Aluminium - Aluminium Fabricators Products

• LED Aux Light made from the good quality material that makes product durable.
• Brighter than 55 watt regular halogen headlight, but only uses 12 watts.
• High power Fog Lamp Light 20W 3200LM Cree Led Projector LED Aux Lights. Operating Voltage: 10- 30V DC LED Power: 20W Lumens: 3200Lm Waterproof rate: IP 67.
• Shock-proof, Waterproof and anti-corrosion, it can be used in the rain or harsh environments.

• 9V-75V DC wide voltage range for Ordinary vehicles: truck, buses,off-road vehicles, agricultural machine,excavator,bulldozer engineering vehicle,feller,rollers,loaders,mining vehicle,crane,forklift Mahindra Boat(others are 10-30v)
• High energy efficiency, stability30,000+hours life,waterproof IP67
• Mounting Bracket: Stainless Steel ,Up to 30,000 Life Operation LED light output 6000K.
• Product Group: Automotive,Product Type: Bulbs,48W (16 LED),Long lasting.

• Opening Size: 130.81 x 66.04 x 101.6 cm / Closing Size: 10.16 x 66.04 x 104.14 cm
• Material: Stainless Steel + ABS Plastic
• Folds down flat to conserve space. Sleek design allows it to tuck away between the washer and dryer, under the bed, or in the closet
• With a large drying surface, hang dry clothes over the horizontal spanning rods Perfect for the delicate garments that cant be tossed in the dryer
• Comes fully assembled. Can be set up and folded in seconds. Takes very less space after you fold it.

• Foldable Hanging Frames Different Combinations. Example - Fold The Middle Frame If You Need To Dry A Bedsheet On The Top Frame As It Requires More Space For Hanging.
• Material: PVC-Coated Metal + ABS Plastic
• Designed for use in all climates and weather conditions.Adjustable hanger holders on the outer frame allow you to hang additional clothes on hangers along the sides of the stand, enabling you to maximise drying area even further
• The ergonomic modular design features four drying levels to ensure maximum drying area while occupying minimum space. The entire body can be disassembled into a compact version of itself for easy storage when not in use
• 6 Hanging Frames (3 On Each Side Of The Rack). 4 Rails On Each Frame For Drying Lots Of Clothes At Once. Size: (75-126) X 64 X 170 Cm

• ALUMINIUM housing for strength and durability upgraded lens surface with high light transmission, ip67 rated waterproof, dustproof and shockproof, heavy-duty and anti-corrosive, ideal for either indoor or outdoor use.
• ALUMINIUM alloy heat sinks effectively extend the lifespan of the light bar to over 50, 000 hours, lighting the entire forward viewing area, which will give you comfortable and safe driving entertainment.
• Bright and white light: superior-quality led chips, super bright ray to light up the forward dark road, low power consumption, high-quality led chips emit bright and focused light, further illumination range, dispel darkness.

• Scale manufactured of stainless steel
• Marking edge with metric graduations.
• The tool can be used for a variety of marking out jobs from simply running a pencil line down the edge of a board to precisely gauging the length of tenons, the transferring of widths and any repetitive marking or laying out operation.
• Ideal woodworking tool can be used for a variety of marking out jobs

• ALUMINIUM housing
• ALUMINIUM housing and polycarbonate lens, ribbed design for efficient cooling, great strength and lightweight

• ?? Made of durable yet lightweight steel ,that is easy to move from room to room.
• ?? Material: PVC-Coated Steel + ABS Plastic
• ?? Features a top shelf for sweaters or other flat-drying items, SUITABLE FOR SMALL FAMILY
• ?? Collapsible clothing drying rack made of big diameter steel tube and premium ABS plastic,Perfect to organize your towels, skirts, shirts,children's clothing and contributes long service time.
• ?? This is a Trademark brand which is committed to provide high-end products globally. We promise to provide 100% satisfaction service to all customer.

