Pipes - Pipes & Fitting - Composite Products

• Material: Plastic,
• Package Contents: 1-Piece Flushing Cistern
• 10 years
• GROHE ecojoy?technology for less water consumption and perfect flow in your flush system Comes in 3l and 6l flush for optimum water use
• Water supply from left/right/back or top inlet
• GROHE quality: Performance and precision in every detail
• Angle valve and push fit flexible hose union for easy installation
• Allows for flush plate to be installed vertically or horizontally

• -1/4" Female NPT
• -Easy To Use
• -Anti-marring
• -Heavy Duty Composite Body
• -Steel Inner Construction

• Heavy Ball Valve for Household, Agriculture and Industrial Purpose
• Fully Tested Under High Flow of Water
• Long Life Product[ Premium Quality]
• Quality That You Can Trust
• Designed for Heavy Water Flow
• Make sure you chose the right category ( thread mean there are screw thread inside and plane means there is plane surface inside the ball valve.

• Material:PVC
• Size:4 inch
• Smooth Internal Surface:- Absence of scaling, pitting and leaching ensures smooth and full bore flow, with no water pressure loss and noise.
• Fire Resistant:- They come with an integral flame-retarding property, with a very high Limiting Oxygen Index (LOI) of 60, and thus, cannot support or sustain combustion.
• Suitable for carrying drinking water:- Are of food grade (heavy metal free), supported by certificates from CFTRI, CIPET and RoHs (TUV). Perfect for external use. # Can be installed outside the building and can withstand temperature up to 60 C. Are made of UV-resistant materials, ensuring that they do not lose their mechanical properties even under greater exposure to sunlight.

• The exterior of the pipe plug is glossy and burr - free, compressive and anti - aging, and the air pipe connection is effortless.
• Made of high - quality plastic material with good abrasion resistance, and the pipe joint can be rotated at will after it is connected.
• The air tube is fast - connected with this 1/4 plug, and the size is standard, which can be tightly connected without air leakage.
• There are a total of 100 pneumatic connectors, sufficient in number, and convenient to replace old or damaged parts.
• With good sealing performance, can withstand atmospheric pressure after installation, and is not easy to detach.

• Good Quality brass, food grade silicone O-ring
• For connecting threaded pipe and aluminum pipe.
• The use of advanced casting mode, the product more solid and beautiful
• Good sealing, easy installation and maintenance, safe and reliable work
• For cold water piping systems, indoor gas pipeline systems, solar air conditioning piping systems.

• Material: brass, Finish: Chrome plated
• Package content: Angle Valve Stop Cock along with wall flange (Cp. Cap)
• This Angle Cock is normally used water closet or seat area with provision to attach jet spray/ health faucet or flush tank
• Chrome plated solid brass. 0.3 to 0.5 micron chromium plating, casting: 100% virgin brass ingots certified for 63% copper to ensure flawless casting a good ceramic cartridge lets you conveniently open or stop water flow from the spray head
• Care instruction: Do not use acid/detergent agents to clean the surface. Use plain water only to clean the surface of your fittings with a soft cloth

• Type:12MM Od x 1/2" NPT Thread Push to Connect Fittings; Body Style: Male Straight
• 12MM Pneumatic Pu Connector 1/2 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing)
• Brass Pneumatic connector 1/2 Air Fittings Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg
• Pneumatic Air Tube 1/2" od Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60 degreeC | 32?140 degreeF
• Push to connect air fittings 1/2 is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility

• Cost effective and easy to install:- Are lightweight and cost effective, with low maintenance, labour and shipping costs. # No electric/heat source is required for installation. # A simple cutter, chamfering tool and CPVC solvent are the only requirements for 100% leak proof jointing.
• Smooth Internal Surface:- Absence of scaling, pitting and leaching ensures smooth and full bore flow, with no water pressure loss and noise.
• Fire Resistant:- They come with an integral flame-retarding property, with a very high Limiting Oxygen Index (LOI) of 60, and thus, cannot support or sustain combustion.
• Suitable for carrying drinking water:- Are of food grade (heavy metal free), supported by certificates from CFTRI, CIPET and RoHs (TUV). Perfect for external use. # Can be installed outside the building and can withstand temperature up to 60 C. Are made of UV-resistant materials, ensuring that they do not lose their mechanical properties even under greater exposure to sunlight.
• Resistance to chemicals, corrosion and abrasion:- Do not break down under the harshest of water and service conditions. # Can be buried directly under concrete slabs as they don't react with concrete. * Energy-Efficient:- Are self-insulating with lower thermal conductivity. Built for tough conditions with minimum offsets/ looping. *Antimicrobial:- They retard microbial growth and are also suitable for aggressive water with pH levels of less than 6.5.

