Paints - Wall Coatings Products

• WATER RESISTANT - It has excellent water resistance with a quick adhesive tendency to concrete surfaces
• HOW TO USE 1) Use patra to remove the paint from the walls 2) remove the putty till you see the plaster of the wall 3)Use wire brush to clean the wall 4)Use brush to apply water on the wall 4)Mix Dr fixit dampguard in 1 unit water,1 unit base and 1 unit hardener ratio 6) Use a brush to apply Dr Fixit
• AREAS OF APPLICATION - Internal walls, ceilings, RCC water tanks

• ANTI-BACTERIAL PROTECTION: Asian Paints Health Shield Single Coat Luxury Emulsion is an Anti-Bacterial Coating for pre-painted walls.
• SILVER ION TECHNOLOGY: Recommended
• by Indian Medical Association, Asian Paints Health Shield Single Coat Luxury Emulsion Clear Surface Coating helps keep your home germ-free.
• NO PRIMER REQUIRED: The Clear Wall Paint makes your walls glossy in a single coat and requires no primer.
• EASY TO USE: This DIY Clear Anti-Bacterial Coating for walls can be applied easily for a smooth finish, using a paint roller.

• SMOOTH SURFACE FOR PAINTING :- When applied appropriately to the walls, wall putty fills the imperfections, cracks and faults on the surface. Wall Putty forms an excellent bonding to the base concrete or plastered surfaces.
• HOW TO USE :- Ensure that the surface is totally clean. It should be free from dust, loose particles, residual paints, grease, oil or any other contamination. Wet the wall with sufficient quantity of clean water and allow them to dry before applying putty on wall.
• Mix the wall putty with a required amount in a pan and add water to it in a 2:1 ratio or as per manufacturers instruction.
• Stir continuously by hand or by an electric putty mixer for about 10-15 minutes. Mix thoroughly to get a creamy, paste-like consistency.
• Make sure that it does not create lumps while mixing. Prepare the mix in such a way so that you can use it within the next two hours.
• Weird's Wall Putty comes in Standing Pouch and Shipped using hard Corrugated box to ensure safety in transit .

• STRENGHT: Buildingshop fiber sheet for roof is made of fiber glass, it is characterized by high tensile strength, good flexibility and bending stability.
• PURPOSE: It also can be used for fiber mesh, waterproofing, fiber wall coating, plastering mesh, fiberglass cloth, the insulation of the steam pipe, gas pipe, water pipe, fence, metal architectural decoration etc.
• DESIGN FOR: It is designed to be used as a building material for waterproofing, plastering, reinforcing concrete, fiber reinforced plastic, reinforcing plasterboard, wall coating, roofing etc
• DURABILITY: Fiber mesh for waterproofing membrane has excellent durability to ultraviolet rays, weathering resistance, resistance to water, humidity, acid and alkali, anti-rotten.More importantly, fiberglass mesh is good to ventilate, breathable and can reduce indoor air pollution.
• MANAFACTURE: BuildingShop is a professional manufacturer and exporter of waterproofing materials. Our main products include bituminous waterproofing membrane, fiberglass mesh tape, fiberglass coated fabric, fiberglass mesh cloth, fiberglass mesh tape, fiberglass mesh cloth.

• USP Dr Fixit Raincoat is a waterproofing and protective coating for exterior walls of the buildings or structures
• PROTECTION UPTO 7 YEARS Raincoat is a waterproofing & protective coating for the exterior walls of the building with gives a much needed protection for a period of up to 7 years
• WATER RESISTANCE It is water resistance and provides a protective coating for exterior walls of the building
• SUPREME FLEXIBILITY AND BREATHABILITY Raincoat's coating is known for its supreme flexibility, breathability

• Damp proof paint which protects and seals roofs and foundation walls.
• Rain resistant in 2 hours.
• Waterproof paint which fills surface pores and protects against moisture penetration.
• Use on built-up and modified bitumen roofing and damp or green concrete.
• Spray grade, non-fibered.

