Lab Instruments & Supplies By METRAVI

• Compact Highly Reliable 3-1/2 Digit Instrument. Uses 4 Terminal Measurement method.
• Has 12.5 mm high 7 segment 3-1/2 Digits LED Display. Range : 0 - 1999u / 19.99m / 199.9m / 1.999 / 19.99 / 199.9 / 1999 /19.99K Ohms. Accuracy : + 0.3% + 2 dgs
• Normal Test Current : 1.5 / 0.75 / 0.75 / 75m / 7.5m/ 0.75m / 0.075mA. Warm up Time : 3 minutes.
• Input : 230V Single Phase AC 50Hz
• Complete with instruction manual, mains chord and test leads

• Hand Held , 9V battery Operated. 4 ? Digits 19999 Counts LCD Display.
• Sources :- DC voltage: 0 ? 199.99mV; Accuracy : ? 0.05%. DC Current: 0 ? 19.999mA; Accuracy: ? 0.05%.
• Measures :- DC Voltage: 0 ? 199.99mV; Accuracy: ?0.05%. DC Current : 0 ? 19.999mA; Accuracy: ? 0.05%.
• Output adjustable : By 10 Turn POT for ?COARSE? AND ?FINE?
• One year warranty against manufacturing defects

• Used for Both audible sound and machine noise. Used for both A and C weighting. Max Hold and Data Hold Facility. Has fast and slow response facility
• Provides Analog AC/DC outputs for the measurement made for connection to an analyzer or recorder.
• AC output of 0.65V rms at Full Scale (upper Limit of each level). DC Output of 10mV/dB.
• Built-in Self-Calibration check facility at 94db. Measures in both Low range of 35 to 100dB and hi range of 65 to 130dB.
• Range: 35 to 130dB. Accuracy: ? 3.5dB. Resolution: 0.1dB. Frequency Range: 30Hz to 10KHz.

• Clamp Jaw Size - 57Mm
• Low Battery Indication
• Provides Output Of 1Mv/A

• Non Contact Type Tachometer With Counter, Data Hold, Measures From 50Mm To 200Mm, Rpm Up To 99999Rpm, And Counts Up To 99999 Counts
• Backlit LCD Display. Maximum display: 99999. Over Range Indication. Low Battery Indication.
• n Photo Diode and Laser sensor. Measuring Distance: 50 mm ~ 200mm
• Drop Test: 1mt. Battery: 1.5V AAA type. PLEASE WATCH YOUTUBE VIDEO FOR USAGE INSTRUCTIONS.

• Split Probe type separate sensor; Sampling Rate 0.5S; Auto Range
• Lux / Fc Selectable; Max / Min Record; Hi/Lo Overload Indication; Data Hold
• Backlit LCD Display; Auto Power Off; Low Battery Indication
• Range: 0 ? 199,900 Lux / Fc; Accuracy:- ?5%
• Drop Test : 1m; Battery : 3*1.5V (AAA)

• Fully Protected DMM
• 1200V DC/AC RMS Protection in Voltage Ranges; 20A DC/AC RMS Protection in Ampere Ranges
• 600V DC/AC RMS Protection in Resistance, Capacitance, Temperature, Frequency, Diode Test and Continuity Test Range
• Surge Protection of 8kV peak IEC61010; "O" Ring Seal Body; IP-67 Protection
• 2 years Warranty against manufacturing defects

• Display: 3-1/2 digits LCD, maximum reading 1999.
• Range: 200/2000 mG,20/200?T. Resolution: 0.1/1 mG or 0.01/0.1 ?T.
• Frequency response: 30Hz to 300Hz. Sensor: Single Axis
• Accuracy: ?(2.5%?6dgt) at 50Hz/60Hz.
• Over load Indication Battery: 9V

• Temperature and Humidity meter with Non-contact Infrared Thermometer.
• Display: Dual Large Backlit LCD. Auto Power Off.
• Built-in Laser Pointer for Non-contact Temperature measurement Switchable between ?C / ?F units with Max and Hold function.
• Humidity Range: 5% to 95% RH; Accuracy: ? 3.5%RH. Temperature Range: -20 to 60?C and -4 to 140?F; Accuracy: ? 2?C / ? 3?F.
• For Non-contact Infrared Thermometer Mode: Range: -50 to 500?C / -58 to 932?F; Accuracy: ? 2%. Distance to Sighting Ratio: 8:1

• Data Hold facility to freeze the displayed data; Auto ranging; Annunciator display and automatic zero facility; With USB Interface for PC connectivity
• The correction factor need not be manually calculated for non standard light sources; Short rise and fall times
• Peak Hold function for tracing the peal signal of light pulse; Measures in both Lux and FC scales; Meter corrected for spectral relative efficiency
• Auto Power off facility; Max and Min recording facility; Relative measuring facility; One Silicon photo diode and spectral response filter
• Displays both in Lux and Foot-candle; Display: 3 ? digits LCD with high speed 42 segment bar graph; Range 1: 0 ? 40/400/4000/40,000/400,000 Lux; Range 2: 0 ? 400/4000/30,000 FC; Accuracy: ? 5%

