Tile Coating By DR. FIXIT

• USP - DrFixit Fastflex is a 2 component cementitious waterproofing & protective coating for repair and new construction
• 4:1 ratio, respectively)
• APPLICATION METHOD - It is applied to waterproof and protect concrete and masonry substrates by forming a seamless, impervious layer of coating
• AREAS OF APPLICATION Dr Fixit Fastflex can be used on various surfaces in new construction such as waterproofing of roof or terrace, Bathroom and other wet areas, concrete water tanks and even swimming pools

• Flexibility: Provides a flexible and low permeable coating
• Application: Blinding coverage; Concrete slabs or roof slabs; Pile heads; Water tanks and swimming pools
• Appearance: Free flowing slurry
• Water permeability, slip resistant
• Waterproof, adhesion, low temperature resistant; Carbonation

• No primer is required when sealing joints in glass ceramics and vitreous surfaces
• UV resistant good UV resistance & insulation properties
• Cures by moisture absorption from air at ambient temperature & relative humidity
• Tough & flexible after curing so performs well during expansion & contraction

• Ready to use One component coating, easy to apply with Brush for mild dampness, patch repair & hairline cracks
• Quick Repair Fast drying time. Dries to the touch in 30 minutes, re-coat in 4 hours.
• Multipurpose Suitable for indoor & outdoor application
• No dilution required, ready to use, brush applicable. Tintable and can be used over painted surfaces
• Moisture cure technology - Cures effectively even in damp condition

• Very tough yet elastic coatingbreathable, hence can be applied over damp surfaces
• Provides strongly bonded waterproof coating
• No dilution required, ready to use, brush applicable
• Tintable and can be used over painted surfacesPrevents Mildew, Fungal & bad odour
• Provides coverage of 20-27 sqFt./kg in 2 coats

• USP Dr Fixit Newcoat is Roof Waterproofing solution made of micro fibre reinforced liquid applied membrane coating that forms a tough film resistant to UV
• SUSTAIN FOOT TRAFFIC -Dr Fixit Newcoat can sustain foot traffic and is most suitable as a heavy-duty coating for repairs where there is no need to dismantle the existing brick bat or screed system
• UV RESISTANT- Dr. Fixit Newcoat is a micro fibre reinforced liquid applied membrane coating that forms a tough film resistant to UV

• WATER RESISTANT - It has excellent water resistance with a quick adhesive tendency to concrete surfaces
• HOW TO USE 1) Use patra to remove the paint from the walls 2) remove the putty till you see the plaster of the wall 3)Use wire brush to clean the wall 4)Use brush to apply water on the wall 4)Mix Dr fixit dampguard in 1 unit water,1 unit base and 1 unit hardener ratio 6) Use a brush to apply Dr Fixit
• AREAS OF APPLICATION - Internal walls, ceilings, RCC water tanks

• PACKAGE CONTENTS: Contains 2 kg of sealing compound and 1 kg of liquid chemical additive