Pumps - Pumps - Components Products

• The pump suction and delivery casings shall be of CF8M Investment Cast and have axial suction and radial discharge port.
• The pump shall have fabricated closed type impellers and bowl diffuser casings made out of AISI 304 Stainless steel sheet metal.
• The Pump shaft sealing will be by mechanical shaft seal of Carbon/Ceramic/Viton/AISI 316 Construction suitable for 10 bar pressure rating and water temperature from 0 to +90 deg. C.
• The pump shall be close coupled with a totally enclosed fan cooled type, 2900 rpm Induction motor with F class insulation, S1 duty and IP55 protection. 1 phase, 230 volts, 50 Hz (Standard Supply), 3 phase, 415 volts, 50 Hz.
• All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns

• Features Designed for under submerged condition water applications All rotating parts are dynamically balanced for longer bearing life and Vibration free smooth operation Epoxy ceramic coated in the inner parts for rust free operation Fitted with Quality Oil seal Easy for installation and no platform required Designed to withstand wide voltage fluctuations Non overloading power characteristics no fear of motor burning
• Topping up the motor Unscrew the Brass Plugs 1 and 2, fitted on top of the motor as shown in Fig. 1 below, and fill the motor with pure drinking water till water overflows from the other filling hole. Gently rock the motor to release air bubbles and further top up if necessary. Then replace the two plugs.
• The brass Plug 3 mounted on the bottom of the motor, is used for draining the water from within the motor. Ensure all three Brass Plugs are tightened to prevent leakage of water from within the motor. Check for leakages before lowering the OWS. Use prescribed pipe sizes as mentioned on the product name plate. Check the level of silt at the bottom of the well. Refer Fig. 2, shown below, for locating the OWS for operation with flooded suction
• Use the eye bolts / lifting lugs for lifting / lowering the OWS using appropriate equipment. Keep the wire ropes remains tied for lifting of the pump set for future. To prevent the motor from getting exposed during pumping, ensure the suction strainer is fitted above the level of the motor. This is done by fitting one end of a bend to the pump suction flange and the strainer to the other end of the bend, thereby ensuring that the level does not fall below the strainer.
• Water proofing the submersible motor cable - supply cable joint DOL OWS Motors are supplied with a single 3 core PVC insulated flat cable of length 3 meters. The free end of the 3 core cable of the motor needs to be connected to the supply cable from the control panel. As this joint is always nearly submerged in water, the joint needs to be water proof.
• SD OWS Motors are provided with two separate 3 core PVC insulated flat cable, each of 3 meters length. Repeat the procedure for both 3 core PVC flat cables from the motor to the two cables from the Control Panel.
• Electrical installation As far as possible, do not use multiple joints in the electrical cabling while connecting the Control Panel to the OWS. Ground the pump set using the two earth screws provided on the leg of the motor body. Ensure electrical joints, if any, are properly and adequately insulated. Connect the cable properly to the starter terminals to avoid loose connections. Factor in low voltage operation while selecting cable size.
• Checking rotation of OWS Power up the OWS and observe the discharge from the pump. Next interchange any two phase wires, power up the OWS and observe the discharge from the pump. In case the discharge is more after interchanging any two phase wires, then the impeller is rotating in the correct direction within the volute casing. If the discharge after interchanging any two phase wires is lower, then the previous phase wire connection was correct. Now revert back to the old phase wire connection.

• V4 waterfill borewell submersible 1hp 10 stage single phase
• Energy efficient, Dynamically balanced & Epoxy coated rotor
• Totally enclosed, water filled / oil filled squirrel cage induction motor, Cap Start & Run (PSC) for AC supply
• etter design - Better Efficiency - Low power consumption, Light weight - Ease in installation
• Silent running, Reliable in operation

• High Suction Capacity |High grade Electrical Stamping | High grade Stainless Steel Parts | Easy for Maintenance
• Rated voltage: 220V | Voltage range: 180V-260V (1PH) | Rated Frequency: 50Hz
• Max. head: Up to 45 meters
• Max. Discharge : Up to 3360 LPH.
• 1 year

