Stainless Steel Railing By CKE

• Features: These fittings are used for 3/16" wire rope cable and compatible for installation on exterior decks, marine rigging, or interior applications. With a inner hexagon screw on the top. Invisible and concise appearance after being installed.
• Material: T316 Stainless Steel, Marine Grade with High tensile strength and Weatherproof strength.
• Size: Overall length of the Receiver: 2.25", Threaded stud length: 2.75", Assembled and Fully Threaded size: 2.95".
• Applications: Provide for a DIY cable railing project, it can be used on all sorts of posts in wood or metal. Suitable for indoor or outdoor applications.
• Package: 40 Pack Stainless Steel Invisible Receiver and Swage Stud End

• Feature: This 45 Degree 1/8" Wood Post Protector is a hole finishing fitting for 1/8" Cable runs where the hole is drilled at an angle near 30 degrees in the post. Use this fitting to cleanly finish drilled holes on intermediate angled posts on stairways and ramps.
• Material: Made of T316 marine-grade stainless steel. High tensile strength and anti-fatigue strength Weatherproof.
• Size: Tilt Angle = 45 Degree, Overall Length of Sleeve = 1.1", Sleeve Diameter=0.28"?Flange Diameter =0.71"(The longest diameter of an ellipse)/0.51"(The shortest diameter of an ellipse), Drill Bit Diameter = 7mm.
• Design: Exclusive Patent Design Product.Often used in conjunction with straight wood post protectors, this 30 degree wood post protectors transition wood post protectors from straight runs transitioning to an angled run. Widely used this on intermediate angled posts on stairways and ramps, it can replace the combination of Straight Protector Sleeves + 45 Degree Angle Beveled Washer, create a cable railing system that exposes your beautiful view while only exposing a nearly flush fitting head.
• Package: 40 * 45 Degree Stainless Steel Protector Sleeves + 1 * Drill Bit.

• Features: These Stainless Steel Protector Sleeves prevents cable from wearing into post, and keep to maintain cable rail tension for preventing wire rope vibration.
• Material: Made of T316 marine-grade stainless steel. High tensile strength and anti-fatigue strength Weatherproof.
• Compatibility: These Stainless Steel Protector Sleeves suitable for 1/8" Cable Railing, perfect for DIY your own cable railing project, good for indoor or outdoor applications.
• Size: Overall Length of Sleeve: 3/4", Flange Diameter: 1/2", Required Hole Diameter: 1/4", Drill Bit Diameter: 6.5mm.
• Package:80 * Stainless Steel Protector Sleeves and 1 * Drill Bit.

• Compatibility: These end terminals for 1/8" wire rope cable, Swage Threaded Stud includes washer and lock nut.
• Material: Stainless Steel T316 Marine Grade,High tensile strength and anti-fatigue strength Weatherproof.
• Size: Overall Length = 3-7/8", Thread Length = 1-7/8" - 1/4" - 20, Hole to Drill=0.25".
• Applications: Perfect for installing a DIY cable railing system project, excellent for both outdoor and indoor application.( wood, steel, aluminum post on deck railing).
• Package: 60* Threaded Terminal Studs ( includes washer and lock nut).

• Applications: Fit 1/8'' stainless steel cable.This adjustable angle cable railing kit has 180 degree angle freedom adjustable base,can be used at angle stair railing or Horizontal cable guardrail. Suitable for outdoor or indoor.
• Material: 316 Stainless Steel, Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results.
• Size: Turnbuckle: 7.2" Deck Toggle End: 3"
• What You Get: 12 Pcs Deck Toggle Turnbuckles, 12 Pcs Deck Toggle Ends and 48 Pcs Screws.

• Compatibility : Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power:10 tons. Stroke : 12mm. The hydraulic crimper is suitable for power wires, electrical cables, battery cables and welding cables. Cable Cutter Cuts up to 5/32" stainless steel cable.
• Material: Made of durable materials with high strength and good toughness. Dies are made of hardened steel with chrome finish.Vinyl-dipped grip for comfort and easy control. Cable Cutter: Using SK5 high carbon steel Seiko forging, durable.
• Size: Hydraulic Hand Crimper Tool: Length:approx.310mm, Weight:approx.N.W1.75kg G.W3kg. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces.
• Easy to use: On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. The C-style head makes side entry easier to change the dies.
• What you get: Includes die positioning pin, seal rings, strong protective carrying case, cable cutter and pair of work gloves.