Welding Machines Products

• Suitable for most oxygenated fuel equipment using 9/16b attachment
• Maximum working pressure: gas 28PSI, oxygen 142PSI
• When the torch quick connection is disconnected, the check valve will prevent gas backflow
• Oxygen Fuel Quick Connection Regulator hose coupler sets are made of high quality brass and stainless steel materials and have been rigorously tested to ensure a tight seal
• We are committed to providing durable, stable, and easy to install oxyacetylene torch quick connection kit, to ensure your good use experience

• WELDING CURTAIN - Jackson Safety's Transparent Welding Curtain decreases total light from the welding arc and is ideal when visibility and light reduction are necessary
• KEEPS YOU SAFE - Provides UV and blue light protection, injury prevention, clear division, and minimizes noise to help keep you safe and productive; Creates a containment barrier that allows for more efficient fume and vapor extraction
• EASY INSTALLATION - Built-in grommets makes it ready to hang (tubing or framing not included); Grommets are 8? apart on one width side and 16? apart on both height sides; Actual size may vary up to 3? in width and height
• DURABLE - PVC material resists tearing; Flame, mildew, and water resistant
• MEETS STANDARDS - Meets ANSI/FM 4960, California Fire Marshall standards, and NFPA 701 requirements for flame resistance; Not intended for use in lieu of visors, goggles, eyewear or welding helmets

• Dual Voltage, 3 In 1: This HBM1200 is 220v MIG welder, with Lift TIG, ARC(MMA) / MIG 3 in 1. Note: TIG torch is not included. Go with 0.8/1.0mm flux core wire perfectly, ideal for welding carbon steel, iron or stainless steel
• Easy Control, Excellent Weld: The panel of 3 in 1 welder is very simple which make it much more easier to operate. Mig welders has adjustable wire feed speed and power settings, you can adjust it to suit your application. Its arc is smooth that bring you a decent job
• 60% Duty Cycle, Longer Lasting: Hitbox HBM1200 welder machine has a rated duty cycle of 60% at 120 amps. With this feature, it ensure this MIG welder will last a longer time, more efficient
• Overload Safety Protection: Hitbox MIG welder come with a safety feature where the welder is automatically turned off when it it too hot or the voltage and current exceed their range. There are fans helping to cooling the flux core welder when working
• Buy With Confidence: This mig welder machine 220v tiny and light enough to move in any workplace. HITBOX provides caring after-sales service. HITBOX provides 2 years quality support, and any problems encountered will be answered by professional staff for you

• Specially formulated to operate with small 208/230 volt AC welders
• 70,000 PSI tensile strength
• A low-hydrogen electrode for use in all positions on low, medium and high-carbon steels

• Welders clothes set, easy to wear and take off, heat and flame resistant.
• Application: electrical welding, cutting, casting, lathe, steel, smelting, aluminum foil, and it can be used as work, bbq, grilling, woodworkers, garage welding clothes set.
• Pockets is used for tools and work accessories. It can be applied in welding, splash proof, heat resistant and other safe workplaces.
• size Chart:Top Length: 75cm/29.53 inchShoulder Width: 55cm/21.65 inchSleeve Length: 60cm/23.62 inchPants Length: approx.108cm/42.52 inchWaist: 3 feet/39.37 inchSuitable Height: 170-180cm/66.93-70.87 inch
• Color of the item might be slightly different from the
• Material: Cowhide
• Kindly Refer The Product Description Before Buying The Product.
• Package Includes:1 Set Welding Clothing

• Tig Torch Type :Welding Knight Air-Cooled 150Amp WP17V with 13 Feet (4m) Cable - complete TIG welding torch kit, 35% DC 140Amp, 35% AC 125Amp, Quick Plug Connector: 10-25mm?, Electrode Size: 0.5-2.4mm.
• Great Compatibility :Welding Knight TIG17V welding function is for thin to medium workpiece welding or stainless steel welding. It is equipped with a quick plug connector: 10-25mm? & Premium quality with 5/8 gas power hose connector. It is compatible with most mainstream welders on the market. For example, MT2000, MIG200, etc.
• Durable Material :Rubber body can provide improved resistance to breakage in rough duty, Hard body can provides superior heat and abrasion resistance for longest life.
• Ergonomic Design :This tig welding torch handle using ribbed design, providing excellent feel, to a certain extent to relieve the operator's fatigue on long working hours, it makes welding work easier.
• Package :1 * TIG Torch, 3 * Collets, 3 * Ceramic Cups, 1 * Collet Body (10N32 2.4mm),1 * Long Back Cap,1 * Short Back Cap. ( Note: Parts are not installed on the torch, they are packaged together as an accessory kit )

• Lightweight and portable, stable and reliable, wear resistant and can provides long service time.
• Through the MOS tube output, this energy will be concentrated at the end of the welding pen, and it will be heated by short circuit.
• Fuse the nickel sheet firmly with the battery.
• And it is precisely controlled by the single-chip microcomputer program without trigger switch.
• Adopt screw fix, more stable and more reliable.

• The rotating construction can be welded at multiple angles to reduce the difficulty of work.
• The connection and replacement is simple and convenient, the operation saves time.
• Great workmanship, perfect replacement for the old one.
• The easy one-handed operation allows the operator to reduce fatigue.
• Small, easy to carry and store, convenient to use and with good performance.

• -Material: Our latex balloon inflator regulator is made by durable brass and rubber, enough to use in a long time.
• -Specifications: Inlet Thread: CGA580, Gauge measuring range: 0-3000PSI.
• -Features: Easy to read pressure gauge, it can fill both mylar and latex balloons (with auto shut off for foil balloons). For CGA580 Tank Valves outlet thread (this is the typical Helium and Hydrogen valve for most tanks)
• -Easy to Use: Just need to connect it by hand, no wrench needed.
• -WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USE.

• This goggles and collet kit fits all 17 and 26 series air-cooled torches and 18 series water-cooled torches, including Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17, DB18 and DB 26 torches, and welding Process WP-17, WP-18 and WP-26 welding guns.
• Fine craftsmanship: precise manufacturing makes it perfectly integrated with the machine, durable, simple and easy to use, perfect welding experience.
• Package Including: 3 pcs Back Cap+10 pcs TIG Collet+10 pcs TIG Collet Body+10 pcs Alumina Ceramic Cup+10 pcs Collet Body MEDIUM Gas Lens+12 pcs Alumina GAS Lens Nozzles.
• The insulating rings not match the CK Torch.
• If you have any questions during use, please feel free to contact us and serve you wholeheartedly.

• quality Pure Tungsten Electrodes,contain 99.50% tungsten
• Color code: Green
• Suitable for AC welding ,Corresponding materials aluminum, magnesium, and their alloy
• Tungsten electrode size:1/8" x 7" or 3.2mm x 175mm 10pcs inner one Box
• AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance

• Includes Knob Handle and Hardware
• Includes HD Switch Dust Shield Protective Grommet System
• Same Day Shipping Until 12:00 Noon EST

• High quality Pure Tungsten Electrodes,contain 99.50% tungsten
• Suitable for AC welding ?Corresponding materials aluminum, magnesium, and their alloy
• ELECTRODE SIZE: 1/8? x 7" or 3.2mm x 175mm
• 10pcs inner one Box
• AWS Specification: EWLa20 Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848 EN 26 848