• ALUMINIUM housing with PMMA lens angel eyes light to style your motorcycle whilst illuminating the road ahead for better visibility IP67 grade water resistance head light with high beam, low beam and blasting flash.
• EXTREMELY BRIGHT LIGHT FOR IMPROVED VISIBILITY: Perfect to illuminate during night as well as in the bad weather. It is designed with 3000lm flux for ease in illuminating the 200 meters distance.
• THREE WIRE CONNECTIONS FOR LIGHT MODE CONTROL: Connect the red wire with positive pole, black wire with negative pole, and the yellow wire with the positive pole. Angel Eyes will be connected with Demon Eyes by connecting the black and yellow wire. Connect the red and black wire to illuminate the Main Light. Further, the flashing of main light can be achieved by connecting the red and black wire. The yellow wire is for the halogen light and the red is for the main light.
• WATERPROOF MATERIAL FOR EXTENDED LIFE: Made to enhance visibility, the offered led mirror mount fog light is designed to withstand all adverse conditions like water, bad weather, and shocks. Being durable and sturdy, this headlight is ideal to install for excellent visibility during the night, rainy season and even in low lighting foggy weather.
• QUICK AND EASY INSTALLATION: Unique 3 mode easy connection design for quick installation with the existing battery of the motorcycle. Halogen wire will be connected for on state all the time the angel eye can be illuminated by switching off and on. It is universally fit for all make and models of motorcycle, cars, ATV, bike, etc.

• 100% brand new and high-quality.
• It is suitable for the ruler of width 0-30mm and thickness 0-3.5mm.
• Easy to make a ruler into a parallel line scribe ruler with ruler locator.
• We adopts premium aluminum alloy to make the ruler block gauge.
• It is small,convenient and portable,you can carry it anywhere with yourself.

• ALUMINIUM HEATSINK: Since it produces a lot of heat due to original 18W power output, it is made of full aluminum metal housing heatsink in black paint to ensure quick heat dissipation and longer service life. Besides, stainless steel mounting bracket and shatterproof lenses with IP67 water resistant to withstand any harsh condition.
• SPOT + FLOOD BEAM COMBO: Its specially designed lens features spot and 120 degree flood beam pattern to elongate fields of view in the dark and give brighter light to ensure safety. It uses the latest LED technology to product 18W superior light output and will not drain your battery.
• ASSORTED APPLICATION USES: The offered LED Fog Light is compatible with 12-80V battery, making it ideal for installation on Motorcycles, Cars, Jeeps, 4x4, Trucks, Tractors, Trailers, Pickups, SUVs, ATVs & boats. Also, it will not drain your battery during the ride.
• EASY INSTALLATION: It can be easily installed on fog light bar or other surfaces of the vehicle if you are a little handy with tools. Supplied with adjustable mounting accessories, this 18W LED Light can be adjusted to about 45 degrees for changing the direction of the light beam easily.

• ALUMINIUM HEAT SINK: Since it produces a lot of heat due to original 18W power output, it is made of full aluminium metal housing heat sink in black paint to ensure quick heat dissipation and longer service life. Besides, stainless steel mounting bracket and shatterproof lenses with IP67 water resistant to withstand any harsh condition.
• SPOT + FLOOD BEAM COMBO: Its specially designed lens features spot and 120 degree flood beam pattern to elongate fields of view in the dark and give brighter light to ensure safety. It uses the latest LED technology to product 18W superior light output and will not drain your battery.
• ASSORTED APPLICATION USES: The offered LED Fog Light is compatible with 12-80V battery, making it ideal for installation on Motorcycles, Cars, Jeeps, 4x4, Trucks, Tractors, Trailers, Pickups, SUVs, ATVs & boats. Also, it will not drain your battery during the ride.
• EASY INSTALLATION: It can be easily installed on fog light bar or other surfaces of the vehicle if you are a little handy with tools. Supplied with adjustable mounting accessories, this 18W LED Light can be adjusted to about 45 degrees for changing the direction of the light beam easily.

• Waterproof
• No Strain on battery
• High Intensity

• 6 pc Magnetic squares for welding which leave both hands free; magnetic welding holder for welding, soldering, assembly, marking, spreading, etc.
• Sturdy and compact arrow design fixes your workpiece in a 45-degree, 90-degree or 135-degree angle.
• Anti-Collision Anti-scratch - The design of the metal shell and resin edge banding is resistant to collision and scratches. Made of high - quality steel, the magnet has strong suction, does not rust, and is durable.
• Ideal for being used as holder and positioner in welding, soldering, marking off, pipe installation.
• Magnetic Weld Holders are designed to work as an Extra Hand - It enables fast and accelerative holding of most iron objects and tools.

• Material: Others, Color: Green
• Item Dimension: 20 x 20 x 5.0 cm
• No Warranty
• Model: C10FCE2, 1520W
• Compound Saw
• Mitre Saw 255mm
• Package Contents: nil