Wire Straightening & Cutting Machines Products

• MULTIFUNCTIONAL: This combination square tool is plines, draw parallel lines, lay out, calibrate, measure router bit depth, set table saw blades.
• ADJUSTABLE: The combination square tool has small, metal ridges that the rule rests against which can be filed down (very carefully) on either side of the screw to adjust the angle.
• QUALITY: Matte finished with excellent stainless steel blade that makes this combination square will never rust or corrode, not easy to break. Perfect for 90? and 45? marking.
• DETAILS: Both sides of the 12inch square ruler are available. And measurements on the ruler are clear and easy to read, etched in nicely. It certainly does lock the blade firmly. With precision-etched scales thatand precise.
• DESIGN: Compared with traditional rulers that just for measuring, this multifunctional ruler meets your various needs that is helpful in most building or construction situations where a right angle and level are needed.

• The hammer drill kit contains 120 pieces including hammer drill, drill bits, screwbit holder, hammer, measurement tape, utility knife, universal plier, Lineman tester, Allen key set, interchand other tools
• The light-weight, compact & ergonomic tool design provides a high level of precision, control and consistency to the task at hand and mitigates the risk of injury
• The hammer drill contained within the kit is powered by a 600 W tool motor with dual modes for drilling & hammering and forward/reverse switch for both clockwise & counter-chas several tools for precise measuring, fastening and maintenance applications. It includes hex keys for fastening hex bolts, universal pliers, measuring tapes and precision drill bits.
• The auxiliary accessories are i- Includes a set of tools and accessories such as screws, plugs, utility knife and a claw hammer, all provided in a rugged tool box
• The product is manufactured by Stanley Black & Decker with registered trademarks of Stanley, Dewalt & Black+Decker
• 1 Year warranty offered on the product from the date of purchase

• 30 different head style
• Colour: Yellow-Red
• Rubber Shockproof gripped handle
• handle.
• handle.

• The product is a compact, lightweight and perfect hand tool kit for household DIY tasks & emergency maintenance.
• BLACK+DECKER BMT126C Hand Tool Kit (126-Piece) contains: 1 pc 10inch Hand Saw with Carbon Steel Blade 10 pcs Bit Set Bits size: slotted: 1/8 3/16 1/4 PH: ph1 ph2 Torx: T15 T20Hex: 1/8 5/32 Adapter 1 pc 9LED Torch light 4 pcs Precision Screwdriver Size: PH1,PH0, slotted 1.6mTape 1 pc 8 Adjustable Wrench 8 pcs Hex key :1.5-2-2.5-3-4-5-5long Nose pc Bit Handle with A3 steel 2pcs Screwdriver PH2x100mm ,SL6x100mm 1 pc 140mm Tester 1 pc 18mm11 12 13mm with Carbon Steel 82 pcs Hardware
• Compact DIY Kit Box - This DIY kit box has been skilfully developed with a stylish and compact design. Additionally, it is incredibprovides a good assortment of tools for all household DIY tasks.
• Types of Screwdrivers - PH2 x 100mm and SL6 x 100mm are useful in fastening or un-fastening screws. Whereas the other type- PH1, PH0, slotted 1.6mm, 2.0mm is useful in fastening or un-fastening the screws in electronic gadgets.
• Pliers - Both the nose plier and combination plier are highly durable and can be used for gripping, cutting and stripping of wires.
• The claw hammer comes with a sharp claw for easy nail rema soft grip for ling time usage
• The 10-inch hand saw with carbon steel blade can be useful in cutting/sawing small to medium sized materials.

• Material: Plastic, Color: Blue
• Item Dimension: 295mm x 300mm x 90mm
• Package Contents:1 insulation tape, 1 cutter, 1 wrench, 1 Electroprobe, 1 torch light, 1 hand screwdriver, 1 masonry drill bit, 1 combination plier, 1 measuring tape, 10 pcs of screwdriver bits, 1 Hammer, 8 pcs of Precision bits, 20 Doweis applicable on this product
• Compact
• Multi-purpose kit
• Now take an advance step for household repair work with an apt Bosch tool set

• Incorporates features of framing square, tri square, mitre square, and protractor square
• Sturdier than typical L-shaped framing squares
• 3/16" thick aluminum alloy
• Includes book of rafter lengths and roof construction
• 25x18 cm triangle measurement scale

• 6 months from the date of invoice (Provide invoice copy to claim warranty, Accessories not covered under warranty).
• Drilling diameter: 10 millimeters for concrete and masonry; 8 millimeters for steel; 20 millimeters for wood
• Material: MS and Plastic
• Power: 500 watts (Input) and 250 watts (Output)
• Chuck capacity : 1.5 - 10 mm Chuck . Customer Care No: 18004258665

• Car Handle may make it easier to get in and out of your vehicle
• Car Handle fits into the vehicle's door latch toconstruction can hold 350 lbs Built-in Emergency Seat belt Cutte
• Reliable performance
• leverage and stability.

• Handle Diameter:30 mm
• Dimensions:Total length=310 Km
• Weight:0.36 Kg
• Shaft Type:4 Groove

• Shaft 15% longer for better balance and control
• Soft grip ergonomic handle for comfort and grip
• Fustrength,durability and safety
• Hardened and tempered tubular steel shaft for strength
• Flock filled rubber grip for comfort and durability
• 5 Tonne force fit heah to handle assembly for imrpoved safety
• Seamless,oval,tubular steel shaft for strength and balance

• Color: Yellow and Black, Material: Plastic and Sturdy Steel
• Jaws and Cutting Edge are Induction Hardened & Tempered
• Black phosphate finish anti-rust protected
• Anti-rust Protected
• Shaft 15% longer for better balance and control
• Soft grip ergonomic handle for comfort and grip
• Fustrength,durability and safety
• Hardened and tempered tubular steel shaft for strength

• Rated voltage : 230V~50Hz
• Chuck capacity : 10 mm; Drilling capacity : Wood-15mm Steel-10mm, Concrete-10mm
• Weight : 1.35 Kg
• Protection class : Class II

• [Made of stainless steel material, which has the charactand has a long service time.
• [Easy for the electric circular saws to install and remove, you can finish the process quickly and easily.
• [The design with three pulleys on one sidor pull more smoothly and give you a better use experience.
• [Easy to operate: When using, the steel wheel and the porcelain drill gaps should match, and then push the electric circular saws to effectively cleans the tile gaps.
• [Compatible with multiple types cutting machines and has a wide applications.
• Warranty not applicable for this product

• Electro-inductive hardened steel, smoothed, lacquered w/ polished striking faces and blunt edges.
• Heavy Duty, Anti-Corrosive plated 16oz/500 grams head is built for dependabilitymatter the condition.
• Anti-vibration fiberglass handle provides a firm, non-slip grip to allow for superior driving and impact absorption.
• Head-to-handle joint design is a non-detachable epoxy resin that remains resilient to wearing.
• Manufactured by WULF Tools Ltd - The name that spells supreme quality, top-notch durability and highly satisfactory tools that deliver optimum results.

• Suitable for jaquar type models (please check photos and dimension)
• Size: 32 mm 1.25"180 g Height:100 mm Corrosion resistance and Robust construction
• Jaquar Type Metropole Flush Valve Kit