Buy Online
Save9 Waterproofing Tape | Bituminous Flashing Tape | DIY Product | Instantly Plugs Out Leakage | Affordable | Aluminium Top | 100mm x 10ft
from IndianConstructionIndustry.Com in Association with Amazon India
Home»Water Proofing»Water Proofing Membrane»Save9 Waterproofing Tape | Bituminous Flashing Tape | DIY Product | Instantly Plugs Out Leakage | Affordable | Aluminium Top | 100mm x 10ft
Save9 Flashing Tape are a heavy duty self-adhesive, aluminum-backed flashing tapes specially formulated for waterproofing roof to wall and other building joints. It consists of a cold-applied aluminum foil coated with a bituminous adhesive and a plastic interleaving for cleaner handling and easier release. The aluminum laminate has a grey weatherproof lacquer finish that resembles lead. These tapes are resistant to water, cement-water, sea water, domestic sewage, bitumen, light fuel oil, diesel, alkali, acid, ethanol, methanol and petrol. This product has a unique acrylic pressure sensitive adhesive that aggressively sticks and stays stuck both at lower and higher application temperatures than traditional flashing tapes. It even adheres to damp surfaces. The proprietary backing seals around nails and staples to prevent moisture intrusion. This backing resists punctures and tears, yet it is thin to fit conveniently into corners and under siding. The split paper release liner provides fast application with easy and accurate positioning of the tape.
Item part number : Save 9 Stitch Super Plus -100mm-pack1
Product Features :
STRONG BUILD:- Save 9 Flashing Tapes are a heavy duty self-adhesive, flashing tapes specially formulated for waterproofing roof to wall and other building joints. These tapes are resistant to water, cement-water, sea water, domestic sewage, bitumen, light fuel oil, diesel, alkali, acid, ethanol, methanol and petrol.
WIDE USAGE:- Flexible waterproofing seal for expansion joints subject to large number of movements in service | Flexible waterproofing seals in tunnels, road-works, etc | Sealing expansion joints in prefabricated panels, corrugated roofs (Any substrates) | Sealing structural joints in facades | Sealing joints in hydraulic works, such as channels, basins, drains, pipe-works | Waterproofing expansion joints in flat covering layers.
SUPERIOR QUALITY:- High tack adhesive sticks and stays stuck to most common building materials. Unique adhesive even adheres to damp surfaces. Adhesive provides an unusual combination of both cold temperature and hot temperature adhesion to most substrates, which can extend the construction season in many climates. No adhesive melting or staining in summer heat
APPLICATION Peel back about 50 mm 100 mm of one side of the release liner to position the tape. Remove the liner while applying firm pressure to the flashing tape surface as it comes into contact with the building surface. Repeat this procedure with the remaining side of the paper release liner and tape apply sufficient pressure along the entire tape surface to ensure a continuous seal and to prevent trapping air beneath the tape. The surface should be clean and dry.
AVAILABLE SIZES:- Available in 50mm & 100mm rolls with & without aluminum top.
To Know more about the events about Air Conditioners, Basements, Bathrooms, Bedrooms, Cabinets, Decorating, Design Plans, Doors, Electrical Lightings, Flooring, Home Security, Kitchen, Landscape, Painting, Plumbing, Fixtures and many more..