Power Tools By Bosch

• The HSS Twist Drill Bit Ground is for drilling through metal with maximum precisionThe bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precisionThe split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm
• This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edgesThis bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plasticsThe HSS Twist Drill Bit Ground is manufactured to DIN 338
• The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers
• Diameter (D) mm: 14,00

• Twist drill bit made of high speed steel manufactured to DIN 338
• Right-hand cutting twist drill bit, Type N, 135 degree drill bit tip, split, point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter, drill bit colour: polished
• Two-cutter, cylindrical, two flutes

• The HSS Twist Drill Bit Ground is for drilling through metal with maximum precisionThe bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precisionThe split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm
• This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edgesThis bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plasticsThe HSS Twist Drill Bit Ground is manufactured to DIN 338
• The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers
• Diameter (D) mm: 16,00

• Twist drill bit made of high speed steel manufactured to DIN 338
• Right-hand cutting twist drill bit, Type N, 135 degree drill bit tip, split, point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter, drill bit colour: polished
• Two-cutter, cylindrical, two flutes

• The annular cutter is suitable for making clearance holes on metal, for bolt connection, as well as for cables & pipesIts Effortless drilling, with comparable durability makes it the best choice
• Standard 19mm Universal Shank that fits Magnetic drills with 19mm Universal interface or weldon interfaceWorks on Magnetic drillsUsing with a lubricant increases the life of the annular cutter
• Fine grade carbide ensures high hardness and thus gives extended long lifeIt further ensures cutting rate, as well as strong resistance to wearThe Silver brazing of the carbide tips ensures a high brazing strength compared to Copper brazing
• For Diameters above 18mm, the Optimized tip geometry which is an Inner-middle-outer combination* maximize cutting action and reduce friction
• 20mm dia and 50mm depth

• Durable screwdriver bits for all standard screw types and sizes
• Magnetic universal holder for fast bit changes and a reliable screw hold in the bit
• Practical manual screwdriver with ratchet function and bit storage in the handle

• Color: Green/Black
• Item Dimension: 37.01mm x 34.1mm x 8.9mm
• 1-Piece Diameter Gauge, 1-Piece Countersink Bit, 1-Piece Measurement Tape, 1-Piece Water Level , 1-Piece Allen Key, 1-Piece Magnetic Universal Holder, 1-Piece Adapter For Socket Wrench, 1-Piece Adapter For Holesaw, 1-Piece Hammer , 1-Piece Adjustable Spanner, 1-Piece Needle Nose Pliers , 1-Piece Combination Pliers, 8-Piece Socket Wrenches, 40-Piece Screwdriver Bits, 18-Piece Hss-Tin Metal Drill Bits 10mm, 7-Piece Tc Masonry Drill Bits, 7-Piece Wood Drill Bits, 3-Piece Flat Drill Bits Titanium, 4-Piece Hole Saw and 4-Piece Hex
• No warranty
• 18 HSS-tin metal drill bits dia. 1-10mm: 7 tc masonry drill bits dia. 3-8mm: 7 wood drill bits dia. 3-10mm: 3 flat drill bits titanium dia. 16/22/32mm
• 40 screwdriver bits l=25mm (1 of each: Ph 0/0/1/1/2/2/2/3/3/3, pz 0/0/1/1/2/2/2/3/3/3, sl 4/4/6/6/7/7, Hex 3/4/5/6, t 10/10/15/15/20/20/25/25/30/40)
• 8 socket wrenches 5-13mm: 4 depth stops dia. 3/5/8/10mm: 4 HCS hole saws dia. 32/38/45/54mm
• This handy 103 piece mixed titanium set from Bosch for using with power drills and screwdrivers

• The HSS Twist Drill Bit Ground is for drilling through metal with maximum precisionThe bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precisionThe split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mmThe HSS Twist Drill Bit Ground is manufactured to DIN 338
• vThis precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edgesThis bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers
• Diameter (D) mm: 4,30

• cordless

• No-load settings: 0-1300, 0-2000, 0-2800 rpm
• Impact rate settings: 0-1100, 0-2600, 0-3200 bpm
• High performance under tough working conditions
• Improved ergonomic slim grip design for fatigueless use
• Outstanding mobility solution, makes work more convenient

• Convenient lock-on switch for both right and left hand users
• Parking shoe, no harm to wood surface
• 2 pcs resharpable HSS blades for lower maintenance cost
• Robust plate with 3 V groove
• Ergonomic handle for comfort holding during planning
• Warranty 1 Year from the date of invoice (provide invoice copy to claim warranty); For any queries please contact Bosch Power Tools India Customer Service Number (Toll Free). Join Bosch BeConnected for extended warranty & rewards

• Forward/reverse rotation
• Speed trigger with electronic control for exact pilot drilling
• Robust and Powerful 600 W motor
• Low weight of only 1.7 kg for fatigue-free working
• Soft in line grip for a secure hold|For any queries please contact Customer Service Number 1800-425-8665 (Toll free)|Warranty - 6 months from the date of invoice (provide invoice copy to claim warranty)

• 1 X Bosch GSB 120 Li 1X 12 Volts Lithium Ion Batteries 1 X Hardcase 1 X Battery Charger 1 X Manual
• No self-discharge, no memory effect and a higher energy density thanks to Li-Ion battery technology
• Autolock chuck 1.0 - 10.0 mm
• Optimized torque for screwdriving and speed for drilling thanks to 2-speed planetary gearbox
• Metalworking The professional power tools for metalworking from Bosch.
• Best work results with speed pre-selection for applications requiring material-specific speed
• Convenient change of accessories Keyless chuck opens and closes easily

• The HSS Twist Drill Bit Ground is for drilling through metal with maximum precisionThe bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precisionThe split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mmThe HSS Twist Drill Bit Ground is manufactured to DIN 338
• vThis precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edgesThis bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers
• Diameter (D) mm: 7,20