Welding Machines Products

• ARC WELDING MACHINE
• ANTI STICK FUNCTION, HOT START
• IGBT TECHNOLOGY
• DIGITAL DISPLAY, ARC FORCE KNOB, ADJUSTABLE CURRENT
• INCLUDES WELDING MASK, SHIELD GLASS AND HAMMER BRUSH

• Professional welding machine comes with Copper-clad Aluminium Electrode holder with welding cable 2m x 14mm? , and 1m x 14mm? Earth Clamp Cable. Electrode usable: 1.6mm to 4mm
• Compact design with Carrfor indoor and outdoor operations. Its over and low voltage (170V-250V) protection, overheat Protection, over load protection designs ensure you are safe when you use it
• This Insulate Gate Bipolar Transistor (IGBT) welding machARC welding. 20-200A Adjustable ControllerI Auto ARC Force. Anti Stick Function
• Rated Input : 5.8 Kw. Insulation Class: F. Protection Class : IP21. Hot Start. IGBT Protection System. Smart Cooling Fan for Thermostat
• Comes with 2M power cable ; 1x Carry belt; 2x protection glass with 1x face protection cover; Hammer With brush; Electrode holder, Heavy earth clamp.

• Arbor Size: M10
• Maximum Speed: 11000 RPM
• Cordless: No
• Wheel Diameter: 100 mm

• [SPECIFICATION] Rated voltage : 220V?15%, 50/60Hz, Input Capacity : 4 kW, Input Current : 23.5 A, No Load Voltage : 65 V, MMA Output current : 20-140 A, MAG Output current : 40-140 A, Usable electrodes : 1.6 ?3.2 mm , MAG Flux cored wire : 0.6/0.8/0.9 mm(1kg)
• [DUAL OPERATION] The welding machine can be operaMAG (Metal Active Gas). 1.MAG with Flux cored arc weldarc to fuse base metal in the weld joint area. 2.In MMA, with consumable, flux-covered electrodes and a ground clamp, a shortpiece.
• [IGBT TECHNOLOGY] The machine uses a high performance IGBT Technology, which is very useful as it gives power that can be used for different welding processes.
• [FEATURES] Hot Start provides excellent arc ignition without the electrode sticking and avoiding any metallurgical default in the weld. Its Anti-sticking feature minimizes the short circuit current in the event of the electrode sticking to the work piece. In-built VRD(Voltage Reduction Device) function provides an additional measure of safety. In-built Arc force improves the weld performance on the specified size of electrodes to be used, making the job easier.
• [ACCE16mm? 300A Electrode Holder, 2m-cable 16mm? 300A Earth Clamp, 3mMAG Torch and 1 Kg Flux cored wire

• SUPPORT WEIGHT - 20 Kgs, DIRECDESIGN FOR MORE STRENGTH
• CLAMPING ANGLE FOR WELDING 30?, 40?,60?, 75? and 90?
• MAXIMUM OPERATING TEMPERATURE 250 ?C
• MATERIAL: STEEL SHEET
• Magnetic squares for welding which leave both hands free; magnetic welding holder for spreading, etc.

• Product features: Independent 5 LED lighting design, adjustable light and angle freely
• It can connect external power source or 3 x AA battery
• There are 2 assist-magnifying glasses, 31 mm 7.5
• Equipped with auxiliary clamp, easy to adjustable circuit board

• Package includes: 2 x 35-50mm? Cable Connector Plug 2 x 35-50mm? Cable Connector Socket
• All pictures shown are for illustration purpose only.Actual product may vary due to product Enhancement CATEGORY TYPE:Welding & Soldering Supplies
• Material: Brass
• LOWER ENERGY CONSUMPTION
• High Quality, Long Life Efficiently Working Device

• Professional welding torch for commercial or occasional use
• Model : 36 KD fit for 400 ampere MIG Welding Machine, Wfor 0.8mm to 1.2mm wire
• Pure Copper Cable : Made of pure copper oxygen-free cable which makes sure the welding be safe, CNC integrated processing, optimal pure brass copper
• Ergonomic Handle : The handle has a good clean ergonomic design, so it fits in your hand better than the OEM gun
• Anti-Folding Spring : You can see th high strength plastic spring in the handle and where the gun plugs into the machine, which offers a much better support system than the OEM gun.

