Exhaust Fans By Vent Systems

• Diameter for 4" Inch Opening - Outer diameter is 5" - Ideal for room exhaust and intake ventilation use.
• Home improvement - For Intake or extraction use, for outside or inside, for walls or ceilings, great for garages, sheds, offices, bathroom, RVs or campers, and anywhere else air is desired to travel through
• Premium material: Louvre air vents are made of new high quality ABS plastic, environment friendly and non-toxic. Built-in fly screen mesh.
• Easy Installation - available for wall mounting or ceiling mounting. May be conneted to dryer vent or any other VENT SYSTEMS HVAC part
• Great and beautiful design. Reduce dust into kitchen or bathroom by fly screen mesh.

• Diameter for 4" Inch Opening - Outer diameter is 5" - Ideal for room exhaust and intake ventilation use.
• Premium material: Louvre air vents are made of new high quality ABS plastic, environment friendly and non-toxic. Built-in fly screen mesh.
• Easy Installation - available for wall mounting or ceiling mounting. May be conneted to dryer vent or any other VENT SYSTEMS HVAC part
• Home improvement - For Intake or extraction use, for outside or inside, for walls or ceilings, great for garages, sheds, offices, bathroom, RVs or campers, and anywhere else air is desired to travel through
• Great and beautiful design. Reduce dust into kitchen or bathroom by fly screen mesh.

• Round ventillation grille, made of high quality galvanised steel and coated with a durable epoxy finish. No screws included.
• The installed nylon mesh protects the ventilation ducts against insects.
• Great and beautiful design. Easy Installation - available for wall mounting or ceiling mounting.
• Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability.

• Home improvement - For Intake or extraction use, for outside or inside, for walls or ceilings, great for garages, sheds, offices, bathroom, RVs or campers, and anywhere else air is desired to travel through
• Premium material: Louvre air vents are made of new high quality non-rusty metal, environment friendly and non-toxic. Built-in fly screen mesh.
• Easy Installation - available for wall mounting or ceiling mounting. May be conneted to dryer vent or any other VENT SYSTEMS HVAC part
• Diameter for 9.8" Inch Opening - Outer diameter is 10.6" - Ideal for room exhaust and intake ventilation use.
• Great and beautiful design. Reduce dust into kitchen or bathroom by fly screen mesh.

• Made of High Quality ABS Plastic and perfectly designed for DIY and Trade
• In-line Duct Connector - Easily fit with different 4" inch plastic or flexible pipes for HVAC.
• Easy to install - Push-fit chosen flexible or straight plastic duct on the coupler and fix with steel clamps or reinforced alu-tape.
• Perfectly suited Duct Flange to Connect your Extractor Fan, Bathroom fan, Kitchen exhaust Fan, In-line Extract fan and Cooker hood or any other indoor outdoor heating cooling pipe.
• Vent Systems 4 inch (100mm) products are made to be used for home improvement, office improvement. They are portable, high quality and long durability.

• Duct Connector Flange with rubber gasket - Easily fit with different 10" inch plastic pipes for HVAC
• Easy to install - pre-bore holes to ensure easy and secure mounting to wall, ceiling or any other surface.
• Made of High Quality Metal and perfectly designed for DIY and Trade
• Perfectly suited Duct Flange to Connect your Extractor Fan, Bathroom fan, Kitchen exhaust Fan, In-line Extract fan and Cooker hood or any other indoor outdoor heating cooling pipe
• Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability.

• SPECIFICATION: Flat air vent cover is designed to cover a 3.93" x 3.58" Inch hole. Please note that it cannot be attached to a round vent. Outside dimensions of the cover are 5.83" x 6.02" Inches.
• INSTALLATION: Screw holes are pre-drilled. You can install without professional tools or assistance, installation process takes just a few minutes, easy to open, good ventilation, maximum exhaust airflow. Product can only be surface mounted. Dimensions between the screw holes: 4.37 x 3.74 Inches. No screws included.
• REMOVABLE SCREEN eases installation and cleaning process. Screen is designed to prevent wind, rain, snow, even birds and other external creature from entering your ventilation system.
• PERFORMANCE & FEATURES: High quality ABS plastic body and durable structure. Curved louvers, adding a beautiful design; adding UV inhibitors to the cover to prevent sun damage and cracking, Suitable for dryer or bathroom fan venting.
• Our aim is to provide the most suitable product and the best service. Good product, first choice for purchase, just for your peace of mind, comfortable and beautiful life

• Back draft damper for insertion into 8 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct
• A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel
• Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial HVAC applications. Best to use with VENT SYSTEMS hvac parts.
• Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no cold air / wind or smell can penetrate the ventilation pipe from the outside.
• The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.

