Electricals - Exhaust Fans Products

• PREMIUM QUALITY- The exterior wall vent hood is made of stainless steel material, which is anti-rust and anti-corrosion?preventing sun damage and cracking like plastic vent cover.
• FINE MESH SCREEN- The mesh screen on the vent cover can keep out birds and rodents from entering home.
• WATER DEFLECTOR PLATE- There is a water deflector plate on the bottom of the vent cover. The airflow direction of the air outlet is away from the external wall with it, making the wall less prone to stains.
• EASY INSTALLATION- Just inserting the vent hose into the louvered vent cover, then you only need to mount it on the wall. Just minutes to do that, also easy to remove and clean.
• FIRM RETAINING RING- There are three retaining rings at the socket of the air vent cover to reinforce and prevent falling off.

• Material: High quality stainless steel
• Small Diameter: 2.25 ID (Fits over 2 1/4 OD Pipe)
• Large Diameter: 2.5 ID (Fits over 2 1/2 OD Pipe)
• Length May Vary: Approx. 3 3/4
• Metal Thickness May Vary: Approx. 1/16''

• MaterialThe 4 inch backdraft damper and the flap leaves is made of a Galvanized steel, the Axis are made of aluminum, while the spring are made of carbon steel.
• Installation methodThe position of the spring should be horizontal for horizontal installations so that it can open and close optimally
• Wide applicationsBack draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications.
• Lightweight valve wingsThe valve wings open under the pressure created by the airflow; when the air flows in the opposite direction, it is automatically closed under the action of the spring, so as to cut off the flow.
• Backdraft ShutterHon&Guan Draft Blocker designed to improve ventilation by preventing air from re-circulating when the fans are not in use, rubber ring ensure 100% closure and quiet closing.

• Exhaust Manifold Gasket 420931481 290931480 290931481
• Exhaust Pipe Gasket 290931500 420931503 290931503
• Rave Valve Gasket 420931540, 420-931-540, 290931540,290-931-540
• Aftermarket exhaust gasket kit set,provide a nice tight seal for an exhaust install
• Compatible with Sea Doo Jet Boat: 1996-1998 Challenger Exhaust Gasket Kit; 1997, 1999 Challenger 1800 Exhaust Gasket Kit

• What you receive2 inch wide and 17 feet long titanium exhaust wrap header wrap with (pack of 4) 12" Stainless Steel(304) Locking Ties. The Locking Ties is wrapped in the product. Please open the package to see it.
• RELIABLE MATERIALBasalt refractory superior to cheap colored fiberglass tape. Titanium heat wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability.
• High QualityThe heat resistant exhaust tape can withstand 1800F direct/2500F radiant heat. Thermal heat wrap reduces heat under hood up to 50%. The heat shield tape protects drivers and mechanics from burns and improve car and motorcycle performance.
• MULTI USEThermal insulation and fireproof ribbon can be widely used in a variety of scenarios, such as firewood burning stove, exhaust pipe, heat wrap for water pipes, power line, etc.
• TipsBefore installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless ties to secure the ends in place.

• Package Contents: 4 inches in Diameter x 5 FEET(About 1.5 meters) Long Air Ducting, including 2 Stainless Steel Clamps.
• Flexible 4 Layers Material: The Dryer Hose is made of 4 layer Thickness.The PVC film help to be light-proof and noise reduction.
• Fire-Resistant Air Duct: Dryer exhaust hose is fire-resistant.And the temperature range is from -30 degree to 150 degree.
• Easy to Install: Use the screw to tighten the hose and clamps,the air ducting is flexible to bend with any angle.You may cut the length of ducting as you need.
• Wide Application: The Ducting Is suitable for HVAC system. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moisture Exhaust), Dryer Rooms, Grow Tents and other applications etc.

• Premium 304 Material: Flat air vents is made of high quality 304 stainless steel; 304 stainless steel is much better than 201 material, sturdy durable, anti-aging and corrosion resistant.
• 45 degree Louver Design: The Air Vent grille cover is designed a round flat cover with 45 degree Louver to prevent rainwater from flowing in; and the air vent built in fine mesh grill to stop sundries and small pet from entering the house.
• Air Vent Size The vent inner diameter is 104 mm/4.1 inch, outer diameter is 115 mm/4.5 inch, height of cylinder is 40 mm/1.6 inch; 120mm / 5 inch flat air Vent ventilation grille cover applied to 5inch circular ventilation equipment or ducting hose.
• Easy to Install: Package includes 2PCS flat air vent, installed by inserting the mouth into the ceiling or wall, and then use two screws to secure the air vent, also very easy to disassemble for conveniently cleaning; Please pay attension the edge, It is recommended to wear gloves to avoid scratching during installation.
• Widely to Use: The flat louver air vent is ideal for room exhaust and ventilation use, suitable for kitchen, bathroom, garage, flats, office.

• Three Layer Construction: Aluminum Foil + PVC + Aluminum Foil, reinforced by built-in steel wire, long lifespan
• Flame-retardant coating, high temperature and corrosion resistant, temperature range from -30 to 80
• Each air duct hose comes with 2 stainless steel clamps which can be tightened around the tubes easily
• Steel-wire spiral structure, flexible length and can be cut short for different applications, easy to install to any place
• Designed for ventilation applications for grow tent, air conditioner, kitchen, bathroom, attic, basement, dryer, etc.

• Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction
• Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally
• One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off
• Material: The 4 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 degree F
• Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation

• PACKAGE CONTENT- You will receive 4PCS 6 Inch ventilation ducting connector, enough to meet your daily use and replacement.
• HIGH QUALITY- The duct connector flange are made of high quality ABS plastic, and it is perfectly designed for DIY and trade, compact and solid. Black, simple and stylish.
• EASY TO INSTALL- Easy installation, compatible with 6 Inch tube, it need to pre-bored holes to ensure easy and secure mounting to wall, ceiling or any other surface.
• WIDELY APPLICATION- Great for connect your extractor fan, bathroom fan, kitchen exhaust fan, in-line extract fan and cooker hood or any other indoor outdoor heating cooling pipe.
• GUARANTEE- If you have any questions about this product, please feel free to contact us and we will solve the problem for you immediately.Note: This product has a diameter of 5.7 inches and is suitable for use in a 6-inch exhaust ventilation duct.

• A ducting cone designed for adapting ductwork to equipment like bathroom fans and dust collectors.
• Maintains airflow efficiency by creating a connection between two different sized duct openings.
• Raised lips on the smaller opening for extra grip on ducting or your equipment's duct opening.
• Characteristics: Simple design, ABS plastic rigid catheter is very suitable for DIY and industry use.
• Adapts 6 inches to 4 inches | Product Length: 5 inches | With 2 Sealing rings.

• Function: The Apeixoto exhaust tailpipe tip is used as a a protection to your vehicles exhaust pipes with an outlet diameter of 4 inches. It will protect your exhaust pipe from rust and corrosion under sunlight and rain.
• Dimensions: The Apeixoto exhaust tailpipe tip has a standard 4 x 6x 15 dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 4 inches outlet diameter exhaust pipes.
• Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion.
• Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes.
• Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists.

• Package: There are two pieces of double wall slant cut exhaust tips in the package.
• Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5 x 4x 9 dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes.
• Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look.
• Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better.
• Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists.