Pumps - Pump Testing Lab Products

• Intelligent automatic voltage regulation, after turning on the power switch, turn on the water outlet valve switch, start working, turn off the water outlet valve switch, the water pump automatically cuts off and stops working
• With oil resistance, heat resistance, acid resistance, alkali resistance, corrosion resistance, wear resistance and other properties
• Small size, small current, high pressure and low noise
• By installing an overpressure automatic pressure relief device on the pump body, the structure is simple
• Using permanent magnet DC motor, which can provide stable performance

• High Pressure: Enables a high testing pressure up to 2.5Mpa, and the large clear meter make the reading easier.
• Accurate Testing: Equipped with thick washers, the hydraulic testing pump has great air tightness for accurate test.
• Easy Operation: Through manual operation, you can use the to measure the hydraulic pressure in various pipelines.
• With Filter: There is a filter inside the manual pressure test pump, which will effectively filter the impurities.
• Broad Using: Can be flexibly applied to various fields, such as chemical, construction, plumbing, coal and so on.

• Pump is made of zinc alloy die cast metal for durability
• Features easy to read vacuum gauge graduated in inches and centimeters
• Turns a two-person job into a one-person job with it's easy to use system
• Easy to use without making a mess
• Kit contains vacuum pump reservoir jar, transfer lid storage lid, brake bleeding adapter package, test adaptor package, rubber cup adapter, tubing and users manual

• easy to install

• One person brake bleeding and automotive test kit. Vacuum tool can test and diagnose a wide varity of parts and common systems on any vehicle.
• Complete kit includes accessories for both brake bleeding and automotive diagnosis.
• Test Ignition timing, chokes, mechanical fuel pumps, and other vacuum actuated accessories.
• Pumps approximately 1 cubic inch per stroke, and develops and holds up to 25" of Vacuum gauge scales is in inches of Mercury New design which can be identified with the gray handle.

• The outside box is made of fine quality aluminum material, which is more soild
• The outside box is made of fine quality aluminum material, which is more soild
• Manual hydraulic water pressure test pipeline tester
• With filter, preventing impurity entering into the pump
• Pressure-resistant hose, G1/2" standard close nipple

• Intelligent automatic voltage regulation, after turning on the power switch, turn on the water outlet valve switch, start working, turn off the water outlet valve switch, the water pump automatically cuts off and stops working
• By installing an overpressure automatic pressure relief device on the pump body, the structure is simple
• With oil resistance, heat resistance, acid resistance, alkali resistance, corrosion resistance, wear resistance and other properties
• Small size, small current, high pressure and low noise
• The outlet diameter is 10mm, easy and convenient to operate

• Manual pressure test pump, easy to operate, maximum support 25kg test pressure.
• Suitable for using water or hydraulic oil as the medium for pressure vessels, pipelines, valves, etc.
• Normal tap water pressure of 0.3MPa, high - rise residential 0.4MPa, water pipe pressure pressure generally pressurized to 0.8MPa - 1.0MPa. (Tap water 0.1MPa 1KG pressure)
• Using high - quality iron spray paint material, fine workmanship and good performance.
• Widely used in chemical, construction, plumbing, petroleum, coal, shipbuilding and other industries.

• MULTIFUNCTION: JIFETOR all in one comprehensive coolant pressure tester fill kit includes leak detection, temperature measurement and coolant filling functions. Radiator pressure tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Coolant vacuum refill tool uses vacuum pump to extract air and form a vacuum to draw coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine.
• WIDE USAGE: Cooling system pressure tester and coolant bleeder kit is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suits for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion.
• COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. 21" metal hook, 23" transparent bleeder hose and 60" refill hose are included.
• COOLANT LEAK TEST AND THERMOMETER: Radiator coolant pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Stainless steel thermometer with index range 0 to 200?? (32 to 400??). American & European styles air plugs are included for you to choose. Customized blow molding case keeps everything in place and protects the gauges during storage
• SATISFACTORY CUSTOMER SERVICE: This set widely compatible with GM, BMW, VW, GMC, Porsche, Chevy, Dodge, JEEP, Chrysler and many other models cars trucks airlift. 30 days full refund with returned undamaged JIFETOR complete cooling system leakage detector and radiator coolant vacuum refiller set. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours.