Lovely Through Bolt/Wedge Anchor/Wedge Fastener (8 x 75 mm) -Pack of 10 Pcs. - Product Features
- High-performance stud anchor with optimised expansion cone and wedge design combined with special steel and coatings for outstanding performance in cracked and uncracked concrete
- Raised impact section prevents thread damage during installation
- Pre-Fastening, Through-Fastening. Externally Threaded
- Material composition: Steel, Zinc-plated. With SS Clip
- Environmental conditions: Indoor, Outdoor, Dry & Wet Conditions
Simpson Strong Tie S4SN75 Shake and Siding/Roofing Nail 4d 1-1/2-Inch by 0.083-Inch with 7/32-Inch Head Diameter, Stainless Steel - Product Features
- Approximately 394 nails per pound
- Ideal for all types of shakes and shingles
- Checker pattern on heads blends wood grain and reduces sun glare
- Annular ring shank increases pull-out resistance
- Diamond point for easier driving
HILLMAN FASTENERS 461513 LB 2.5" Galvanized Roof Nail - Product Features
- The product is 2-1/2" x 11 Gauge, Fans-Rite Electro Galvanized, Roofing Nails
- Easy and simple use kit
- The product is manufactured in China
YG ELECTRICAL SERVICE Roofing Bolt - Product Features
Jaset Innovations Stainless Steel Anchor Fastener 304 Grade Rust Proof Expansion Type 8mm Bolt, 75mm Length Pack of 5 Pieces - Product Features
- 304 GRADE HIGH QUALITY STAINLESS STEEL Better corrosion and intergranular resistance than any other type of Stainless Steel.
- STRONG AND THICK EXPANSION SLEEVE The Sleeve is designed much thicker than its normal standard, which apparently adds its strength and make it smoother to use.
- HIGH LOAD CAPACITY The notched nut with thick sleeve can bear heavier loads and has high strength.
- WIDE APPLICATIONS AND EASY TO INSTALL Used in many applications and wide variety of masonry, solid concrete, brick, or block to fix Air Conditioning, Window, Canopy, Home Decoration, Fence, Doors and many more.
- SPECIFICATION AND QTY 8mm Bolt Diameter and 75mm Length, Hex Head, Pack of 5 pieces. Recommended Drill Diameter = 12mm.
Easy Set Zinc Plated Pin Drive Expansion Bolts-Hammer Strike Pin Anchor Fasteners- in Variable Sizes (10mm X 100mm), Pack of 10 PCS (Gold), pin fasteners, pin type fasteners - Product Features
- Rounded end for easy insertion I Anchor diameter matches drill bit diameter
- Flat head impact section to prevent thread damage during installation
- Great for use in untracked concrete, lightweight concrete, lightweight concrete and masonry (grout-filled CMU)
- Carbon steel, electroplated with zinc at a minimum of 5 microns
- Dia:6MM I Threads Per Inch(TPI):1.0
LOVELY 12X150 MM Through Bolt Fastener Set of 3 Pcs. - Product Features
- Need to use 12 mm diameter drill bit for drilling holes, the drilling depth should be greater than or equal to 130 mm. Load bearing upto 2.50 KN (250 KG Approx). Outer diameter approx 12 mm
- Through Bolt Fastener Length 150 mm, Drill Dia 12 mm, Bolt/Screw width-12 mm.
- Raised impact section prevents thread damage during installation. High-performance stud anchor with optimized expansion cone and wedge design combined with special steel and coatings for outstanding performance in cracked and uncracked concrete. Pre-Fastening, Through-Fastening. Externally Threaded.
- Material composition: Steel, Zinc-plated. With SS Clip. Environmental conditions: Indoor, Outdoor, Dry & Wet Conditions.
- Package Content- 3 Pcs. of Through Bolt Fastener.
100 Qty #10 x 1/2" Zinc Hex Head Roofing Screws w/Bonded EPDM Washer (BCP1088) - Product Features
- Self drilling metal to wood screws
- Bonded EPDM neoprene washer for a watertight seal
- Hex washer head for fast and secure installation
- Premium zinc plated finish for long lasting corrosion resistance
- Ideal for attaching metal roofs and wall panels
BOUN GROUP Wedge Anchor Fasteners Ms (10x75) - Product Features
- Very useful product
- Wedge Anchor Fasteners
- Easy to install
LOVELY 10X150 MM Wedge Expansion Fastener (Set of 3 Pcs.) - Product Features
- Need to use 14 mm diameter drill bit for drilling holes, the drilling depth should be greater than or equal to 145 mm. Load bearing upto 1.50 KN (150 KG Approx). Outer diameter approx 14 mm
- Wedge Expansion Fastener Length 150 mm, Drill Dia 14 mm, Bolt/Screw width- 10 mm.
- Ideal for Industrial/Commercial Construction Site Purpose.
- Ideal use for fitting in Concrete.Tested in Govt. Approved Labs.
- Package Content- 3 Pcs. Wedge Expansion Fasteners.
HILLMAN FASTENERS 461347 3" 10D Spiral Deck Nail - Product Features
- The product is lb 3"10d spiral deck nail
- Easy and simple use kit
- The product is manufactured in china
HILLMAN FASTENERS 461487 5 lb 3" Galvanized Deck Nail - Product Features
- The product is 5LB 3" Galvanized Deck Nail
- Easy and simple use kit
- The product is manufactured in China
HILLMAN FASTENERS 461348 LB 3.5x16 Galvanized Deck Nail - Product Features
- The product is LB 3.5x16Galv Deck Nail
- Easy and simple use kit
- The product is manufactured in China
BITCORP Wall Anchor Fasteners Size 6 mm to 12 mm Pack of 12 PCS (Gold) (6mm) - Product Features
- quantity 12 pcs . color : gold rust proof
- No expansion force - unlike plugs or anchors - you can place nearer the edge without risk of fracturing
- Eliminates line up problems - drill the pilot hole direct into material and substrate
- Suitable for a variety of substrates - concrete, solid, perforated or hollow bricks, natural stone, marble etc
- New easy fix - relief thread is easier to tighten especially at a lower torque than traditional plugged fixings
Elegant Casa 6mm Wall Anchor Fasteners, Rust-Proof Expansion Screws for Concrete Walls Mounting Shelves Cabinets, Other Furniture (Gold, 12 Pcs) Head Set - Product Features
- Total 12 pcs 6mm wall anchor fasteners is a high-grade hardware device that temporarily joins 2 or more objects together the anchor is inserted into the hole and secured by applying a specified torque to the bolt head or nut with a torque wrench
- Rust-proof the offered bolts Rawal fastener set has rust-proof nuts with sealing properties that ensure the joined objects remain jointed for longer. It shows no damage whatsoever even in contact with air and water
- Easy fix the relief thread source fastener made in India is easier to tighten, especially at lower torque than traditional plugged fixings. It means you can safely hang anything on the wall without breaking the fastener
- As shown in the figure tightening the bolt results in a wedge being driven up against a sleeve which expands it and causes it to compress against the material it is being fastened to
- The anchor is inserted into the hole and secured by applying a specified torque to the bolt head or nut with a torque wrench
Bright Zinc Plated Steel Roofing Bolts - Mushroom Head Roofing Bolts in Variable Sizes (100, 30mm) - Product Features
- Pack of 100pcs
- Anti Corrosive Zinc Plated Finish
- Length:30mm I Thickness:6mm
- Supplied with hex nuts