• Metal Round Roof Cap Prevents Odors And Gasses From Invading Rv Living Space
• Designed With No Moving Parts Ensuring Longer Product Life-Time
• Usable Such As Roof Rain Cap, Roof Vent, Stove Pipe Cap, Air Exhaust. Prevents From Rain And Wind
• Made Of High Quality Galvanized Steel With Rubber Around The Pipe For Better Insulation.
• Easy to use, install, remove and clean. Suits very good with other Vent Systems HVAC products. Great outdoor Home improvement and DIY product.

• Back draft damper for insertion into 4 inch ventilation ducts. The backflow damper opens and closes automatically.
• Easy DIY. Designed to provide anti back draught, and fit in between Solid Plastic Ducting, Flexible Ducting.
• Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial HVAC applications. Best to use with VENT SYSTEMS hvac parts.
• Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no cold air / wind or smell can penetrate the ventilation pipe from the outside.
• The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.

• Made of High Quality Metal and perfectly designed for DIY and Trade
• Duct Connector Flange - Easily fit with different 4" inch plastic pipes for HVAC
• Easy to install - pre-bored holes to ensure easy and secure mounting to wall, ceiling or any other surface
• Perfectly suited Duct Flange to Connect your Extractor Fan, Bathroom fan, Kitchen exhaust Fan, In-line Extract fan and Cooker hood or any other indoor outdoor heating cooling pipe
• Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability.

• Metal Round Roof Cap Prevents Odors And Gasses From Invading Rv Living Space
• Designed With No Moving Parts Ensuring Longer Product Life-Time
• Usable Such As Roof Rain Cap, Roof Vent, Stove Pipe Cap, Air Exhaust. Prevents From Rain And Wind
• Made Of High Quality Galvanized Steel With Rubber Around The Pipe For Better Insulation.
• Easy to use, install, remove and clean. Suits very good with other Vent Systems HVAC products. Great outdoor Home improvement and DIY product.

• INSTALLATION: You can install without professional tools or professional assistance, install in just a few minutes, easy to open, good ventilation, maximum exhaust
• FEATURES: Curved louvers, adding a beautiful design; adding UV inhibitors to the cover to prevent sun damage and cracking, Suitable for dryer or bathroom fan venting
• Can Be Used As A Grill Cover, Outlet Cover And Air Vent Deflector. Perfect For Home Improvement
• PERFORMANCE: High quality ABS plastic body and durable structure to prevent wind, rain, snow, even birds and other external creature from entering the outdoor dryer vents
• Our aim is to provide the most suitable product and the best service. Good product, first choice for purchase, just for your peace of mind, comfortable and beautiful life

• Made of High Quality ABS Plastic and perfectly designed for DIY and Trade
• Duct Connector Flange - Easily fit with different 4" inch plastic pipes for HVAC and Home Improvement
• Easy to install - pre-bored holes to ensure easy and secure mounting to wall, ceiling or any other surface
• Perfectly suited Duct Flange to Connect your Extractor Fan, Bathroom fan, Kitchen exhaust Fan, In-line Extract fan and Cooker hood or any other indoor outdoor heating cooling pipe
• Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability.

• INSTALLATION: You can install without professional tools or professional assistance, install in just a few minutes, easy to open, good ventilation, maximum exhaust
• FEATURES: Curved louvers, adding a beautiful design; adding UV inhibitors to the cover to prevent sun damage and cracking, Suitable for dryer or bathroom fan venting
• Can Be Used As A Grill Cover, Outlet Cover And Air Vent Deflector. Perfect For Home Improvement
• PERFORMANCE: High quality ABS plastic body and durable structure to prevent wind, rain, snow, even birds and other external creature from entering the outdoor dryer vents
• Our aim is to provide the most suitable product and the best service. Good product, first choice for purchase, just for your peace of mind, comfortable and beautiful life

• Back draft damper for insertion into 6 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct
• A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel
• Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial HVAC applications. Best to use with VENT SYSTEMS hvac parts.
• Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no cold air / wind or smell can penetrate the ventilation pipe from the outside.
• The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.