Pump Manufacturers By Generic

• oil transfer pump kit will quickly starts syphoning liquid with a rubber hand pump. Hand pump with a syphon for basic liquids like air, water, oil, and gasoline. with two durable, transparent, flexible PVC hose.
• Never begin the siphoning process with your mouth open; it is incredibly risky and incredibly ineffective. psdg fule transfer pump kit is not appropriate for drinking water, salt water, or other corrosive or chemical substances.
• Ideal for transferring gas in an emergency, the syphon hand pump can be used for air, water, oil, and other common liquids. It is necessary for the liquid you are seeking to get rid of to be higher than the container you are flowing into.
• Material : PVC, Rubber, Copper

• Connection size - 1/2 threading inlet & outlet.
• For household cold/ hot water supply or circulation, it is fixed with automatic switch.
• This pump is not to pump water from the source, this pump is to increase pressure into your house.
• Its a pressure pump mainly which can be installed at personal storage tank level or little below tank & not above. It has no suction.
• This pump is not to pump water from the source, this pump is to increase pressure into your house.
• Only First Time Run the Pump on Manual then Switch to Auto Mode so its Catches No Air. Its very simple & easy to use.
• Any Technical Assistance call on Helpline No:- 91-8879856993

• 19 Liters Pressure Tank
• Diaphragm Pressure tank 19 ltr
• Ideal for Pressure booster pumps
• 1" Thread size for installation
• Horizontal mount pressure tank

• *Optimized hydraulic design for efficient performance *Specially designed thrust bearing to withstand high axial load *T-Bolt design motor ensures rigid construction *Smooth surface finish results friction free flow of fluid *Designed for wide voltage applications *SS 304 grade stainless steel stage casings and impellers in radial flow series *SS 41 0 impeller/ Bronze impeller available in mixed flow series * Horizontal application model available
• MATERIAL OF CONSTRUCTION Casing: Cast Iron FG 200 Impeller: Glass filled Noryl Motor Shaft: SS 420 Pump Shaft: SS 410 Motor Housing: Cast Iron FG 200 Diaphragm: Nitrile Rubber Bush: LTB
• APPLICATION Domestic, Commercial and small irrigation water supply. House, Flats, Bungalows, High Storey buildings and Commercial complexes. Small farms & gardens. Sea-shore area. Small scale industries.

• It is 0. 5 HP CRI MIKI Pressure Pump
• Used for pressure boosting in domestic bathrooms, kitchens, washing machines, shower cubicles
• It is fitted with an automatic pressure kit which switches the pump on and off based on turning on and off of the tap

• APPLICATIONS Domestic Irrigation Farms Gardens Industry Civil applications FEATURES : *High operating efficiency resulting in lower power consumption *Good suction lift characteristics *Dynamically balanced rotating parts including rotor and impeller *Balanced and rigid construction *Back pull-out design for easy servicing & repair *Single shaft ensures permanent & correct alignment *Inbuilt thermal over load protector in all single-phase pumpsets

• Automatic ON/OFF system: The automatic pump controller provides a hassle-free operation by automatically turning the water pump ON and OFF based on the water level in the storage tank.
• Dry run protection and silent operation: The controller prevents damage to the pump by stopping its operation during dry runs, while also ensuring a quiet and compact performance.
• Inbuilt thermal overload protector and reset button: The controller includes a built-in thermal overload protector to prevent overheating, with a convenient reset button for easy troubleshooting.
• Constant pressure maintenance and capacity: The automatic pump controller maintains a constant water pressure of up to 10 BAR, handling a maximum power of 1.5KW and operating at a rated voltage of 220-240V.
• Easy installation: The controller comes with two sets of wires for a quick and straightforward installation one wire set connects to the pump, while the other connects to the power supply.
• Versatile and efficient: The automatic pump controller's features make it an ideal choice for various applications, ensuring smooth and efficient water management with minimal intervention required from users.

• The pump suction and delivery casings shall be of CF8M Investment Cast and have axial suction and radial discharge port.
• The pump shall have fabricated closed type impellers and bowl diffuser casings made out of AISI 304 Stainless steel sheet metal.
• The Pump shaft sealing will be by mechanical shaft seal of Carbon/Ceramic/Viton/AISI 316 Construction suitable for 10 bar pressure rating and water temperature from 0 to +90 deg. C.
• The pump shall be close coupled with a totally enclosed fan cooled type, 2900 rpm Induction motor with F class insulation, S1 duty and IP55 protection. 1 phase, 230 volts, 50 Hz (Standard Supply), 3 phase, 415 volts, 50 Hz.
• All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns

• Household and commercial water supply
• *Heating and washing system Liquid temperature from 20 deg C upto 120 deg C Built-in thermal protection F class installation 80 Start / Stop per hour
• Application *Shower Panels * Apartments, Bungalows, Small resorts and Hotels * RO Plant *Garden Irrigation & Fountains
• Stainless steel Diffusers and Impellers * Noiseless, wear resistance *Stainless steel shaft *Low maintenance, extended pump life Ceramic and graphite mechanical seal Precisely Designed winding
• IP 44 Prevents dust & Spillage of water* Improved vertical tank with pressure switch Auto ON and OFF.

