Buy Online
Berger Paints Home Shield Crack Filler Paste (500 g), White (F00FC00991000501)
from IndianConstructionIndustry.Com in Association with Amazon India
Home»Ready Mix Concrete»Berger Paints Home Shield Crack Filler Paste (500 g), White (F00FC00991000501)
Ready to use crack filler for external and internal plaster cracks. Crack fill paste is a single pack, ready to use flexible putty for filling the cracks in plastered surfaces. Directions: clean the crack from any kind of laitance, grease, oils, wax, polish etc. Remove loose particles from joints. The edges of the cracks/joints should be neat and sound. Make sure the surface is free from puddles of water. Moisten the crack-surface before applying crack fill paste. Fine hairline cracks must be widened up to 1 mm minimum followed by filling. For filling crack fill paste on the internal surface-existing painter's putty or pop must be removed till plaster surface is exposed. For porous surfaces, apply primer coat prepared with crack fill paste and water in 1 : 1 proportion over the crack. Fill crack fill paste when the surface is tacky but not dried completely. Press crack fill paste into the cracks using a putty knife or spatula. Level the surface with a putty knife to get a smooth and clean surface. Care must be taken to avoid formation of cavities/bubbles during application. A further coat of crack fill paste is undertaken after 4 hours of the application, when the first coat of crack fill paste is completely cured. Painter's putty or pop can be taken up once it is fully dry. For best results allow crack fill paste to cure for 7 days. To be stored in cool and dry place, away from direct sunlight. Health and safety precautions- while using crack fill paste use rubber hand gloves, dust mask and safety goggles. In case of contact with skin, wash thoroughly with plenty of clean water. If accidentally swallowed, immediately seek medical advice. Do not induce vomiting. Keep out of children's reach.
Product Details :
Manufacturer : Berger Paints
Item model number : F00FC00991000501
Product Dimensions : 11.5 x 11.5 x 9.3 cm; 500 Grams
ASIN : B08FN6QNV8
Product Features :
Material: Plastic, ,
Item Dimension: 115mm x 115mm x 93mm
Not Available
Item Dimension: 115mm x 115mm x 93mm
Features: Easily Applicable by Putty Knife Like Conventional Putties; Excellent Adhesion; Non-sagging; Can Accommodate Minor Movements in Cracks; Non-staining; Can Be Tinted With Water Based Stainers
Overcoatable With Any Kinds of Polymer Based Paints After 24 H; Usage Area: External & Internal Plastered Brick Masonry Wall Cracks of Up to 5 Mm Width; Not for Cracks in Pop or Paint's Putty
Affix the stencil on the chosen spot and use the paint and roller to make beautiful designs. Elaborated instructions are mentioned in the DOU Booklet provided in the kit.
To Know more about the events about Air Conditioners, Basements, Bathrooms, Bedrooms, Cabinets, Decorating, Design Plans, Doors, Electrical Lightings, Flooring, Home Security, Kitchen, Landscape, Painting, Plumbing, Fixtures and many more..