• Operating Voltage - 12V DC
• Pressure - 0 to 7 Bar
• Seal Material - NBR
• Valve Material - Nylon
• Position - Normally Closed
• Operation - Semi lift diaphram type
• Operating Media - Water / Oil / Liquid /Gas
• Operating Temperature - -5 Deg C to 90 Deg C
• Actuator - Electromagnetic

• Convenient Threaded End: Each connector features a 1/2" threaded end, simplifying the integration process into your pneumatic setups. This ensures secure and dependable connections within your system.
• Versatile Tubing Options: This connector set covers a range of tubing sizes, including 4mm, 6mm, 8mm, and 10mm, offering flexibility for various pneumatic configurations.
• Robust Design: Constructed from high-quality materials, these connectors boast robustness and resistance to wear, guaranteeing extended service life even in demanding operational environments.
• Easy Installation: The connectors' design facilitates swift and straightforward installation. Their secure grip on the tubing prevents unintended disconnections and maintains consistent air pressure levels within the system.
• Minimized Air Leakage: Precision construction and effective seals within the connectors reduce the risk of air leakage, ensuring efficient pneumatic system performance while minimizing energy wastage.

• The air tube is fast - connected with this 1/4 plug, and the size is standard, which can be tightly connected without air leakage.
• There are a total of 100 pneumatic connectors, sufficient in number, and convenient to replace old or damaged parts.
• Made of high - quality plastic material with good abrasion resistance, and the pipe joint can be rotated at will after it is connected.
• The exterior of the pipe plug is glossy and burr - free, compressive and anti - aging, and the air pipe connection is effortless.
• With good sealing performance, can withstand atmospheric pressure after installation, and is not easy to detach.

• Product Name : Pneumatic Brass Connector Model : PC12-04 Tube and Thread Size : 12mm OD x 1/2" G
• Operating Pressure : 0-0.9MPa ; Operating temperature0 - 60 Degree Celsius
• Vacuum: 0-29.5 inches Hg / 750mm Hg
• Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life.
• The joint is firm, convenient to connect, and not easy to loosen

• Dudhi Fiber Reinforced polymer - FRP products basically manufactured with world class technology by compressed molding system and the woven fiber fabrics are randomly arranged in it which provides more strength and flexible to the product within complex shapes. With the using of special quality raw materials the products having ability to sustain heavy load vehicular traffic moving on it apart from its aesthetics value.

• These pipe plugs can withstand atmospheric pressure without falling off, have excellent sealing performance and are easy to install
• The exterior of this pneumatic tube plug is smoothly and burr - free, resistant to compression, aging and wear
• The outer diameter of the plastic pneumatic plug has a number sign for easy identification, accurate size, and direct insertion and installation
• These pneumatic tube plugs are made of plastic material, which is environmentally friendly and corrosion resistant
• This pneumatic tube plugs are made with accurate workmanship, compact and durable

• Type:PC 8mm Tube Od x 1/2" NPT Thread Push to Connect Air Fittings; Body Style: Male Straight,quick and Reliable connections; Fluid Admitted: Air, Water (No Freezing)
• Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg; Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60 degreeC | 32?140 degreeF
• Body and collar are made of Nylon 6.6, gripping ring is stainless steel, D seal and O-rings are Nitrile- corrosion resistance, ductility;The Stainless steel gripping ring ensures excellent tube retention while the D seal within the fitting provides a positive seal on the O.D. of the tube in both static and dynamic positions, due to an optimized design of the fitting cavity.
• All items in Pneumatic composite range are silicone free,Elliptical sleeve help to connect tube easily by manual, no special tools required,Outside (Inside where applicable) hexagonal wrench tightening.
• This Quick fittings are only used for industrial automatic apparatus and can not be applied on any medicinal equipment.