Construction Materials - Hallow Bricks Products

• HIGH-QUALITY MATERIAL - The concrete hole saw kit made of tungsten steel and alloy, high-frequency welding technology, welding openings is very strong, smooth inside and outside welding mouth.
• LONG SDS PLUS SHANK - Come with a SDS puls shank for this cement drill bits, male thread adapter design, match your drill chuck fastening and much more improve speedier drilling
• 3 DIFFERENT SIZED - wall hole saws (65mm, 50mm, 30mm ) are prepared for different cutting diameters, an all-in-one choice for daily use.
• ULTRA-STURDINESS AND DURABLE - Simple operation, easy to use for fast and drilling. durability for years of use under the toughest conditions with uncompromised performance.
• WIDELY APPLICATION - This cement brick electric hammer drill bit widely used for cutting clean holes in concrete, brick and block work, drilling walls, stones, installation of air-conditioning, etc.

• EASY TO INSTALL: The hole saw specification is 85mm, with standard size, can be stably installed on the electric hammer, reliable and easy to operate.
• DURABLE MATERIAL: Cemented carbide cutter head has the characteristics of high hardness, strong impact resistance and fast drilling speed.
• GOOD PERFORMANCE: Forged with cemented carbide, quenched at high temperature, with high hardness and not easy to break, which is incisive and durable.
• WIDE APPLICATION: Electric hammer hole saw is widely used for cutting clean holes in concrete, brick work, drilling wall, stones, installing air conditioners, etc.
• HIGH EFFICIENCY: With compact structure and easy operation, this hole saw can precisely cut and accurate holes, efficient and durable.

• As shown in picture
• is_customized: Yes, Material: Tungsten Carbide, length: 200mm, Use: ry Drilling, DIY Supplies: Tiling
• Model Number: VD-EH6810121416DB200, Type: Core Drill Bit, ITEM: electric Hammer Drill Bits, Diameter: 6-16mm, QTY: 6PCS
• 1X Generic Four hollow squre shank 6pcs 6-16*200mm hard alloy Tip electric Hammer Drill Bit for concrete/brick/wall drilling

• Item: Pin type Anchor Fastener With bolt and washer, 10 x 75 mm, 12 Pieces
• Round and smooth end for easy insertion, Drill bit diameter should same as Anchor diameter.
• Flat and hard head prevent any damage in thread during installation, good to use in concrete and masonry / grout filled cmu, any hard bricks wall / plastered wall.
• Hard Steel used with zinc plating to prevent any rust easly.
• Dimention: - Diameter - 10 mm, Lendth - 70 mm, Pin Size - 4 mm dia, 70mm lendth

• Safe For Kids
• Made of fine quality Material
• stacking toy
• educational toys

• FINE WELDING: High frequency welding technology, the welding opening is very firm, with precise joint, internal and external welding without gaps
• CARBIDE MATERIAL: The hole saw is forged with cemented carbide, quenched at high temperature, with high hardness and strong impact resistance
• WIDE APPLICATION: Widely used for drilling holes in concrete, bricks, wall and stone, cutting and cleaning holes when installing air conditioners, etc
• STANDARD SIZE: The hollow drill reamer has standard hole diameter and mounting hole size, with easy installation, stable operation and high accuracy
• HIGH EFFICIENCY: The carbide hole saw has a incisive edge, hard and wear resistant, not easy to break when cutting, and has a fast drilling speed

• FINE WELDING: High frequency welding technology, the welding opening is very firm, with precise joint, internal and external welding without gaps
• CARBIDE MATERIAL: The hole saw is forged with cemented carbide, quenched at high temperature, with high hardness and strong impact resistance
• WIDE APPLICATION: Widely used for drilling holes in concrete, bricks, wall and stone, cutting and cleaning holes when installing air conditioners, etc
• STANDARD SIZE: The hollow drill reamer has standard hole diameter and mounting hole size, with easy installation, stable operation and high accuracy
• HIGH EFFICIENCY: The carbide hole saw has a incisive edge, hard and wear resistant, not easy to break when cutting, and has a fast drilling speed

• SPIN MOP brings you a unique designed compact and versatile mop set, featured with wheels attached at the bottom of the bucket making it easy to carry around the house. The attached wringer help to dry the mop faster, and the built in spin agitator loosens the debris and dirt from the mop head during rinsing, keeping the dirt in the bucket & off the floor.
• NO MORE PAIN IN CLEANING: Replaceable Handle Can Be Extended Up to 115cm, Eliminating The Pain Of Bending While Cleaning And It Comes With Swivel and Replaceable Head Which Can Bend Till 180 Degree, Helping You To Clean The Difficult Parts Of The House
• SUPER ABSORBENT REFILLS: brings you additional mop refills made of pure cotton threads, making it 10 times more absorbent than the traditional mops and helping to remove the most difficult stains
• FOR ALL TYPE OF FLOORS: The Mop Refill is made up of pure cotton threads, ten times more absorbent than the traditional mops, and can be used in all types of floors like tiles, slate, linoleum and wooden floor.
• GET THE BEST MOP DEALS

• As shown in picture
• is_customized: Yes, Brand Name: FUDO, Material: Tungsten Carbide, length: 150mm, Use: ry Drilling
• DIY Supplies: Tiling, Model Number: VD-EH7DB150, Type: Core Drill Bit, ITEM: SDS PLUS 4 HOLLOW HAMMER DRILL BITS, Size: 7*150mm, Qty: 1pc
• 1X Generic 7*150mm Solid alloy Tip SDS Plus Round Shank 4 hollow Hammer Drill Bit for concrete/brick/wall/tile/marble/granite

• D-Hook Set consists of 1 Pc. of D-Hook & 2 Pcs. of heavy duty Fasteners (M10x75mm). Specially designed to hang Ceiling Fans, Jhoomer, Baby Swings, Ropes, etc.
• Home & Industrial Use. Safe load: Pull out load is 75 Kgs and Jurk/Vibration load is 40 Kgs.
• Need to use 10 mm diameter drill bit for drilling holes on ceiling or wall to fix Fastener. The drilling depth should be greater than or equal to 65 mm. Fastener outer diameter approx 10 mm.
• Package Content- 1 Set of D-Hook with 2 Complete Fasteners.

• Eco-Friendly and Reusable: Crafted from natural clay, our miniature terracotta bricks are eco-friendly and can be reused, making them a sustainable choice for your projects.
• Versatile Applications: These DIY terracotta bricks are suitable for a wide range of projects, including dollhouses, dioramas, scale-models, and school projects, allowing you to explore your creativity and bring your ideas to life.
• Educational and Fun: Encourage creativity and hands-on learning in children above 5 years. Our bricks provide an excellent opportunity for kids to engage in school projects and develop their architectural and design skills.
• 1:8 Scale for Easy Building: Designed in a scale of 1:8, our terracotta bricks are easy to handle for both kids and adults. They enable precise construction and help create realistic miniature models.
• Handmade Quality: Each brick is meticulously handcrafted with care, ensuring consistent quality and authenticity. The natural clay material adds a touch of realism to your miniature creations, enhancing their aesthetic appeal.

• New in Box
• 100% Brand New
• Good Quality Durable and Eco Friendly Material.
• Package Contain Pack Of 1 Item.
• In case of any query please contact seller.