Lab Instruments & Supplies Products

• Precision Click
• Easy To Read Dial
• Soft Plunger Light Weight
• Number Of Channels: Single Channel
• Inaccuracy: 2.50/1.00 %

• Ford Cup B4 Viscometer
• Made as per IS standards
• The Viscosity Flow Cups are very easy to use instruments made of anodized aluminum with a stainless steel orifice

• Pinless Moisture meter is an electronic dampness indicator with a measuring process working on the principle of high frequency measurement.
• Used for non-destructive tracing dampess in building materials of all kinds as well as for detecting damp distribution in walls, ceiling and floors.
• Suitable for pre-testing the readiness of building materials for covering prior to CM Measurment Quickly indicates the moisture content of materials.
• Depth of penetration about 20 ? 40mm. Low battery Indication. Auto Power Off. Max / Min Record Function.
• Data Hold. White Backlit LCD Display. Measuring Range: 0 to 100%.

• Data Hold. Auto Power Off. High Precision AC/DC Low Current Measurement.
• Low battery and Overload Indication. Provides Analogue Output for Recording function.
• DC Voltage: 0 ? 400m / 4 / 40 / 400 / 600V; Accuracy: ?1.0%. AC Voltage: 0 - 400m / 4 / 40 / 400 / 600V; Accuracy: ?1.0%. DC Current: 0 ? 4 / 80A; Accuracy: ?2.8%. AC Current: 0 ? 4 / 80A; Accuracy: ?3.0%.
• Resistance: 0 ? 400 / 4k / 40k / 400k / 4M / 40M.Ohms; Accuracy: ?1.0%. Capacitance: 0 ? 40n / 400n / 4u / 40u / 100uF; Accuracy: ?3.0%. Frequency: 0 ? 5 / 50 / 500 / 5k / 50k / 500k / 5M / 10MHz; Accuracy: ?1.2%. Duty Cycle: 0.5 to 99.0%; Accuracy: ?1.2%.
• Confirms to CE, CAT-III 600V

• Dental Carvers
• It is used in restorative and prosthodontic procedures
• Laboratory waxing

• Multifunction Power Meter. Works on 6A / 230V AC.
• Displays Voltage, Current, Power, Power Factor, Frequency, KWh, CO2, Cost of running the equipment.
• Calculates total time consumed. Calculates cost of electricity consumed. Retains the readings while load shedding.
• Voltage: 100V AC ~ 260V. AC Current: upto 6A Power: 0 ? 1560W. KWh: 0 ? 9999KWh,
• Frequency: 45 ? 65 Hz. Total Time: 0 ? 9999$. Calculates CO2 emission.

• Lab Instruments Wooden Spring constant Unit with 5x100gm Weight .
• Useful in laboratory experiments in Engineering Physics lab , degree physics lab PU Physics lab .
• Spring On Stand With Slotted Weight 5x100gm Scale length 50cm

• For hardened Material Like Plaster, Concrete And Mortar
• Battery Operated. Low Battery Indication. Impact Proof Plastic Housing.
• Measuring principle : Electrical Resistance. Electrode length : 8mm. Electrodes : Integrated and replaceable.
• Display : Extra Large LCD
• Range : Wood, Paper : 6 - 44%. Hardened Material : 0.2 to 2.0%. Accuracy : Wood : ? 1%. Hardened Material : ?0.05%.

• Low Form 3.3 Borosilicate Glass with heavy wall and spout.
• These products made for heating by hot plate, flame, oven, microwave or heating mantles.
• Borosilicate 3.3 Glass Beaker 10 ml, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml, with Graduation Marks
• High temperature Can store acids. It can be heated many times to 473k -733k
• Large lab glass beakers use for chemistry set. Perfect for beginners as well as professional use too

• 4 Digits LCD, 32 X 65 mm Clamp Jaw, Data Hold, Open Clamp Jaw Indication
• Range 0.010 to 200 Ohms. Maximum Resolution 0.001 Ohms
• Display: 4 digit Backlit LCD; Auto Ranging Storage of Measured Data: 99 Data
• Setting of Resistance Alarm Critical Value: 1 ? 199 Ohms Data Hold, Auto Power Off
• Wider range, larger memory; Optional RS232 interface, available to transfer data to PC and generate report files, easy to analyse or backup data.

• Input Voltage 200V Ac to 240V AC 50Hz Fuse 1A .
• Power On/Off Switch With Indicator
• Output Voltage/Current +2V/1A Fixed With Inbuilt Short Circuit Overload Protection.
• This is easy to use at all Electronics & Physics Lab scientific experiments & others .

• High Resolution Up To 100Ua
• Display: 3-1/2 Digits 1999 Counts. Backlit LCD. Auto Power Off Max Hold Function.
• Clamp Jaw Dia: 30mm. Overload and Low Battery Indication.
• AC Current: 0 ? 200m / 2 / 200A. Accuracy: ?2.5%.
• Confirms to EN61010-1, EN61010-2-032, CAT II 600V.

• High quality Polypropylene Plastic Beakers - 50 ml
• It can be used for measuring of liquids.
• Lab grade tested. Export quality plastic beakers
• Perfect for any science class room,home or lab
• Graduated Polypropylene beakers hold hot liquids, but are not to be used over an open flame or electric hot plate.

• Features Highly Stable & Accurate Cell Constant Adjustment Facility 3? Digit Display Available in Laboratory & Field Models Manual Temperature Compensation Facility

• Simple distillation unit 1000 ml
• Round bottom flask 1000 ml
• Leibig condenser
• Recovery bend
• Receiver adapter