• Sunlight Resistant & Water Resistant
• Specially packaged
• Highly flexible
• Ships as two hand coils in poly bag
• Made in India

• Body Made Of Full Brass Forged
• Upper Body Made Of Thermo Plastic
• Mini Electrode Holder ,Light Weight,Easy To Handle
• Easy To Use,Requires Low Maintenance And Less Energy Consumption
• 1000 Amp

• Rated voltage : 220V?15%, 50/60Hz
• Input Capacity : 10.8 KVA; Input Current : 49 A
• No Load Voltage : 45 A; Max Current : 200-220A (Power Boost:250A)
• Usable elec: 5.8 KW
• Protection Class : IP21S

• Digital thrust anti-stick design, can arc instantly, will not stick to the electrode.
• The smart chip automatically recognizes and matches the welding rod, the welding operation is simple, and the use is convenient.
• With the current and thrust adjustment knob, you can adjustable the current and thrust through this knob. Small in size and easy to carry, you can take itto use it.
• With high efficiency heat dissipation deproSuitable for the 2.5, 3.2mm electrode, it can works continuously, with high efficiency.
• Package included: 1 x Electric Arc Welding Machine 1 x Ground Clamp 1 x Bag

• [SPECIFICATION] Rated voltage : 220V?15%, 50/60Hz, Input CapacitLoad Voltage : 45 V, MMA Output c5 -200 A, Usable electrodes : 1 to 5 mm, Protection Class : IP21
• [DUAL OPERATION] The welding machine can be operaTungsten Inert Gas (TIG). 1. TIG welding uses a non-consumable tungsten earea and electrode are protected by an inert shielding gas (argon). 2. In MMA, with consumable, flux-covered electrodes and a ground clamp, a shortpiece.
• [IGBT TECHNOLOGY] The machine uses a high performance IGBT Technology, which is very useful as it gives power that can be used for different welding processes.
• [FEATURES] Hot Start provides excellent arc ignition without the electrode sticking and avoiding any metallurgical default in the weld. Its Anti-sticking feature minimizes the short circuit current in the event of the electrode sticking to the work piece. VRD (Voltage Reduction Device) in-built function provides an additionalimproves the weld performance on the specified size of electrodes to be used, making the job easier
• [ACCESSORIES] The package includes Electrode Holder, Earth Clamp, TIG Torch, Tungsten needles, Collet, Back Cap and so on.

• MULTIFUNCTIONAL WELDER - HITBOX MT2000?welder is MIG/ARC/LIFT TIG gas gasless multi Functions. It came with color LCD display with make the setting parameter vconvenient to chose the welding mode by pressing the ?Selection? button. Once choosing the mode you need, the mode will light up with its matching color.
• MIG FUNCTION - HITBOX MT2000? welder supports gas, mix gas and gasless function. This welder can work with 0.8/1.0mm welding wire to weld 1mm-8mm thickness workpiece. When adjust the current, the wire speed anLittle splash, deep bath and smooth wire feeding bring you beautiful welding seam. Solid wire with gas welding stainless steel. Flux-cored wire without gas welding iron and carbon steel.
• LIFT TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten to weld 1- 6mm thickness. Can weld stainless steel. If you need to use lift tig function, a WP-17V tig torch will be needed. Pleasnot included in this package.
• MMA FUNCTION - Current 22 ~ 185 amp. Can weld 2.5/ 3.2/4.0mm electrode. It easy to strike an arc, little spatter, stable current, and good performance.
• 1 YEAR HITBOX welder offers good warranty. If the machine can not work have other problem when working, please contact us at the first time, we can help you to fix it and we have agent in the United StaIfwe will send you a new replacement.

• TItechnology and great features. Ideal for high frequency DC TIG and MMA welding.
• HF Start-easy arc starting and improvers tungsten life, Fan cooling system, Compact portable design and light weight
• Suitable for welding different metals such as steel, stainless steel, nickel alloys, coppefor welding aluminum)
• Over-voltage protection,under voltage protection,over current protection,over load protection.