Oatey 12802 1/2-Inch - 1-1/2-Inch, 9-1/2-Inch by 12-1/2 Aurora Solar Flashing, Aluminum - Product Features
- Can be used in commercial and residential applications where a water-tight seal for roof penetrations around the piping for solar mounting system is required
- Low profile flashing collar design provides a clean finished appearance
- Available in galvanized bases
- 180øF continuous heat and approved for type B installations
Oatey 41620 40 mil Gray to Liner Kit, 5-Feet x 6-Feet - Product Features
- Economical, time-tested flexible pan liner.
- Available in 30 & 40 mil thicknesses.
- Liner marked in 6"" increments for ease of measuring.
- Dam corners available.
- Meets ASTM Spec. D4551.
- Superior cold weather characteristics.
- Videos
- Shower Pan Liner Installation
- 40 Mil
Oatey 11830 0.5-Inch - 1-Inch Galvanized Solar Flashing - Product Features
- Self-Seal Solar Roof Flashing for Solar Applications
- Designed to flash around solar mounting systems
- Slips easily over Conduit - self-sealing to conduit surface
- Self-sealing elastomeric tear-out collar
- Collar will not crack, chip, peel or separate from metal base
- Slides over pipe - for pitch to 40 degrees
- Rustproof, stamped galvanized, 24 or 28 gauge
- Non-fading sealing collar
- 18-Inch x 18-Inch bases for code required areas
- Rated 180 degree F continuous heat
Oatey Roof flashing 12801 1-1/2, 9-1/2 X 12-1/2 Aurora? Solar Flashing, designed for use in commercial and residential applications - Product Features
- Can be used in commercial and residential applications where a water-tight seal for roof penetrations around the piping for solar mounting system is required
- Low profile flashing collar design provides a clean finished appearance
- Available in galvanized bases
- 180øF continuous heat and approved for type B installations
Oatey Roof flashing 14135 2" Collar, For No-Calk? Roof Flashings can be used as a secondary seal for commercial and residential applications - Product Features
- Use as a protective water shield (slides down over pipe)
- No caulking needed
- Do not use petroleum based products on rubber collars
- Non-fading collar material
Oatey 14136 All Flash Collar, 1.5-Inch - 3-Inch - Product Features
- Use as a protective water shield (slides down over pipe).
- No caulking needed.
- Do not use petroleum based products on rubber collars.
- Non-fading collar material.
Oatey 14052 0.25-Inch to 4-Inch Master Flash - Product Features
- The product is manufactured in China
- The product is highly durable and easy to use
- Easy installation and easy handling
- Universal roof flashing
- Slides over pipe for pitch to 45 Degree
- Multi-size pipe sealing range
- Molds to metals, plastic and more
- Non-fading EPDM collar
Oatey Roof flashing 14059 10" ? 18" Master Flash? 25" x 25" base, for use with profiled roofing materials and can be installed on every type of roofing surface. - Product Features
- Slides over pipe - for pitch to 45 degrees
- Use silicone sealant between base and surface, and secure with sheet metal screws
- Multi-size pipe sealing range
- Molds to metal, plastic, etc
- Non-fading EPDM collar
Oatey Roof flashing 14054 4" ? 7" Master Flash? 11" x 11" base, use with profiled roofing materials and can be installed on every type of roofing surface. - Product Features
- Slides over pipe - for pitch to 45 degrees
- Use silicone sealant between base and surface, and secure with sheet metal screws
- Multi-size pipe sealing range
- Molds to metal, plastic, etc
- Non-fading EPDM collar
Oatey Roof flashing 14055 5" ? 9" Master Flash? 12" x 12" base, for use with profiled roofing materials and can be installed on every type of roofing surface. - Product Features
- Slides over pipe - for pitch to 45 degrees
- Use silicone sealant between base and surface, and secure with sheet metal screws
- Multi-size pipe sealing range
- Molds to metal, plastic, etc
- Non-fading EPDM collar
Oatey Roof flashing 14056 6" ? 11" Master Flash? 14" x 14" base, for use with profiled roofing materials and can be installed on every type of roofing surface. - Product Features
- Slides over pipe - for pitch to 45 degrees
- Use silicone sealant between base and surface, and secure with sheet metal screws
- Multi-size pipe sealing range
- Molds to metal, plastic, etc
- Non-fading EPDM collar