• *Forged brass Impellers * Noiseless, wear resistance *Stainless steel shaft *Low maintenance, extended pump life Ceramic and graphite mechanical seal Precisely Designed winding* Designed for high start / stop per hour (75 per hour)* Thermal-cut out relay Provides winding protection *Insulation class F To improve winding* insulation Protection IP 44 Prevents dust & Spillage of water* Improved vertical tank with pressure switch Auto ON and OFF.
• Application *Shower Panels * Apartments, Bungalows, Small resorts and Hotels * RO Plant *Garden Irrigation & Fountains *Household and commercial water supply *Heating and washing system
• Liquid temperature from 20 deg C upto 120 deg C Built-in thermal protection F class installation 70 Start / Stop per hour
• Function The Pressure Booster System consists suitably assembled with automatic pressure control (Pressure guage, Pressure switch brass NRV and Brass five way connector) and Pressure tank. The pressure Booster system is suitable where the main supply lines have low pressure and wherever boosting is required and wherever pressure need to be maintained. The pump will automatically switch ON/OFF to maintain the output pressure.

• *Forged brass Impellers * Noiseless, wear resistance *Stainless steel shaft *Low maintenance, extended pump life Ceramic and graphite mechanical seal Precisely Designed winding* Designed for high start / stop per hour (75 per hour)* Thermal-cut out relay Provides winding protection *Insulation class F To improve winding* insulation Protection IP 44 Prevents dust & Spillage of water* Improved vertical tank with pressure switch Auto ON and OFF.
• Application *Shower Panels * Apartments, Bungalows, Small resorts and Hotels * RO Plant *Garden Irrigation & Fountains *Household and commercial water supply *Heating and washing system
• Liquid temperature from 20 deg C upto 120 deg C Built-in thermal protection F class installation 70 Start / Stop per hour
• Function The Pressure Booster System consists suitably assembled with automatic pressure control (Pressure guage, Pressure switch brass NRV and Brass five way connector) and Pressure tank. The pressure Booster system is suitable where the main supply lines have low pressure and wherever boosting is required and wherever pressure need to be maintained. The pump will automatically switch ON/OFF to maintain the output pressure.

• Sailent Features : 1. High quality Extruded Aluminium motor body 2. Brass forged impellers 3. Double sealed precision ball bearings 4. Mechanical seal with high quality alumina seal face 5. TEFC motor 6. Capacitor start & Run type 7. Fitted with Thermal overload protector 8. Fitted with Brass inserts Non clogging pump 6. Low voltage operation
• Application 1. Domestic use, Over head tanks. 2. Hotels and Apartments 3. Curing and Construction sites 4. Small irrigation 5. Booster Applications.

• Application *Shower Panels * Apartments, Bungalows, Small resorts and Hotels * RO Plant *Garden Irrigation & Fountains *Household and commercial water supply *Heating and washing system
• Ensures even pressure at all the water outlets Automatic ON & OFF of pump while opening & closing of taps In-Built thermal overload protector, protects motor from overload fault Lesser running cost than the conventional systems Factory tested system and supplied as a package
• Automatic pump controller unit uniquely designed to manage constant pressure and water flow through out the system. It STARTS the pump automatically whenever there is a pressure drop in the pipe line and STOP the pump automatically whenever it reaches maximum preset level of pressure in the pipe line. So it makes the entire system effective and efficient. In-built check valve & integrated system protect the pump from back flow of water & dry running which enhance the life span of the pump.

• Product Length: Pls refer to our size picture to check the detail of Hose Length
• Application: for gentle watering of flowers, plants & shrubs,garden irrigation car washing
• Name: Hand Pressure Sprayer
• 100% Brand new & High quality
• Suitable for cleaning cars, walls, windows, carpets, or watering gardens. Irrigation of garden lawns.
• Standard Garden Hose Quick Connect - You can use it perfectly with standard garden hoses, faucets, hose bibs and watering equipment.
• Spray distance: 10-15 meters
• Color: As Picture
• Material: Plastic & Brass Nozzle, Plastic Type: ABS
• Capacity: 2L