Borewell Equipment Manufacturers By Generic

• 1 year warranty
• Water filled

• Sailent Features : 1. High quality Extruded Aluminium motor body 2. Brass forged impellers 3. Double sealed precision ball bearings 4. Mechanical seal with high quality alumina seal face 5. TEFC motor 6. Capacitor start & Run type 7. Fitted with Thermal overload protector 8. Fitted with Brass inserts Non clogging pump 6. Low voltage operation
• Application 1. Domestic use, Over head tanks. 2. Hotels and Apartments 3. Curing and Construction sites 4. Small irrigation 5. Booster Applications.

• It is of 1.5 HP, 230V, 50 Hz, Single Phase pump with Panel
• Rouged design and suitable for sump and well
• It comes with 1 Years of Warranty

• Sailent Features : 1. High quality Extruded Aluminium motor body 2. Brass forged impellers 3. Double sealed precision ball bearings 4. Mechanical seal with high quality alumina seal face 5. TEFC motor 6. Capacitor start & Run type 7. Fitted with Thermal overload protector 8. Fitted with Brass inserts Non clogging pump 6. Low voltage operation
• Application 1. Domestic use, Over head tanks. 2. Hotels and Apartments 3. Curing and Construction sites 4. Small irrigation 5. Booster Applications.

• Float switch included
• 10 m cable included
• Material :STEEL BODY
• Style : WATER PUMP
• Sturdy quality High flow rate Horsepower: 0.75HP Pumps water effciently Save huge operational and maintenance cost

• Wall mounting, simple installation
• Material: C.I - Cast iron & Stainless steel body | Color: Green & Silver
• Package Contains:1 Water Hand Pump, GI Bend threaded for water flow
• Ideal for outdoor use, including in cottages, farms, ranches, and other suburban areas. At Home, Garden, Shop, it is best for individual use.
• Made of Cast iron & Stainless steel body, so that it is so Heavy. Once this Hand pump is fixed, it can be used for Lifetime.
• Made of sturdy cast iron that is resistant to harsh weather and regular use.

• *Optimized hydraulic design for efficient performance *Specially designed thrust
• bearing to withstand high axial load *T-Bolt design motor ensures rigid construction
• *Smooth surface finish results friction free flow of fluid *Designed for wide voltage
• applications *SS 304 grade stainless steel stage casings and impellers in radial flow series *SS 41 0 impeller
• Bronze impeller available in mixed flow series * Horizontal application model available

• Use:- Septic Tank Pump, Sludge Pump , Fish Waste And Cow Dung Removal Pump, Hotel & Construction Site Use.
• Heavy duty bearings *High efficiency copper wound motor *Safe and quite operation *Most reliable and hard wearing *Multipurpose applications *Easy and cost effective service ability.
• Working instructions: For testing and user guide 1.) Kindly lift the float switch up and plug in the socket to start the pump 2.) If float switch is at the bottom near the ground position pump will not start For continuous working of pump you can tie the float switch at the handle with rope.
• 3.) No need to put oil or water in the pump. 4.)The pump has to be fully submerged in the water and
• 5.)Automatic float switch function is useful when water is full and the switch is floating in water pump will remain on and when water level drops and switch comes in the bottom position pump will stop.

• High quality Extruded Aluminium motor body
• Double sealed precision ball bearings
• Brass forged impellers
• Mechanical seal with high quality alumina seal face
• . Fitted with Brass inserts Non clogging pump
• Low voltage operation
• Domestic use, Over head tanks
• Speed : 2800 rpm Head Range: 6 mtrs to 70 mtrs Discharge Range:4800 lph to 300 lph Insulation:Class B / F

• Designed for under submerged condition water applications
• All rotating parts are dynamically balanced for longer bearing life and Vibration free smooth operation
• Epoxy ceramic coated in the inner parts for rust free operation
• Fitted with Quality Oil seal Easy for installation and no platform required
• Non overloading power characteristics no fear of motor burning

• This product will be an excellent pick for you
• It ensures a hassle-free usage
• This product comes in a safe packaging

