Construction Chemicals - Water Proofing Chemicals Products

• Ready to use One component coating, easy to apply with Brush for mild dampness, patch repair & hairline cracks
• Quick Repair Fast drying time. Dries to the touch in 30 minutes, re-coat in 4 hours.
• Multipurpose Suitable for indoor & outdoor application
• No dilution required, ready to use, brush applicable. Tintable and can be used over painted surfaces
• Moisture cure technology - Cures effectively even in damp condition

• RUSTICIDE performs rust removal and rust prevention in one operation in mild conditions
• New/old reinforcement steel in new construction
• Embedded steel in repairable structures
• Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters and other structural members

• BELLOX ENTERPRISE This product can be directly painted on the wall/ceramic tile/stone/cement foundation, not peeling/powder, effectively prevent the substrate seepage, long service life
• BELLOX ENTERPRISE Protective Coating: It has strong adhesion and sealing effect, which is immediate and lasts for many years. Protect surfaces from water and various liquids, ultraviolet (UV) radiation, and other harmful chemicals. Prevent any damage caused by corrosion.
• BELLOX ENTERPRISE Wide range of applications - Can be used for crack seepage, window sill seepage, toilet waterproofing sealant seepage, wall seepage, roof seepage, exterior wall seepage, etc. It is suitable for sealing gaps, seams, and leaks and can be used on all buildingMATERIAL.
• BELLOX ENTERPRISE Water resistance: excellent, Liquid type: water emulsion type
• BELLOX ENTERPRISE Durable: Help save time, money and energy because it can long-term protection after use. It is waterproof, ensuring maximum performance and accepting paint.

• Roof Waterproofing
• Structure Waterproofing
• Water Tank Waterproofing / Swimming Pool
• External Wall Waterproofing
• Bathroom Waterproofing

• This product can be directly painted on the wall/ceramic tile/stone/cement foundation, not peeling/powder, effectively prevent the substrate seepage, long service life
• Protective Coating: It has strong adhesion and sealing effect, which is immediate and lasts for many years. Protect surfaces from water and various liquids, ultraviolet (UV) radiation, and other harmful chemicals. Prevent any damage caused by corrosion.
• Wide range of applications - Can be used for crack seepage, window sill seepage, toilet waterproofing sealant seepage, wall seepage, roof seepage, exterior wall seepage, etc. It is suitable for sealing gaps, seams, and leaks and can be used on all buildingMATERIAL.
• Water resistance: excellent, Liquid type: water emulsion type
• Durable: Help save time, money and energy because it can long-term protection after use. It is waterproof, ensuring maximum performance and accepting paint.

• Non-toxic in nature, economical and can easily be applied with brush or roller
• 2 component consisting of grey colour free-flowing powder and liquid polymer to be mixed along with clean water in the ratio of 3:1 by weight and to be applied on surfaces.
• Self priming flexible water-proofing membrane which provides high water impermeability at 5 bar pressure.
• Can be applied on surfaces of balconies, bathrooms, storage water tanks and swimming pools to provide long term waterproof surface
• Each 20 kg pack is sufficient for 100 sq ft

• Buildingshop fiber glass sheet is made of fiber glass, it is characterized by high tensile strength, good flexibility and bending stability.
• It also can be used for fiber sheet for roof waterproofing, fiber wall coating, plastering mesh, fiberglass cloth, the insulation of the steam pipe, gas pipe, water pipe, fence, metal architectural decoration etc.
• It is designed to be used as a buildingMATERIALfor waterproofing, plastering, reinforcing concrete, fiber reinforced plastic, reinforcing plasterboard, wall coating, roofing etc
• Fiberglass mesh waterproofing membrane has excellent durability to ultraviolet rays, weathering resistance, resistance to water, humidity, acid and alkali, anti-rotten.More importantly, fiberglass mesh is good to ventilate, breathable and can reduce indoor air pollution.
• BuildersShop is a professional manufacturer and exporter of waterproofingMATERIAL. Our main products include bituminous waterproofing membrane, fiberglass mesh tape, fiberglass coated fabric, fiberglass mesh cloth, fiberglass mesh tape, fiberglass mesh cloth,

