GI Rack for Automatic Sliding Gate

By Brand : INTERGLIDE

Avg Customer Reviews :

Gate motors are used to push and pull swing gates to open and close. The motors used with swing gates are often fixed to the gate close to the hinge and the arms of underground motors rotate about the hinge point itself. This means that a large force is required to open swing gates thanks to the principle of leverage. However, the opposite is also true, so a force applied at the open edge of a swing gate can be enormous at the hinge and often weakens the foundation of the motor or the motor arm itself can get damaged.There the requirement of additional locking for gate, once closed. Lever locks function in the same way as most ?Yale style door locks. A lever in the lock unit slides into a corresponding aperture in the latch and holds the two together. Works at 24V DC. Lock is provided with synthetic rubber supported base plate, with 2 release keys. These can be electromechanical and supplied with a physical lock and keys. Using the keys to unlock the latch overrides the electrical operation. In electrical and manual operation, the lever is withdrawn from the latch to allow the gate to open.