Concrete / Concrete Products By PC Products

• Fast curing epoxy stick for plumbing repairs. Works on copper, PVC and steel pipe and fittings
• Approved repairs to pipes and fittings carrying potable water; return to service in less than 60 minutes
• Cures wet or dry; sand, drill and paint; continuous service temperature range from -20 to 250 degrees F
• Epoxy putty for rapid sealing in plumbing applications such as repairing leaking pipes, tanks, and valves
• Hand moldable without need for mixing or application tools

• Static mixing nozzle for 22-oz. (600 ml) PC-Concrete epoxy cartridge
• Nozzle mixes and dispenses two-part epoxy through its chambers
• For 1:1 mix ratio

• Epoxy putty for temporary repair to masonry and concrete objects such as statues, steps, and curbs
• Hand moldable without need for mixing or application tools
• Continuous service temperature range from -20 to +200 degrees F
• Provides work time of 3 minutes and cure for service time of 60 minutes
• package include 1pc

• Two component, professional grade, high-strength anchoring epoxy for cracked and uncracked concrete
• Use for anchoring threaded rod and reinforcing bar into cracked or uncracked concrete using hammer drill or threaded rod into uncracked concrete using core drill
• Code compliant for Bulk Applications; Meets building and engineering codes: IAPMO UES ER-632, IBC/IRC 2018, 2015, 2012 & 2009, Florida Building Code 2017 & 2014, AASHTO M235 / ASTM C881-15 Type I, II, IV & V Grade 3 Class A, B & C
• Apply Concrete PRO with any high thrust standard size caulk gun and 600ml dual cartridge caulk gun
• Unlike other anchoring epoxies, PC-Concrete PRO can be used in smooth bore holes; no roughing interior walls of holes
• May be used in dry, water saturated, and water-filled conditions using threaded rod or rebar
• Made in the USA

• Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry
• High-tack paste resists moisture for application in damp environments and can be used in vertical applications
• Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F
• Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F)
• Meets ASTM C881-99