamboo basket or other pollution prevention equipment to prevent clogging 4. The lift is too low, please check whether the connecting line is too long or smaller than the pump cable, open the bottom mesh to check whether the impeller is blocked, or the power is insufficient 5. Prohibit the use of household power 220V