Roofing Fasteners By Lovely

• Need to use 14 mm diameter drill bit for drilling holes, the drilling depth should be greater than or equal to 145 mm. Load bearing upto 1.50 KN (150 KG Approx). Outer diameter approx 14 mm
• Wedge Expansion Fastener Length 150 mm, Drill Dia 14 mm, Bolt/Screw width- 10 mm.
• Ideal for Industrial/Commercial Construction Site Purpose.
• Ideal use for fitting in Concrete.Tested in Govt. Approved Labs.
• Package Content- 3 Pcs. Wedge Expansion Fasteners.

• Need to use 12 mm diameter drill bit for drilling holes, the drilling depth should be greater than or equal to 130 mm. Load bearing upto 2.50 KN (250 KG Approx). Outer diameter approx 12 mm
• Through Bolt Fastener Length 150 mm, Drill Dia 12 mm, Bolt/Screw width-12 mm.
• Raised impact section prevents thread damage during installation. High-performance stud anchor with optimized expansion cone and wedge design combined with special steel and coatings for outstanding performance in cracked and uncracked concrete. Pre-Fastening, Through-Fastening. Externally Threaded.
• Material composition: Steel, Zinc-plated. With SS Clip. Environmental conditions: Indoor, Outdoor, Dry & Wet Conditions.
• Package Content- 3 Pcs. of Through Bolt Fastener.

• High-performance stud anchor with optimised expansion cone and wedge design combined with special steel and coatings for outstanding performance in cracked and uncracked concrete
• Raised impact section prevents thread damage during installation
• Pre-Fastening, Through-Fastening. Externally Threaded
• Material composition: Steel, Zinc-plated. With SS Clip
• Environmental conditions: Indoor, Outdoor, Dry & Wet Conditions