Air Compressors By Elephant

• Capacity : 6 Ltr. ---------------- Power : 1.0 HP.
• Max Pressure : 8 BAR/116 PSI
• Air Delivery : 135 L/Min.
• Voltage : 220V
• Speed : 1440 RPM

• Range (100 - 213 psi) --------------------------(7 - 15 kg/cm? )
• Diff. (24 - 100 psi ) ----------------------(1.7 - 7 kg/cm? )
• Amp : 6 Volts 500
• Phase : 3 Cycle 50 Hz

• Tire Inflators NM-03, NM-04, NM-05, NM-06 and NM-07.
• 50 liter horizontal tank and 200 L/min. @ 90 PSI. 110 Max PSI provides plenty of power to tackle DIY projects. Operates on 220 volt (Single Phase) house outlet Oiled pump for maintenance-free ownership and strong, reliable motor output. Conveniently placed gauges are easy to read & this compressor's compact design makes it easily portable Ideal for tire and ball inflation; it's also perfect for powering air brushes, air/ brad nailers, upholstery projects and more.
• Power : 2 HP, Cylinder : 48X1 mm, Speed : 2850 r/min, Pressure : 8 Bar, Weight : 31 Kg.

• QUIET YET POWERFUL: This twin-cylinder, 1/4 horsepower airbrush compressor delivers excellent power with approximate air delivery of 6 BAR, with advanced, precision-forged pistons for very little noise (59 dB). Oil-less design makes this compressor suitable for food decorating and body/nail art along with all other standard airbrushing applications.
• SMOOTH, PRECISE AIR OUTPUT: A sensitive pressure regulator with integrated gauge and water-trap allows precise adjustment and control of airflow to deliver clean, dry air.
• POWER-SAVING & DUAL-OPERATING MODES: When switched on in the primary position, compressor runs until pressure reaches approximately 60 psi, then cycles off until the pressure drops to 40 psi, when the unit restarts. This power-saving feature reduces motor wear while maintaining enough pressure to operate most airbrushes. In the secondary switch position, the compressor runs continuously, when maximum output is desired (up to 85 psi).
• *Not Recommended for : Car, Bike, Scooter trye inflation, not for commercial use.
• AIRBRUSH: Operating Pressure -15-50 psi. Cup Capacity : 7 ml, Nozzle Size : 0.2 mm. Gravity feed CUP, Air Inlet : 6 mm. Body Length : 150 mm. Control : DOUBLE ACTION Push-Botton.

• 50 L horizontal tank and 0.36 CFM 90 PSI. 110 Max PSI provides plenty of power to tackle DIY projects. Operates on 120 volt house outlet
• Oiled pump for maintenance-free ownership and strong, reliable motor output
• Conveniently placed gauges are easy to read and this compressor's compact design makes it easily portable
• Suitable for tire and ball inflation, it's also perfect for powering air brushes, air/ brad nailers, upholstery projects and more
• Power : 2 HP, Cylinder : 48X1 mm, Speed : 2850 r/min, Pressure : 8 Bar, Weight : 35 Kg, Color - Grey

• 30 liter horizontal tank and 0.36 CFM @ 90 PSI. 110 Max PSI provides plenty of power to tackle DIY projects. Operates on 220 volt single phase electricity.
• Oiled pump for maintenance-free ownership and strong, reliable motor output
• Conveniently placed gauges are easy to read and this compressor's compact design makes it easily portable
• Suitable for tire and ball inflation, it's also perfect for powering air brushes, air/ brad nailers, upholstery projects and more
• Power : 2 HP, Cylinder : 48X1 mm, Speed : 2850 r/min, Pressure : 8 Bar, Weight : 30 Kg, Color - Grey

• PU Tubing Pipe Material: PU( Polyurethane )
• PU Tubing Pipe Size: 12mm (Outside diameter) 8mm (Inside diameter) , Total Length: 10 meters
• PU Tubing Pipe Compression-Resistant : 0.8MPa(8.5kgf/cm2); Tensile Stress: 550kg/cm2; Use Range: Pneumatic Tools
• Tubing Pipe Working Temperature: -20?--80?/ -40 -176; Working Pressure: 1Mpa; Burst Pressure: 2.5Mpa; ; Anti-abrasion: 35mg; Resistant to Oils With No Corrosive
• Tubing Pipe Features: Excellent flexibility, Small bending radius; Good shock resistant; Wide range for working temperature and pressure; Excellent chemical properties, Minimal pressure loss; Constant hardness,Long service life; Non-toxic, Tasteless

• Elephant 1 HP Oil Free & Noiseless Air Compressor 30 Litre
• Power : 1 HP ---------- Speed : 1440 rpm
• Max Delivery : 135 L/min ------------ Max. Pressure : 8 bar
• Tank Volume : 30 Lit.
• Weight (N.W) : 31 Kg

• POWER-SAVING DUAL-OPERATING MODES: When switched on in the primary position, compressor runs until pressure reaches approximately 60 psi, then cycles off until the pressure drops to 40 psi, when the unit restarts. This power-saving feature reduces motor wear while maintaining enough pressure to operate most airbrushes. In the secondary switch position, the compressor runs continuously, when maximum output is desired (up to 85 psi)
• SUITABLE: For airbrushes equipment those require pressure up to 6 bar
• QUIET YET POWERFUL: This twin-cylinder, 1/4 horsepower airbrush compressor delivers excellent power with approximate air delivery of 6 BAR, with advanced, precision-forged pistons for very little noise (59 dB). Oil-less design makes this compressor suitable for food decorating and body/nail art along with all other standard airbrushing applications
• SMOOTH, PRECISE AIR OUTPUT: A sensitive pressure regulator with integrated gauge and water-trap allows precise adjustment and control of airflow to deliver clean, dry air

• QUIET YET POWERFUL: This twin-cylinder, 1/4 horsepower airbrush compressor delivers excellent power with approximate air delivery of 6 BAR, with advanced, precision-forged pistons for very little noise (59 dB). Oil-less design makes this compressor suitable for food decorating and body/nail art along with all other standard airbrushing applications.
• SMOOTH, PRECISE AIR OUTPUT: A sensitive pressure regulator with integrated gauge and water-trap allows precise adjustment and control of airflow to deliver clean, dry air.
• POWER-SAVING & DUAL-OPERATING MODES: When switched on in the primary position, compressor runs until pressure reaches approximately 60 psi, then cycles off until the pressure drops to 40 psi, when the unit restarts. This power-saving feature reduces motor wear while maintaining enough pressure to operate most airbrushes. In the secondary switch position, the compressor runs continuously, when maximum output is desired (up to 85 psi).
• CONSTANT PRESSURE WITH ZERO PULSATION: Air is drawn from the large, 3.5-liter air storage tank, providing constant, regulated pressure and smooth output. This eliminates the pressure pulsations common with tank-less compressors. Tank features a threaded drain plug for purging any accumulated water and a pressure-release valve for safety (release pressure prior to draining).
• AIRBRUSH: Operating Pressure -15-50 psi. Cup Capacity : 7 ml, Nozzle Size : 0.2 mm. Gravity feed CUP, Air Inlet : 6 mm. Body Length : 150 mm. Control : DOUBLE ACTION Push-Botton.