• Regenerative Self priming Pumps with weather proof and rust proof cast iron pump casing and extruded aluminium motor body are suitable for pumping of water to overhead tanks in bungalows, fountains, car washing etc., Application 1. Domestic use, Over head tanks. 2. Hotels and Apartments 3. Curing and Construction sites 4. Small irrigation 5. Booster Applications. Motor Capacity:0.25 hp to 1.5 hp (220v, 50hz, Single Phase AC supply) Speed : 2800 rpm Head Range: 6 mtrs to 70 mtrs Discharge

• Water pumps for domestic use

• Material:Metal, Color:Multicolour

• *Forged brass Impellers * Noiseless, wear resistance *Stainless steel shaft *Low maintenance, extended pump life Ceramic and graphite mechanical seal Precisely Designed winding* Designed for high start / stop per hour (75 per hour)* Thermal-cut out relay Provides winding protection *Insulation class F To improve winding* insulation Protection IP 44 Prevents dust & Spillage of water* Improved vertical tank with pressure switch Auto ON and OFF.
• Application *Shower Panels * Apartments, Bungalows, Small resorts and Hotels * RO Plant *Garden Irrigation & Fountains *Household and commercial water supply *Heating and washing system
• Liquid temperature from 20 deg C upto 120 deg C Built-in thermal protection F class installation 70 Start / Stop per hour
• Function The Pressure Booster System consists suitably assembled with automatic pressure control (Pressure guage, Pressure switch brass NRV and Brass five way connector) and Pressure tank. The pressure Booster system is suitable where the main supply lines have low pressure and wherever boosting is required and wherever pressure need to be maintained. The pump will automatically switch ON/OFF to maintain the output pressure.

• Household and commercial water supply
• *Heating and washing system Liquid temperature from 20 deg C upto 120 deg C Built-in thermal protection F class installation 80 Start / Stop per hour
• Application *Shower Panels * Apartments, Bungalows, Small resorts and Hotels * RO Plant *Garden Irrigation & Fountains
• Stainless steel Diffusers and Impellers * Noiseless, wear resistance *Stainless steel shaft *Low maintenance, extended pump life Ceramic and graphite mechanical seal Precisely Designed winding
• IP 44 Prevents dust & Spillage of water* Improved vertical tank with pressure switch Auto ON and OFF.

• PREMIUM QUALITY VACCUM BAGS: Deejay vacuum storage bags are made using Polyamide Polyethylene to ensure the safety of stored items, the triple-seal formula acts as double security, making no air pass. This packing pouch is designed to block odour, water droplets, mildew, insects, and bugs
• DOUBLE SEAL ZIPPERS: The stay-on clip prevents clips of our plastic bags for storage from falling off the zipper or missing. This dustproof storage bag features separating zippers with one lower side and one higher side that can take apart easily. The separating zipper is easy to access, even if you have clumsy thumbs
• INCLUDED HAND VACCUM PUMP: This cloth organizer for wardrobe comes with a hand pump which is much easier and faster to suck the air out of the vacuum bags. The vacuum pump offers smooth pulling and pushing action, and the valve is designed to get every ounce of air out of the storage bag in the suction process
• MULTIPURPOSE STORAGE BAGS: These vacuum bags can be used to store various pieces, including soft toys, rugs, clothes, blankets, quilts, pillows, and extra tight airlocks, ensuring that they stay compressed. You can use these vacuum bags when travelling, and there will be still a lot of space to fit many other things
• REUSABLE AND EASY TO CARE: This vacuum bags is reusable and needs no special care. When the bag is not in use, ensure that it is safely folded and secured in a place away from sharp objects for long usage

• High Suction Capacity | High grade Electrical Stamping| High grade brass impeller | Easy for Maintenance
• Rated voltage: 220V | Voltage range: 180V-260V (1PH) | Rated Frequency: 50Hz
• Max. head: Up to 21 meters
• Max. discharge: Up to 1950 LPH
• 1 year

• Water pump for domestic use

• Material:Metal, Color:Multicolour