Electricals - Energy Meters Products

• 6 in 1 MultimeterOne interface displays 6 kinds of parameters at the same time. Voltage measuring range: AC 40-300V, Current measuring range: 0-100A, Active power: 0-30000W, Electric energy: 0-99999kWh, Frequency: 45-65Hz, Power factor: 0.00-1.00PF.
• Data Storage Function1. when power off, the electric energy data will be stored and memorized, when the power is reconnected, this watt meter will go on cumulating data. 2. Data reset for multiple measurement needs. Press the reset button for five seconds, the kwh usage meter will be reseted.
• Safe and High PrecisionThis single phase power consumption meter features high quality ABS flame resistant material and percision chip, making it safe to use. Real-time monitoring of household electricity consumption, helping you lower power consumption and save money.
• Better Visual ExperienceColorful LCD HD display, 178 degree viewing without dead angle, with backlight function, this ac power meter single phase is clearly visible whatever day or night.
• Wide ApplicationThis electricity usage monitor is easy to install and widely used in school, market, home, industry, laboratory, etc. Notes: This energy meter can be used to measure non-standard sine wave from inverter.

• High quality three-wire 4-30V DC voltmeter, practical and durable.
• Move the decimal point automatically.
• 0.36inch digital LED display, convenient to read data.
• High precision, reverse protection.
• Sealed plastic waterproof shell with folding design, durable and convenient.

• Over current protection, over voltage protection, under voltage protection can disable one , two or three of them. This device have lightning protection built IN.
• Adjustable to connect manually and automatically reconnect. Or Can be used as a normal ON/OFF switch
• Can be used as a cycle switch. Remarks The product does not have a battery. If the external power supply is out of power, the cycle time starts from 0.
• Built -in Electricity metering, accuracy Class 1 (Active energy display range 0~9999.9 kWh
• Can set the delay on and delay off time

• 0.36inch digital LED display, convenient to read data.
• High precision, reverse protection.
• High quality three-wire 4-30V DC voltmeter, practical and durable.
• Sealed plastic waterproof shell with folding design, durable and convenient.
• Move the decimal point automatically.

• Battery Capacity Meter is suitable for 10-100V (12V 24V 36V 48V 60V 72V) Lithium Battery, Lead Acid Battery, Lithium Iron Phosphate Battery, etc.
• The default setting is suitable for use in 12V lead acid batteries. To set up other types of batteries, or go into settings mode and select the appropriate battery type.
• The battery indicator can display battery capacity, voltage and Celsius/Fahrenheit temperature at the same time.
• Battery percentage will always be 100% when the battery is in charging mode. Actual value will be visible when not in charging mode
• Note: Read description carefully before using, as the device needs to be configured first.

• 0.36inch digital LED display, convenient to read data.
• High precision, reverse protection.
• High quality three-wire 4-30V DC voltmeter, practical and durable.
• Sealed plastic waterproof shell with folding design, durable and convenient.
• Move the decimal point automatically.

• New generation Handy size feature packed Digital Multimeter True RMS 600 mV to 600V AC DC 600 ?A to 10A AC DC Ergonomic design
• 6000 counts HD Display with backlight, Relative measurement, NCV, Flashlight, Overload protection, Shockproof design
• Frequency measurement in ACV range, High Accuracy and Stability Overload protection protects the instruments from surge, spikes, high voltage, etc
• Capacitance 10 nF to 2 mF, Temperature - 20 degree C ~ 1000 degree C Resistance 600 ? to 60 M ?
• Data hold, Auto power off

• Requirement: - If you have a 3-phase connection than this device can be of use with 3-phase over and under voltage and over current protection along with real time voltage and current monitoring.
• Adjustable Nature: -Ths device comes with the provision of setting default protection value as per your requirement.
• Quick Response: - With 0.1s cut off time, you can set the response time ranging 0.1~30sec
• Phase Loss Protection: - This feature is a must if this device is used for industrial purpose where all phase presence is required. In case of even one phase lost the device will cut off the power supply.
• Phase Imbalance Protection: - In case of difference between 3-phase voltage, the device will cut off. You can adjust this as per your need and requirement ranging 20~99V

• LCD display:?equipped with a LCD screen displaying?digital readings, which is easy to read.
• Auto loop display four data: the readings of energy consumption, voltage, current and power will be automatically switched in the screen, each one stays for 6 seconds.
• Quality material and high accuracy: retardant housing to ensure safety, SMT chip technology integrated circuit provides accurate measurement, excellent conductivity, corrosion resistance, and stable performance.
• Compact and user-friendly: 35mm rail for installation, and can be directly installed in the electric box, occupying only 2P position.
• ???

• Accurate energy measurement even in case of phase reversal and/or the load is earthed.
• Package Contents : 1 Energy Meter.
• Reverse current & earth load tampering protection
• Accurate energy measurement even in case of phase reversal and/or the load is earthed.
• Install on Individual machine.

• High Accuracy: This din rail energy meter uses high accuracy sensors and digital displays, which provide high accuracy and low error in display results.
• Wide Application: This din rail energy meter can be widely used in all kinds of commercial and industrial electricity scenarios, such as factories, shopping malls, supermarkets, office buildings, rural electricity supply, public facilities, production workshops, etc.
• 35mm DIN Rail Mounted: This DIN rail meter uses a one way, two wire connection and is mounted on a 35mm rail for accuracy up to Class 1.
• LCD Display: The rail energy meter has a 5 and 2 or 6 and 1 digit LCD display for accurate measurement of active power, meter address, baud rate, constant and validation bits can be modified.
• Multiple Features: The din rail energy meter has RS485 remote meter reading function and has the following features, i.e. the meter can be powered off, can be backlit, with switch output, can display total power, current, voltage, power, power factor, frequency, CTC, which can accurately measure active energy, multiple functions in one.

• Standard configuration 5+1(99999.1KWh) digital display
• The standard configuration pulse output is passive (polar) and the remote pulse output can be selected as passive (non-polar). It is easy to contact with various AMR systems and conforms to the standards IEC 62053-31 and DIN43864
• Small size, light weight, good reliability and easy installation
• Six widths (12.5mm modulus) in accordance with DIN43880
• 35mm standard DIN-rail mounting in accordance with standard DIN EN50022

• You will get report, ppt, circuit diagram, block diagram, program code, audio video call support. & It is engineering project & diploma project
• Effectively record the units consumed for billing purpose
• This is multipurpose project that integrated all function including prepaid billing
• Bill message is sent to phone no. that auto saved by giving missed call
• Microcontroller is used, This project uses an 8051 microcontroller to which a GSM modem is interfaced .