Paints And Coatings By Herrlich Homes

• Pre Washing - Pre washing of the substrate is essential. Make a hot water pre washing bath solution or can make a lime water bath solution for cleaning. Deep the substrate and Use cotton cloth to wipe out the moisture from the substrate.
• COMPOSITION Mixing Ratio for 100 gm SS Golden Gloss Lacquer Solution 80% Hardener 20% = 20 gm
• Surface Preparation Surface should be clean, Dry and free from oil, Grease and foreign contaminants before coating. For previously painted surface remove all unstable paint film. Loose chalk . Dust and foreign matter. Surface sanding is preferable on smooth surface. Ensure that the substrate has maximum glossy finish. It can be done by buffing
• Procedure for Spray Put the mixture in spray gun with proper filtration. Pressure bar of gun 2kpa. Hold the gun approximately 30 cm from object to be sprayed. Press level down with index figure. Keeping gunin motion from side to side so that coating is deposited evenly.