• No Hazardous Air Pollutants ? free of toluene and xylene

• UPGRADED BUTYL TAPE?Our butyl tape thickness is 1.5mm which is strong adhesive , The new PET aluminum film was added with non-woven fabric and anti-aging film, and the corrosion resistance and anti-aging effect were stronger. thicker and heavier than similar products, toxic-free, strong adhesive, high density waterproof, UV resistant, vapor prevent.
• WIDE APPLICATION: Suitable for roof leaks, window sealing, rv awning, gutters, down spouts, boats, personal watercrafts, canoes, outdoor equipment, mobile homes, RVS & campers, PVC & plumbing pipes, sprinkler systems, doors, walls, seams, vents, air ducts, HVAC systems, DIY projects, etc.
• DURABLE & PERMANENT USE--High adhesion strength, strong viscosity persistence and high peel strength, Great reflective heat insulation effect, the use of small grid corrosion-resistant aluminum foil film, plus thick viscose on indoor heat insulation, cooling and noise reduction, reducing the load operation of indoor air conditioning.
• EASY TO USE--Before attaching the tape, keep the target surface clean, dry and oil-free. Peel off the released film and then apply this butyl sealant tape to the surface.
• SAVE VALUABLE TIME: The application of the Aluminium foil tape will save you a significant amount of time, as the roll allows for a smooth application without any disruptions. The water sealant tape will not stick or catch on the roll.

• Made of high-qualityMATERIAL, friendly to the human body and the environment, non-toxic. It has been tested and approved and has a long duration. It will not harm humans or surfaces.
• It has strong adhesion and sealing effect, which is immediate and lasts for many years. Protect surfaces from water and various liquids, ultraviolet (UV) radiation, and other harmful chemicals. Prevent any damage caused by corrosion.
• This adhesive becomes transparent after use and will not turn yellow over time. Suitable for tiles, bricks, concrete, wood, metal, PVC, etc., without causing surface damage. All you have to do is "brush" the desired surface with glue, and you are done! It immediately and effectively seals pipeline leaks on walls, ceilings, roofs, window sills, etc.
• This is a revolutionary formula based on water and rubber that can penetrate joints, cracks, and leaks and seal any cracked surfaces. At the same time, it forms a waterproof and protective coating in the adjacent area.
• Package Content : 1 x Transparent Adhesive Glue

• Easy to apply by brush
• Improve cement power
• Prevent peeling blister formation
• Provide a protective coating for cemented surface
• No-VOC i.e. safely use for green construction

• Color: transparent
• Water resistance: excellent, Liquid type: water emulsion type
• Safe operation, simple and convenient construction, cost-effective
• This product can be directly painted on the wall/ceramic tile/stone/cement foundation, not peeling/powder, effectively prevent the substrate seepage, long service life.
• Product characteristics: waterproof, mould proof and antifouling

• USP Dr Fixit Newcoat is Roof and Terrace Waterproofing solution made of micro fibre reinforced liquid applied membrane coating that forms a tough film resistant to UV
• SUSTAIN FOOT TRAFFIC -Dr Fixit Newcoat can sustain foot traffic and is most suitable as a heavy-duty coating for repairs where there is no need to dismantle the existing brick bat or screed system
• UV RESISTANT- DrFixit Newcoat is a micro fibre reinforced liquid applied membrane coating that forms a tough film resistant to UV

• RIDER CLEAR COAT is a ready to use waterproofing- water repellent transparent coating
• RIDER CLEAR COAT can be applied by brush ,roller or spray
• RIDER CLEAR COAT does not affect or change the appearance of base substrate; It will be same after drying
• RIDER CLEAR COAT Improved thermal insulation, Prevents Painted surface from algae & dirt pickup. Do not buff after application. Allow it to cure for 24 hours
• Excellent adhesion to Tiles, concrete, plaster, stone, china chips, brick work and paint

• Water proofing of Pipes, Tanks & Irrigation Canals, Roof and Balcony Gardens
• Underwater leak sealant, Metal leakage seal
• Clean the surface thoroughly to eliminate all foreignMATERIAL
• Apply Bituminous Primer on cleaned surface. Lay the felt either with cold sticker compound by trowel and/or with hot blown Bitumen grade
• Pack of 3 Meter Length Tar Sheet - 3 FT Width