• dry wall tapes are suitable for permanent fixing. Can be used on walls, ceramic tills & wood surface etc. That are clear, dry & smooth. For decorative purpose in car, home & school etc
• It also resists joint cracking that can occur when conventional fibre glass mesh tape is used.
• Permanently Hides Jionts ,Cracks And Holes
• Ideal for patching Use Fibre glass Drywall Tape to easily patch small holes and cracks in drywall and plaster walls and ceilings.
• Fibre glass Drywall Tape is made with a unique cross-fibre glass construction to provide greater drywall joint strength than conventional fibre glass mesh tapes. Fiberglass Drywall Tape resists shrinking, tearing, stretching and distortion

• USP Dr Fixit Raincoat is a waterproofing and protective coating for exterior walls of the buildings or structures
• PROTECTION UPTO 7 YEARS Raincoat is a waterproofing & protective coating for the exterior walls of the building with gives a much needed protection for a period of up to 7 years
• WATER RESISTANCE It is water resistance and provides a protective coating for exterior walls of the building
• SUPREME FLEXIBILITY AND BREATHABILITY Raincoat's coating is known for its supreme flexibility, breathability

• Good chemical stability. It is resistant to alkali, acid, water, cement erosion and other chemical corrosion; it has strong binding force with resin
• ?Wall Reinforcing Material (such As Fiberglass Wall Mesh, Grc Wall Panel, Eps Internal Wall Insulation Board, Gypsum Board, Etc.)
• ?Enhance Cement Products (such As Roman Columns, Flue, Etc.). Granite, Mosaic Net, Marble Back Net
• ?Protects The Surface from Cracking and Improves Its Mechanical Strength
• ?It also can be used for fiber sheet for roof waterproofing, fiber wall coating, plastering mesh, fiberglass cloth, the insulation of the steam pipe, gas pipe, water pipe, fence, metal architectural decoration etc

• INSTA FLEX WHITE is a waterproofing and protective coating for exterior walls and terraces of the buildings
• Highly elastomeric, flexible and UV resistant
• Coverage: 15-20 sqft
• Protection of over 7 years from water penetration
• Can be applied on all kinds of surfaces like concrete, tin shed, GI sheet, Asbestos, wood, plastic, etc.

• Selected high quality aluminum alloy materials, sturdy and durable, corrosion resistant.
• It can be used with oil, solvent and water based materials to facilitate coating.
• Accuracy processing can be used for coatings with different viscosities and different textures.
• The spray volume of paint is 270ml/s, which is widely used in furniture, ships and machinery.
• With easy to grip trigger handle, it is comfortable to hold, easy to operate, and does not fatigue after long term use.

• USP - Dr. Fixit Primeseal is high opacity primer for wall coating and provided excellent efflorescence resistance due to its chemical inertness
• BINDER- Good binding of chalky or porous substrates and over coating
• PRIMER Used as a primer on internal and external surfaces like walls, terraces, roofs
• EXCELLENT SUBSTRATE ADHESION - Provides deep penetration thus imparts excellent substrate adhesio
• Dr. Fixit Newcoat Ezee is Fibre reinforced acrylic waterproof coating for roofs and terraces
• COVERAGE: 2.25 sq.mtrs. per litre per coat. Two coats are recommended.
• Form of Chemical - Liquid
• Pack Type - Plastic Bucket

• Beautifully handcrafted from 100% recyclable premium quality steel and finished with epoxy powder coating.
• THE INDIAN DECOR INLINE FLOATING wall shelves are wall mounted shelves for the home or for the office.ONE SHELF PER ORDER
• Dimensions: 15 cm deep, 45 cm wide and 5 cm high.
• Available in Black ; 1 Shelf per order

• USP - Dr. Fixit Dampguard Classic is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, with additives in water as a medium
• WATERPROOFING OF WATER TANKS Dr Fixit Dampguard Classic is a ?Potable water safe coating for waterproofing of water tanks
• INTERNAL WALL DAMPNESS RECTIFICATION- Dampguard Classic can be used to rectify internal wall dampness
• ANTI-MICROBIAL & ANTI FUNGAL - It is used as an internal coating for the waterproofing & treatment of water tanks by providing anti-microbial & anti-fungal properties
• WATER RESISTANT - It has excellent water resistance with a quick adhesive tendency to concrete surfaces

• Strong and flexible mesh
• The alkali-resistant coating is very important, it must be strong, the yarn is not easy to move
• It also can be used for fiber sheet for roof waterproofing, fiber wall coating, plastering mesh, fiberglass cloth, the insulation of the steam pipe, gas pipe, water pipe, fence, metal architectural decoration etc.
• FibreGlass Mesh For Waterproofing

• 3 years Waterproofing Performance for Horizontal and Vertical Surfaces
• Ideal for Fresh Painting and Repainting of masonry/concrete surfaces
• Upto 1 mm crackbridging ability
• SunReflect Technology helping in surface temp reduction upto 5 deg C for Roof and Vertical Walls with Dulux Weathershield Topcoat