Adhesives And Sealants By Fasto Adhesives

• Fasto S982 is suitable for bonding and sealing gear box & pump flanges, air conditioning ducts, oil sumps, solar panels, ceramics and many more electrical & mechanical equipment and machines. It is suitable for bonding & sealing steel, aluminium, composites, glass, plastics, rubber, concrete, etc.
• DIRECTIONS FOR USE Remove all the rust,scale,dirt,dust,grease,oil,release agents,or other contaminants from the surfaces to be bond or seal. Surfaces can also be cleand using suitable Fasto cleaner. Apply Fasto S982 with suitable dispensing equipment. Assemble the surfaces immediately in order to avoid skin over.
• Any tooling, if require, to be done before skin-overtime. Ensure Apply S982 in sufficient quantity and wipeout the excessive quantity. Also use masking tape to ensure aesthetically clean & neat joints. Always remove masking tape after tooling and before skinning of sealant.
• Optimal storage conditions are between 13?C and 30?C.
• Temp Resist (?C) -24 TO 230
• Important Note : Ensure that the product is tightly closed after use, to avoid the product from being cured/dried up.

• Handling time: 20 min,Full cure time: 24 hrs
• Tempture : -24*C to 260 *C
• Shelf Life:18 months. Warning ! Silicone Sealants gets cures when comes in contact with moisture. If. For extended shelf life, keep the tube tightly packed. Avoid direct sunlight or heat.
• Bonding & Sealing metal,boiler joints, gaskets & o-rings,electrical, mechanical equipment
• Pack Size: 100 gm
• Important Note : Ensure that the product is tightly closed after use, to avoid the product from being cured/dried up.