Electrical - Meter By Generic

• Type: Static Sub Meter Single phase, 2 wire Digital Dispaly
• Poly-carbonate Strong Body
• Low power consumption
• Applications: Residential,Industrial and Commercial Complexes etc.

• Type: Static Sub Meter Single phase, 2 wire Digital Dispaly
• Poly-carbonate Strong Body
• Low power consumption
• Applications: Residential,Industrial and Commercial Complexes etc.

• Plastic
• White
• Package contents: 1 Single phase 2 wire electrical energy KWH meter

• L&T offers unique single phase meter designed for the DT (Distribution Transformer) metering application with higher accuracy and better features.

• May select 5+1LCD digits display (99999.1kWh)
• Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993
• 35mm standard DIN rail installation, complying with standard DIN EN50022
• Standard configuration short terminals cover, may select extension terminals cover, in order to protect to use safely
• Single direction measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21

• 35mm DIN Rail mounting meets the standards of DIN EN50022.Large scale integrated circuits and precision SMT technology, with good electromagnetic interference resistance and stable performance
• 17.5mm pole width meets the standards of DIN43880.Embedded end cover, ensuring power supply safety
• LCD digital display, no reset button, to avoid human manipulation with the data
• It displays electricity, voltage, current, frequency and power.Adopt microelectronics and digital processing technology to measure electric energy, accurate and reliable
• Red LED energy pulse signal.With the features of good reliability, small size, light weight, beautiful appearance and easy installation

• Dedicated large-scale integrated circuits and SMT technologies for metering electrical energy to ensure metering accuracy and reliability
• Single-phase electronic energy meter is used to measure single-phase AC active energy with rated frequency of 50Hz and rated voltage of 220V
• Good reliability, small size, light weight, beautiful appearance and advanced technology
• 5+1 digit wide temperature LCD display, clear numerical display, easy reading
• 35mm standard rail mounting method, easy to install

• Digital display electric energy meter with LCD display, which can be displayed directly
• Adopt 35mm DIN rail installation, wiring mode is UP?OUT and DOWN?IN/UP?IN and DOWN?OUT
• Electronic metering, high accuracy, small error, no need to adjust for long?term use
• Multi?purpose, support to display power, voltage, current, frequency, power factor
• Large?scale integrated circuit and precise SMT technology, strong anti?electromagnetic interference ability

• The meter is fully in conformity with the relevant technical requirements of GB/T17215.321-2008 national standard and the IEC62053 international standard of grade 1 or level 2 single-phase energy meter, which can directly and accurately measure active en
• LCD display is 7+1 or6+1meter shows the total power consumption
• It features high reliability, small volume, light weight, beautiful appearance, advanced technology, and 35mmDIN standard guide rail installation, etc
• It has good anti-electromagnetic interference, low power consumption, high precision, high overload, high stability, anti electricity-stolen and long life
• This table is suitable for the measurement of rated frequency 50 Hz or 60 Hz single-phase ac active electricity, used for fixed installation indoors, apply to the environment temperature is -25 ? ~ 55 ?, relative humidity is ? 95%, and in the air does no

• The short terminal cover is made with the transparent PC, to reduce the installation space and is convenient for centralized installation
• Equipped with a polarity passive energy impulse output terminal, conforming to Standards IEC 62053-31 and DIN 43864
• Can select the step motor impulse register of 5+1 digits (99999.1kWh)
• Bipolar width, complying with standard DIN43880
• 35mm DIN standard rail mounted, conforming to Standards DIN EN 50022

• ?LCD display is 7+1 or6+1meter shows the total power consumption
• ?It features high reliability, small volume, light weight, beautiful appearance, advanced technology, and 35mmDIN standard guide rail installation, etc
• ?It has good anti-electromagnetic interference, low power consumption, high precision, high overload, high stability, anti electricity-stolen and long life
• ?This table is suitable for the measurement of rated frequency 50 Hz or 60 Hz single-phase ac active electricity, used for fixed installation indoors, apply to the environment temperature is -25 ? ~ 55 ?, relative humidity is ? 95%, and in the air does not contain corrosive gases and avoid dust, mold, salt fog, condensation, insects, etc
• ?The meter has photoelectric coupling type electric pulse test output port, located in terminal button box (as shown in figure 2), + 5 VDC of the test equipment connected to 20" + "terminal, signal S connected to 21"-" terminal

• This meter is suitable for the measurement of rated frequency 50 Hz single-phase ac active electricity, used for fixed installation indoors, apply to the environment temperature is -25 ? ~ 55 ?, relative humidity is ? 95%, and in the air does not con
• It features high reliability, small volume, light weight, beautiful appearance, advanced technology, and 35mmDIN standard guide rail installation, etc
• It has good anti-electromagnetic interference, low power consumption, high precision, high overload, high stability, anti electricity-stolen and long life
• The meter is fully in conformity with the relevant technical requirements of GB/T17215.321-2008 national standard and the IEC62053 international standard of grade 1 or level 2 single-phase energy meter, which can directly and accurately measure active en
• LCD display is 6+1 meter shows the total power consumption

• Equipped with a polarity passive energy impulse output terminal, conforming to Standards IEC 62053-31 and DIN 43864
• Can select the step motor impulse register of 5+1 digits (99999.1kWh)
• Bipolar width, complying with standard DIN43880
• The short terminal cover is made with the transparent PC, to reduce the installation space and is convenient for centralized installation
• 35mm DIN standard rail mounted, conforming to Standards DIN EN 50022

• Dedicated large-scale integrated circuits and SMT technologies for metering electrical energy to ensure metering accuracy and reliability
• 5+1 digit wide temperature LCD display, clear numerical display, easy reading
• Single-phase electronic energy meter is used to measure single-phase AC active energy with rated frequency of 50Hz and rated voltage of 220V
• Good reliability, small size, light weight, beautiful appearance and advanced technology
• 35mm standard rail mounting method, easy to install

• Large?scale integrated circuit and precise SMT technology, strong anti?electromagnetic interference ability
• Multi?purpose, support to display power, voltage, current, frequency, power factor
• Adopt 35mm DIN rail installation, wiring mode is UP?OUT and DOWN?IN/UP?IN and DOWN?OUT
• Electronic metering, high accuracy, small error, no need to adjust for long?term use
• Digital display electric energy meter with LCD display, which can be displayed directly

• 5+1 digit wide temperature LCD display, clear numerical display, easy reading
• Dedicated large-scale integrated circuits and SMT technologies for metering electrical energy to ensure metering accuracy and reliability
• Single-phase electronic energy meter is used to measure single-phase AC active energy with rated frequency of 50Hz and rated voltage of 220V
• Good reliability, small size, light weight, beautiful appearance and advanced technology
• 35mm standard rail mounting method, easy to install