Electricals - Energy Meters Products

• Light weight counter meter keeps excellent long term reliability with perfect appearance and easy installation, etc.
• DTS1891 three phase electronic DIN rail active energy meter adopts new type of microelectronics technology, imported large scale integrated circuits, advanced technology using digital technology and SMT technology, etc.
• Insulation performance keeps that AC voltage 4kv for 1 minute, 1.2 / 50us waveform pulse voltage of 6kv.
• Completely in line with the relevant technical requirements of the class 1 active energy meter specified by the international standard IEC62053 21.
• Rail energy meter keeps ability to directly and accurately measure the active power consumption of the load in AC network with a rated frequency of 50 Hz.

• Multi-function digital meter can measure and display 6 parameters, inclug AC voltage, AC current, power, frequency, electric energy and power factor at the same time.
• With power-down memory function: When the meter is powered off during use, the meters accumulated power value will be stored automatically (the previous data will not be lost).
• Equipped with a LCD HD display, which is clear and easy to read.
• There's a reset button on the right side of the display which can reset the accumulated values to zero if pressed and held for 5 seconds.
• One digital meter to monitor household power consumption in real time.

• Bipolar width, complying with standard DIN43880
• Equipped with a polarity passive energy impulse output terminal, conforming to Standards IEC 62053-31 and DIN 43864
• The short terminal cover is made with the transparent PC, to reduce the installation space and is convenient for centralized installation
• Can select the step motor impulse register of 5+1 digits (99999.1kWh)
• 35mm DIN standard rail mounted, conforming to Standards DIN EN 50022

• Possess features of excellent long term reliability, small size and light weight, perfect appearance and easy installation, etc.
• Directly measure the 50Hz or 60Hz active energy of single phase AC power grid, and can pass through the stepper motor type pulse register
• This new type single phase two wire active energy meter uses microelectronics technology, introduces large scale integrated circuits, and adopts advanced digital technology and SMT technology
• When the meter starts to measure, the pulse indicator flashes, which can provide accurate and direct measurement
• This multi function energy meter possess 2P large and LCD backlight screen, which make you to read clearly

• New in Box
• Good Quality Durable and Eco Friendly Material.
• This Product comes in a proper Packaging.
• Delivery within 3-5 weeks.
• In case of any query please contact seller.

• Made of fine quality ABS material, impact resistance, heat-resistant, cold-resistant, and with fine insulating effect.
• Calculate total consumption, real-time view of power consumption via mobile phone.
• LCD display, real-time display voltage, current, power, total energy kWh.
• This metering switch can set 30 kinds of time models, also has time delay function.
• Mini and compact design, saving installation space and making the installation more beautiful.

• 1. Accuracy: 1% 2. Range: AC voltage: AC 80-300V AC current: AC 0-99.99A, minimum resolution is 0.01A.Display 100.0A when the current is over 100A Active power: 0-45000W. resolution is 0.1W (< 0-9999.9W ), otherwise Minimum resolution is 1W.
• Electric energy: 0-9999999Kwh 0-9999.999kwh minimum resolution is 0.001kwh 10000.00-99999.99kwh minimum resolution is 0.01kwh 100000.0-999999.9kwh minimum resolution is 0.1kwh The rest minimum resolution is 1Kwh. 3. Speed: 2 times per second 4. Size: 79x43x48mm 5. Installation Size: 76*39mm 6. Auto-saving: When power off, the electric energy will be saved. The saved electric energy will be accumulated continued when the meter power-on next time. "
• "1. The voltage input will connect to green terminal and the current transformer will connect to blue terminal. block can not be connected incorrectly, otherwise the instrument will be damaged! ! ! 2. This instrument is only suitable for pure AC 50-60HZ mains power supply, can not be used for square wave, inverter output and modified wave circuit measurement, otherwise the instrument will be damaged! ! !
• 3. During the process of installing the instrument, remember not to squeeze the LCD screen of the instrument, otherwise garbled/broken code will occur! !! 4. Many buyers responded: How is the data I tested wrong, voltage * current = power, the actual test power is less than the voltage * current, why?
• A: there are three types of power: active power (P for / unit W), reactive power (Q for / unit Var), and apparent power (S for / Unit VA). Here only the active power,The calculation formula of active power is: P=U*I*cos?, cos? represents power factor, and the power factor of pure resistive load is generally close to 1, and the inductive and capacitive load load power factor is Between 0-1; the power factor of each appliance is different.

• Type of Product: Static Sub Energy Meter 3 Phase With Counter Display ( 10-60 Amp)
• Applications: Residential,Industrial and Commercial Complexes etc. LT Network
• Accuracy Class: 1 Meter? AiO
• Power Supply: 3x10-60Amp Voltage 3x240V Frequency: 50 Hz
• Power Supply: 3x10-60Amp Voltage 3x240V Frequency: 50 Hz

• Kindly refer the product description before buying the product.
• Please allow a little size & color error due to manual measurement
• Colour as per description
• Purchase with confidence! Every order includes items that are carefully hand packaged and sealed in a box.
• If you are not happy with your order, contact us and we'll make it right!

• New in box
• Quality Product
• 100% Brand New
• Durable and Eco-friendly Material.
• In case of any query please contact seller.

• Material : ABS
• Weight : 410 Grams
• Dimension : 96x96x54(HxWxD)mm
• Purpose :Power Distribution Panels;Extrusion Machinery;Motor Control Panel;Power Control Panel
• 1 year from Invoice date

• 35mm DIN Rail mounting meets the standards of DIN EN50022
• 17.5mm pole width meets the standards of DIN43880
• Red LED energy pulse signal
• It displays electricity, voltage, current, frequency and power
• LCD digital display, no reset button, to avoid human manipulation with the data

• 3-phase 4-wire energy meter with high accuracy is designed for the measurement of rated frequency 50 or 60Hz single-phase AC active electricity.
• High-quality flame retardant ABS case, with good impact resistance, heat/ cold resistance, insulativity and durability.
• With 6+2 digits backlight LCD display, the meter accurately counts and clearly displays the energy consumption.
• Adopts 35mm DIN standard guide rail installation, compact size and light weight make installation easier.
• Pure copper wiring terminal with excellent conductivity and corrosion resistance can ensure large current during long-time performance.