Battery protection board, protection board, 36V 30A inverter skateboard car for electric power assistant car for electric car

By Brand : Byged

Avg Customer Reviews :

Specifications: Applicable voltage: 36V Applicable power: 1000wMaximum working current: 30A Continuous maximum current: 20A Overdischarge protection voltage: 2.6vOvercharge protection voltage: 4.25vCharging current: Maximum 10ABalance voltage: 4.2vWeight: 46gBMS Protection Board Wiring Steps1. Firstly connect the batteries in series2. Ensure that the voltage of each string is the same (the difference between the highest voltage and the lowest voltage is preferably within 0.1V), and the voltage range is between 3.2-4.0V.3. Firstly connect the distributed cable, connect according to the diagram, and insert the cable port into the board port after checking it is correct (first connect the battery, then insert the board, the step cannot be reversed).4. Check whether the total positive voltage of the C-port and P-port to the battery is equal to the total voltage of the battery. If they are equal, the board is working normally.5. Solder the battery negative B- to the port marked B- on the board.6. Both the battery output negative electrode and the charging negative electrode of the same port board are connected to the port marked C- on the board (the P- port is just floating).7. Separate port (different port) board, the battery output negative pole is welded P-, and the charging negative pole is welded into the port marked C- on the board.Package included: 1 x Protection Board 1 x Cable Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.