• Phase Rotation Indicator. Large LCD Display. Three Phase Indication.
• No Battery Required. Nominal Voltage: 40V to 690V. AC Frequency Range: 15 to 400Hz.
• Power Supply: From Unit Under Test
• Electrical Safety: IEC 61010/EN 61010; IEC 61557-7/EN 61557-7
• Protection Level CAT III 600V, IP40

• Detects the presence of carbon monoxide (CO) and measures concentrations between 1 ? 1000 parts per million (PPM).
• The meter indicates the presence of carbon monoxide in two ways By a reading on the LCD in PPM. By a beeper tone.
• Max Hold and Data hold Facility. Has Backlit LCD Display.
• Range : 0 ? 1000PPM. Resolution : 1PPM. Accuracy : ?5% or ?10PPM.
• Warm up period:10 seconds. Sensor Type : Stabilized electrochemical Gas-specific (CO). Auto Power Off.

• 3-3/4 Digits 3999 Counts LCD Display. Data Hold. Auto Power Off. Jaw Size: 28mm.
• Overload Protection. Low Battery Indication. Confirms to CAT III 300V, IEC 61010. CE Certificate. Battery Operated.
• DC Current: 0 ? 40A / 400A DC; Accuracy: ? 2.0%. AC Current: 0 ? 40 / 400A AC; Accuracy: ? 2.5% Resistance: 0 ? 400 / 4k / 40K / 400k / 4M / 40M? Accuracy: ? 1.0%.
• DC Voltage: 0 ? 400mV / 4V / 40V / 400V / 600V DC; Accuracy: ? 0.8%. AC Voltage: 0 ? 4V / 40V / 400V / 600V AC; Accuracy: ? 1.0%.
• Frequency: 0 ? 10 / 100 / 1k / 10 k / 100 k / 1M / 10MHz; Accuracy: ? 0.1%. Duty Cycle, Diode and Continuity Test Facility.

• Provides fast and accurate Contact and Non-Contact RPM and surface speed measurement of rotating objects. One year warranty against manufacturing defect.
• Measures Rotation Speed (RPM), Total Revaluation(REV), Frequency (Hz), Surface Speed (M/M, I/M, F/M,Y/M), Length (M, In, FT, Yd).
• Wide Measure range and high resolution. Laser sighting. Display: 5 digits LCD. Accuracy: ? 0.05% ? 1 dgts.
• Contact Test Range: 2 to 20000 RPM. Non-Contact Test Range: 2 to 99,999. RPM Resolution: 0.1 RPM (up to 9999.9 RPM) / 1 RPM (over 10,000 RPM).
• Sampling Time : 0.5 sec. (over 120 RPM). Quartz Crystal Time Base. Optional Accessories: Mains Adaptor for 230V AC.

• Portable instrument for Calibrating process devices and measuring process signals.
• The Instrument powers or measures a two wire Current loop. Four functions provide the quality and accuracy of Hand Held Calibrator.
• LCD max display counts 1999. Current Source : 0 ? 19.99mA / 0 ? 24mA; Accuracy : ?0.25%
• DC mV Source : -199.9mA to ?199.9mV; Accuracy : ?0.25%. Current Measurement : 0 ? 19.99mA / 0 ? 24mA; Accuracy : ?0.25%.
• Power & Current Measurement of two wire loop : 0 ? 19.99mA / 0 ? 24mA; Accuracy: .?0.25%

• Display: 6000 Counts LCD. T-RMS. Auto Power Off. Flame Sensor. Current measurement. Relative Measurement. Clamp Jaw Dia: 30mm.
• AC Voltage (T-RMS): 0 ? 600mV / 6 / 60 / 600 / 750V. AC Accuracy: ?0.8%+5. DC Voltage: 0 -600mV / 6 / 60 / 600 / 1000V. DC Accuracy: ?0.5%+3.
• AC Current (T-RMS):0 ? 60 / 600 / 1000A; Accuracy: ?2.0%+30. AC Current (from terminal): 0- 600u / 6000uA; Accuracy: ?0.8%+10. DC Current : 0 ? 60 / 600 / 1000A; Accuracy: ?2.0%+30. DC Current (from terminal): 0- 600u / 6000uA; Accuracy: ?0.8%+10.
• Resistance, Temperature, Accuracy, Capacitance, Duty Cycle, Diode & Continuity Test
• To assure high accuracy and resolution, it uses an 8-bit microprocessor and a dual integral A/D convertor IC.