Stainless Steel Railing By Steel DN Mate

• Material?The cable railing kit is made of T316 stainless steel marine grade, which is strong tensile strength, very sturdy and durable. It is rust and corrosion resistant, designed to install indoor and outdoor deck railing, even in coastal areas. Steel DN Mate offers refund guarantee if the sleeves rust. Please download the ?User Manual (PDF) under Product guides and documents.
• Stylish clean appearance but the most cost effective. This cable railing kit covers the rough holes after drilling, provides a stylish clean. This cable railing system wont block your view when you rest on deck. Also nearly no maintenance required. Unlike turnbuckle systerm, this simple deck cable system, (protectors+ lag screw) cuts down the cost by 33%. We think it combines of strength, light weight, appearance and cost effectiveness, perfect for residential or commercial.
• Protect posts and maintain cable tension. This stainless steel protective sleeve is designed to prevent damage to the relatively soft wood posts from friction wear. It can maintain the cable tension to prevent vibration. Important Note, this level cable railing hardware can only be used in intermediate wood posts, not suitable for metal or angle posts.
• Size: Sleeve total length: 51/64 inch; Sleeve hole inner diameter: 5/32 inch; Drill Bit Diameter: 6.5MM. These T316 protector sleeves fit for 1/8" cable railing system. Calculation of sleeves quantity needed: 2 × QTY of intermediate posts × QTY of cable runs. Package list: 60 PCS stainless steel protector sleeves, a PC drill bit.
• DIY a 1/8 cost-effective cable railing project, refer to Picture NO. 5: Protector sleeves DP10, 1/8" steel cable with cutter DW22, hydraulic crimper DC01, swage lag screw DM30, drill jig DG12. For the angle stair balustrade hardware, angle protector sleeve DF05 is recommended. You can scroll down this page to buy them all from Steel DN Mate in 2 minutes.

• This Cable Railing Protective Sleeve's Material:316-Stainless Steel,Anti-rust
• Sleeve length?0.8 inch?Sleeve ID:5/32 inch?Fit 1/8 inch Wire
• These sleeves are generally used for wooden posts
• Need to get exDrill bit length?4 inch

• This Deck Cable Railing Kit is integrated design. Made of high quality T316 marine grade stainless steel, it's anti-rust and anti-corrosion, so more durable.
• The angle of this professional cable railing hardware could be free adjusted from 0 to180 degree, see picture 2 ?so they can be used to any angle stairs railing or horizontal cable guardrail.
• Hydraulic crimper is need to connect this kit with the cable and we recommend 4-6# dies. It is a little trouble to use hydraulic crimper, however this installation is more durable and beautiful.
• It applies to standard 1/8" cable, External diameter is 0.38", internal diameter is 1/8 ". perfect to work with 1/8 inch (3.2mm) stainless steel wire rope to timber posts. Please search B07TDLJC3W for to get the paired steel cable.
• Come with 10pcs stainless steel tensioner ends and 10 pcs standard ends screws and 40 pcs suitable screws.you can create 10 runs cable railing. With high quality and excellent workmanship, we believe that you will like this kit. If you have any question, please contact us directly.

• New deck railing design, clean and elegant. This cable railing kit includes 60 pcs left, 60 pcs right hand thread lag screws, 1 patent design wrench and 2 drill bit. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier.
• This deck railing hardware fit 1/8" OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable.
• Length of cable should be 1-1/2" shorter than wood surface distance?as shown in pic.4); if you want to DIY a high quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended.
• By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing wont be easily unfixed or destroyeded.
• The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. Hydraulic crimper is needed to connect the cable to lag screws. Please search on amazon" B0B71J2DXD" if you need black swage screws.

• New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, terrace railings, and deck railings. With our new made wrench, installation becomes much easier.
• This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer.
• Length of cable should be 1-1/2" shorter than wood surface distance?as shown in pic.5); if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended.
• The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A hydraulic crimper (Search ?B08BQVKM2Z on Amazon) is needed to connect the stainless steel cable to lag screws.
• We have perfect after-sale service. Steel DN Mate offers with a 10-year warranty Free Service. --If you are a new beginner or not sure how to do it, please contact us by clicking on "by Steel DN Mate" below "add to cart." Let's help you, then you can follow the shopping list to buy all the items needed in 1 minute.

• T316 Marine-Grade stainless steel -- This product is made of T316 stainless steel, rust-free, corrosion resistance and durable, fit for indoor and outdoor applications, including coastal areas.
• Specification -- Terminal length 2", tensioner length range from 2 11/16to 3 3/4. Fit for 1/8 steel wire cable railing with 2"×2- 4"×4 Metal and Wood structure posts.
• Clean Look& Easy installation-Both the terminal and tensioner are hidden in the post, makes this system looks elegant, neat and beautiful. With our allen wrench and your vise grip ( prevent spinning), you can easily install and detach. We offer one stop shopping, scroll down this page to see Cables, Crimper, sleeves etc sold by ?Steel DN Mate.
• Design Invisible high quality installation -- With this patent designed invisible turnbuckle kit, you can get the cable railing kits hidden inside the wood and metal post system.
• Packing and warranty -- This package includes 5 PCS Terminals, 5 PCS Tensioners, and a hex. You can build 5 runs with this hardwares.