Construction Services - Water Proofing Contractors Products

• Spray Adhesive for Quick Bonding of Plywood and laminate | Excellent Grab - High initial Strength | Fast Setting | Easy to use - With Adjustable Nozzle
• Make sure the surfaces to be bonded are clean, dry, and free from dirt, dust, oil, paint, wax, or grease, For the best result, the temperature of the adhesive and the surface being bonded should be between 16-degree Celcius - 27-degree Celcius. Use with adequate ventilation, Shake the aerosol well before using, Prior use. Check compatibility by spraying a small test patch of the adhesive on the substrate. This product may degrade some substrates.
• Tune the spray pattern mode for the desired width of the application area and adjust the spray flow in High, medium, and Low speed as per requirement., Spray about 10 - 20 cm away at a 90-degree angle to the surface, applying a uniform, even coat of adhesive to obtain 100% surface coverage. , Spray on both surfaces to be bonded, one surface vertically and the other surface horizontally.
• After Spraying allows the adhesive to dry, time may vary due to humidity and temperature variations for tack development. The surface should be tacky and ready for bond development when the coating is in dry condition and no adhesive transfers when touched Position substrates Correctly and press firmly, with adequate pressure starting from one end to ensure uniform contact so that no air bubbles are left behind.

• Water Resistant

• Water Resistant
• Easy to Use and Clean
• No Peeling off Joints
• High Compresive and Tensile Strength
• Shiny and Smooth Joints Forever

• Non-Adhesive, self-fusing. Insulates up to 9000 volts.
• Wide Operating Temperature - 50 Deg C To 260 Deg C
• Suitable for Outdoor Application. Weather and corrosion resistant
• Conformable, Watertight, Elongation upto 300%
• Product Made in India

• Best Quality
• Crayola
• Original