• Features Designed for under submerged condition water applications All rotating parts are dynamically balanced for longer bearing life and Vibration free smooth operation Epoxy ceramic coated in the inner parts for rust free operation Fitted with Quality Oil seal Easy for installation and no platform required Designed to withstand wide voltage fluctuations Non overloading power characteristics no fear of motor burning
• Topping up the motor Unscrew the Brass Plugs 1 and 2, fitted on top of the motor as shown in Fig. 1 below, and fill the motor with pure drinking water till water overflows from the other filling hole. Gently rock the motor to release air bubbles and further top up if necessary. Then replace the two plugs.
• The brass Plug 3 mounted on the bottom of the motor, is used for draining the water from within the motor. Ensure all three Brass Plugs are tightened to prevent leakage of water from within the motor. Check for leakages before lowering the OWS. Use prescribed pipe sizes as mentioned on the product name plate. Check the level of silt at the bottom of the well. Refer Fig. 2, shown below, for locating the OWS for operation with flooded suction
• Use the eye bolts / lifting lugs for lifting / lowering the OWS using appropriate equipment. Keep the wire ropes remains tied for lifting of the pump set for future. To prevent the motor from getting exposed during pumping, ensure the suction strainer is fitted above the level of the motor. This is done by fitting one end of a bend to the pump suction flange and the strainer to the other end of the bend, thereby ensuring that the level does not fall below the strainer.
• Water proofing the submersible motor cable - supply cable joint DOL OWS Motors are supplied with a single 3 core PVC insulated flat cable of length 3 meters. The free end of the 3 core cable of the motor needs to be connected to the supply cable from the control panel. As this joint is always nearly submerged in water, the joint needs to be water proof.
• SD OWS Motors are provided with two separate 3 core PVC insulated flat cable, each of 3 meters length. Repeat the procedure for both 3 core PVC flat cables from the motor to the two cables from the Control Panel.
• Electrical installation As far as possible, do not use multiple joints in the electrical cabling while connecting the Control Panel to the OWS. Ground the pump set using the two earth screws provided on the leg of the motor body. Ensure electrical joints, if any, are properly and adequately insulated. Connect the cable properly to the starter terminals to avoid loose connections. Factor in low voltage operation while selecting cable size.
• Checking rotation of OWS Power up the OWS and observe the discharge from the pump. Next interchange any two phase wires, power up the OWS and observe the discharge from the pump. In case the discharge is more after interchanging any two phase wires, then the impeller is rotating in the correct direction within the volute casing. If the discharge after interchanging any two phase wires is lower, then the previous phase wire connection was correct. Now revert back to the old phase wire connection.

• Single Phase . AC 180 - 240V. Maximum Power Consumption 8 - 12Amps.
• Cable 5 Mtr. 1 + 1 Year Extended Warranty (24 Months). No warranty for Panel Board
• Copper Winding. Stainless Steel Shaft. Less Power Consumption
• Head Range upto 120 Feet with Discharge up to 3 Liters Per Second at rated head 3mtr.
• Coil Burn Due to Dry Run or Improper Installation / Usage are not covered under warranty
• Highly durable water cooled rewindable motor. High Quality Bearing and Castings. Dynamically balanced rotors and impellers ensure vibration free performance and enhanced life

• Perfect for household and utility applications of transferring water from one place to another, solved the water shortage problems of surface water.
• Widely Use: an external hose or pipe connection (top) thread, stainless steel body, easy to carry. Industrial grade heavy duty, good as for home usageIdeal for village, househlod, farm, camping car water supply, field etc.
• Work with solar panel directly (24 volt > 325 watt )or 150 x 2 panel or work with 24V battery and working voltage range 18 V-36 V dc. (Double pole Mcb isolator 25 amp or 40 amp + - connection )
• Material: The solar submersible well pump overall stainless steel fuselage, motor wire is copper, oil motor, screw material is SS and rubber high-quality materials, durable, safety and environmental protection. Comfortable and reliable operation thanks.
• Features: No leakage, low noise, environmental protection, aesthetics, ease of installation and so on Simple operation and save power. Automatically adjusts to your needs.Perfect for household and utility applications of transferring water from one place to another, solved the water shortage problems of surface water
• Any Technical Assistance call on Helpline No:- 91-8879856993

• *Optimized hydraulic design for efficient performance *Specially designed thrust bearing to withstand high axial load *T-Bolt design motor ensures rigid construction *Smooth surface finish results friction free flow of fluid *Designed for wide voltage applications *SS 304 grade stainless steel stage casings and impellers in radial flow series *SS 41 0 impeller/ Bronze impeller available in mixed flow series * Horizontal application model available
• MATERIAL OF CONSTRUCTION Casing: Cast Iron FG 200 Impeller: Glass filled Noryl Motor Shaft: SS 420 Pump Shaft: SS 410 Motor Housing: Cast Iron FG 200 Diaphragm: Nitrile Rubber Bush: LTB
• APPLICATION Domestic, Commercial and small irrigation water supply. House, Flats, Bungalows, High Storey buildings and Commercial complexes. Small farms & gardens. Sea-shore area. Small scale industries.